On the basis of ZAZ-1102, the plant produces Tavria. models ZAZ-110206, ZAZ-11022, ZAZ-11021 and ZAZ-11024. ‘
Model ZAZ-110206 is a modification of the base model for export.

Model ZAZ-11022 - upgraded car... The ZAZ-11021 model differs from the ZAZ-11022 in a modified instrument panel, a four-spoke steering wheel, a double-lever multifunction switch under the steering wheel and additional equipment that increase the comfort and safety of the car. Description, controls and features of the device of this car are given at the end of the manual.
Model ZAZ-11024- a utility vehicle, which differs from the ZAZ-11022 in a modified back door or a modified rear door and welded-in sidewall window caps. A description of the features of this vehicle is given at the end of the manual.
The specified models, depending on the version, may have a different complete set.
"Tavria"- four-seater comfortable high-speed modern minicar - has a front engine and front-wheel drive.
The front-wheel-drive layout with a transverse engine, applied for the first time on cars of an especially small class, made it possible to increase the size of the passenger compartment, to have a two-volume, easily transformable luggage compartment in passenger and cargo-passenger versions.
The compact power unit consists of an in-line four-cylinder carburetor engine liquid-cooled, dry single-plate clutch with diaphragm spring, five-speed gearbox and cylindrical final drive.
The use of a toothed belt in the drive of the gas distribution mechanism and an improved carburetor made it possible to reduce engine noise, increase its efficiency and reduce the toxicity of exhaust gases.
The drive is carried out to the front steered wheels by shafts with constant velocity joints.
The front suspension has spring elastic elements and telescopic shock-absorbing struts of the "swinging candle" type. Rear suspension with spring elastic elements and common anti-roll bar does not require wheel alignment. Both suspensions have no lubrication points.
The steering gear is rack-and-pinion type, significantly improves maneuverability and facilitates driving.
Double-circuit brake system with diagonal hydraulic drive, disc brakes of the front wheels with a floating caliper, rear - drum brakes with automatic adjustment of the clearances between the pads and drums meet modern safety requirements.
Wheels - disc, covered with plastic decorative caps.
Tires - radial, low profile.
The car body is a three-door, has a shape that meets the modern requirements of aesthetics and aerodynamics.
Heating and ventilation create comfortable conditions in different climates.
For interior decoration, fabrics made of artificial fibers and plastics are widely used.
It should be noted that a number of large body parts are made of plastics.
High performance of the car, its reliability and minimum labor intensity of maintenance largely depend on the observance of the rules of operation and maintenance of it.
The car is designed for operation on improved roads with a capital surface in good condition.
Engine design using appropriate winter oils ensures its reliable start at a temperature of minus 25 ° C (248 K).
The plant reserves the right to make changes in the design of the car aimed at improving it, which may not be covered in the manual.

Ignition system (SZ) vehicle includes many nodes and devices interconnected. One of the main components of such a system in ZAZ cars is a distributor. How to correctly install the Tavria distributor, what malfunctions are characteristic of this device and how to repair it, we will describe below.

[Hide]

In what cases is ignition installation necessary?

Adjustment and repair of the ignition system

How to properly adjust the system operation? If you do not know how to set the ignition on Tavria, then we are ready to teach you this. The principle of setting SZ is to change the position of the valve in relation to the installation volute. Before you start tuning, you need to open the hood and look at this snail and distributor. Put labels on each element - this will allow everything to be returned to its place if you make mistakes during the repair process.

The setup procedure looks like this:

1. Get behind the wheel, put the key in the ignition of your Tavria and start the engine.
2. Then, on a running power unit, you need to slightly crank Switchgear- first in one direction and then in the other direction. At this moment, you need to listen to how the engine works, whether the dynamics of revolutions has changed. You need to catch the moment when the engine speed will be at its maximum. Usually this is not a specific point, but a place in half a division on the site. The most optimal ignition is in this range. If the power unit of your car works with detonation, then try setting a later ignition.
3. Then the distribution unit must be fixed in this position, and then diagnose the internal combustion engine's performance in different operating modes.
4. When the distributor is fixed, you need to ride a little. Accelerate the vehicle to approximately 60 km / h, shift into fourth gear, and then slow down to approximately 40 km / h and press the accelerator pedal sharply again. At this moment, detonation should appear, but literally for 1-2 seconds, no more. If so, then we can assume that half of the work is done.
5. In addition, you also need to check and internal combustion engine power... In the event that the engine power is not particularly high, then you can try again to adjust the distributor drive. In this case, you will need tweezers, as it will make this task much easier with its help. If you look at the distributor, you will notice that the cut under it on the drive is slightly offset to the side, so you should not make mistakes and install the drive incorrectly (the author of the video is the channel).

You can also adjust the distributor itself, the essence of this task is to change the level of tension of the weights, as well as setting the vacuum regulator. But keep in mind that to implement this procedure, you will need a special stand, which can not always be found even at a service station.

Photo gallery "Self-adjustment of the distributor"

Device malfunctions and remedies

For what reasons the distributor may refuse to work and how can the situation be corrected:

1. The connection of the distribution unit is loose, which led to the incorrect operation of the motor. Due to the loosened fastening, the lead angle could be lost, which in turn would lead to a difficult start, a decrease in power, as well as unstable idle speed. Fuel consumption will also increase. In this case, you just need to tighten the screw that secures the device using a wrench.
2. Connected to the distribution mechanism high voltage wires in the wrong sequence. This can lead to the fact that the internal combustion engine will not start at all or will start, but at the same time pops will be heard from under the hood, the car will go jerky. Open up service book and specify how the high-voltage wires should be connected, reconnect them.
3. Another malfunction is the broken mechanism cover. As practice shows, the breakdown site is usually clearly visible even with the naked eye. Due to breakdown, current leakage is possible, which contributes to malfunctions in the operation of the internal combustion engine. In this case, the only option would be to replace the cover.
4. Oxidation or destruction of contacts has occurred in the distributor cover. If we are talking about oxidation, then you can clean the contacts with a solvent, but if the problem is destruction, then the elements must be replaced.
5. The contact ember on the cover is worn out, and the motor will be difficult to start. Either the coal or the cover as a whole is replaced.
6. Hall sensor breakage. Such a malfunction will lead to the impossibility of starting the motor, the controller should be replaced. It is possible that there was a break in the wiring from this controller to the connector, then the device needs to be checked more carefully.
7. The upper bearing is worn out. Unstable idle speed... The problem is solved by replacing the roller with a centrifugal regulator, as well as a bearing device. Or the distribution mechanism will have to be changed completely.
8. The vacuum advance regulator is out of order. With such a malfunction, the transport power unit will not be able to pull the car uphill, the engine power will significantly decrease, as well as its throttle response. This is due to the fact that the regulator itself is used in order to set the lead angle a little earlier in the high load mode on the motor. The reason may lie in the lack of tightness of the body of this device or in the jamming of the nozzle from the carburetor connected to it. Also, the problem may be a malfunctioning swivel plate. The solution to the problem may be to eliminate problems with tightness or replace failed components. In extreme cases, you can completely replace the regulator.
9. Problems in the operation of the centrifugal regulator. The symptoms will be similar. As for the reasons, it is necessary to check the springs of the loads, they could weaken or fail as a result of wear, the damper rings of the weights could also be lost, the weights themselves may jam. It is necessary to dismantle the distributor and replace the regulator itself, since its repair in most cases is impractical.

Attention! A lot of documentation on the repair of Tavria (at the time of this link - 12 books have been collected) can be downloaded by you to.

General information about the car
Controls and instrumentation
Appearance and fastening of the power unit
ICE engine Tavria 1140 (Fiat)
Maintenance of the Solex carburetor (Video)
crank mechanism
Gas distribution mechanism
Lubrication system
Cooling system
power supply system gasoline pump, carburetor (documentation),
regulation of the XX "Solex" system (video)
Description of the power supply system (SRVT) of the injection Tavria (Slavuta) engine (MeMZ 3071 engine)
The design of the SRVT fuel system of the MeMZ 307 engine (Tavria / Slavuta / Sens)
Clutch
Transmission
Final drive with differential and drive shafts Undercarriage
Front suspension
Rear suspension Wheels and tires
Control mechanisms
Steering
Brake system
Electrical equipment
List of points of connection of mass (mass / earth) "Tavria"
Wiring diagrams Battery
Old type of generator
New type of Generator (97T.3701)
Starter
Ignition system
Ignition switch with anti-theft device Lighting and alarm
Windscreen wiper and washer Windshield wiper and washer Rear door glass wiper Cooling fan motor Heater blower motor Instrumentation
Body and heating system
Stove Tavria
Body
Interior heating and ventilation Application.
Rolling bearings

Regarding the repair of Tavria ... this is not a cosmic-complex process, in principle it can be learned.
To do this, read the following materials on our website

• Tavria, repair manual. On this page, I have collected books and printed materials that can help in repairing the HARDWARE.
• Some materials for the repair of "Tavriy" are posted in the Repair section of our website. Basically, this is what I did on my own;
• on the forum of our site, in the FAQ section, there is a collection of FAQs on components and assemblies;
• Again, you can ask your questions on our Forum, in the Repair section.
• A general description of the design from the album of K. S. Fuchadzhi, on which it was health to print by hand and correct, -. Maybe someday I will finish this work, in the meantime I try to "drive in" a little on weekends ...
• Torrents, which contain many books on repairing Tavria, full list their - .

Repair of Tavria, how to be and who to entrust?

Repair of "Tavria" (as well as repair of "Slavuta") is not such a difficult process. This is not a BMW or Mercedes-Benz. Everything is simple here. If not for the totally poor quality of parts and assembly, service, this car would be one of the most reliable cars, by the way. Well, like all small cars. Therefore, I will offer you to repair this machine yourself. This is not a fiction, the service will not want to serve you. The car is too unattractive. from the point of view of locksmiths. After all, for work on different cars In principle, the money for the service station is not paid much, and then they are different. I'm not talking about official stations that re-mount Ferrari and Land Cruisers, I'm talking about normal stations. So it turns out that the repair of an old Mercedes is easier and faster than Tavria, and the first to promise big money, and significantly, because the brand is more prestigious.

And yet ... when buying this car, you should clearly understand - Tavria / Slavuta / Date and repair, in principle, are indistinguishable concepts. True, there are unique people who manage to achieve long-term operation from the car without breakdowns. Honor and glory to them, but for the majority this unit breaks down, and constantly. You can see how and what is happening in the Log section of my site. In short - the cause of breakdowns, - incorrect operation, then the unreliability of parts, and only after that - mistakes in the design of the machine.

Brand - books you can still buy

Rank Publishing publishes a repair manual, which contains all the necessary information. I recommend buying this book "on paper" rather than downloading it from various sites. Why? Very simply, there may not be Internet on the way, but it will be necessary to repair! Here is a link for you, delivery is available both in Ukraine and in Russia. By the way, there is another book in the catalog, only for 1102. Take both. For such a penny, how much they cost now - you can spend money! By the way, I ordered the first one in 2007, and the last one in 2009, when I wrote this ...

"Tavria" refers to cars of the 2nd class (budget models). Initially, it was produced at a Soviet plant, but later the bulk began to roll off the assembly line of the same, but already Ukrainian ZAZ. The first exclusive piece became the "parent" for a huge number of different models and their modifications, which were combined into a giant series.

You can easily remember about 40 different cars... It is worth noting that they were in high demand among the domestic buyer. The end of the large-scale release took place in 2007.

Development history of ZAZ "Tavria-1102"

The development of a new (at that time) car "Tavria" began due to the need to replace the models. By the 70s, two variants of the car were created in the form of a sedan and a hatchback. But production permission was received only 10 years later. After the exit of a large party, the leadership changed the task of this machine. It was agreed that the model should be similar to the leader of European sales (we are talking about "Ford Fiesta"). An experienced designer working at a plant in Zaporozhye has repeatedly said that the American "child" has nothing in common with advertising. If bright posters and videos made an ideal car out of Fiesta, then in reality it did not meet many of the declared characteristics. Therefore, technically bypassing it was not a very difficult and time-consuming process.

The Soviet auto industry constantly demanded from the manufacturer to improve the "Tavria", setting it more and more difficult tasks and goals. The first production model to be sold throughout the Union was a copy released in November 1987.

Specifications ZAZ-1102

"Tavria" has a hatchback for 3 doors. Passengers fit 5 people. The weight of the car is just over 1100 kg. Vehicle length - 3700 mm, width - 1550 mm, and height - 1400 mm.

The engines have a volume of 1.1, 1.2 and 1.3 liters. Power is 53, 58 and 63 hp. with. respectively. Maximum acceleration (speed) - 145, 158 and 165 km / h, depending on the unit. You can gain 100 km / h from a standstill in 15-16 seconds.

Detailed description of the vehicle design

• The door to the rear of the machine is equipped with a special lock that is installed inside.
• Lubrication, or rather its system, is of a combined type.
• The crankcase ventilation system is closed and passes through the carburetor and air cleaner.
• The carburetor installed on the ZAZ-1102 has an emulsion type.
• The cooling system is located in the radiator, and it turns on automatically when necessary. The exact location is the casing.
• Ignition - battery. The plugs have a screw-in length of 18 mm.
• The vehicle exhaust system (muffler) has been set by the manufacturer.
• The clutch is dry.
• The transmission is mechanical.
• The brakes are of different types. Parking - manual type, rear - drum, and front - disc.

The figure below shows a diagram of the ZAZ-1102 (we are talking about electrical wiring).

Lineup "Tavria"

The ZAZ-110240 car began production in 1991. Production continued until 1997. In this model, the trunk has expanded volumes. There is a side passenger sofa. Unlike the sedan, these specimens differ in carrying capacity. The car rolled off the assembly line for the second time in 1999. Its predecessor, ZAZ-1102, was already far behind in development from the described model. A new version differed installed engine... A large-scale release of a sanitary modification was planned, but the desired did not come true.

The Tavria cargo model was named ZAZ-110260. There were no passenger seats, except for sitting next to the driver. The car is capable of carrying loads up to 300 kg.

The next interesting model is ZAZ-110260-30. A small hole for the antenna could be found in the roof of this modification. The car had a distinctive feature - the presence of a function automatic switching on low fan speed. Special plugs were installed on the bumpers.

"Slavuta"

"Slavuta" rolled off the assembly line from 1999 to 2011. It belongs to category "B". Installed body type liftback. The engines with which these models were equipped are designed for 1.1, 1.2, 1.3 liters (carburetor), as well as 1.2 and 1.3 liters (injection). The development of "Slavuta", which is associated with ZAZ-1102, began due to the fact that "Dana" did not meet the modern requirements of drivers at that time, due to which it was not in great demand. Almost six months later, 1.1 liters was replaced by an analogue of 1.2 liters. And in 2002, the most expensive model for the entire production period appeared on the markets - a car with injection motor 1.3 l. However, the latter option was not suitable for sale due to the severity of environmental standards. In January 2011, the plant stopped producing Slavuta.

The body has 5 doors, it is made of all-metal material, has a closed and load-bearing type. Rear glass opens together with the tailgate. The vehicle weighs 800 kg. The volume of the tank is 38 liters.

The engines that were installed at the "Slavuta" were developed and produced at the Melitopol plant. All units are designed for 4 cylinders. located at the back on the left. Ignition (ZAZ-1102 is equipped with a similar system) has a battery structure and contactless voltage at 12 volts.

"Dana"

The assembly of the car began in 1994. The last copy rolled off the assembly line in 2010. "Dana" is the owner of a 5-door body, which has significant differences from the original model. Although it was built on the ZAZ-1102, but the view is more new car has an original and organic design.

V standard configuration the car is capable of carrying loads up to 200 kg with five passengers in the cabin. One could get acquainted with the engine, which was installed on the model, while driving the original "Tavria". Initially, it was planned to equip Dana with a unit with a capacity of 60 Horse power, which was designed for 5 thousand revolutions per minute, but for some reason, the car with this engine never entered mass production.

The car belongs to the class "B". It is installed four-wheel drive... The gearbox is mechanical, and the engine is carbureted.

"Pickup"

This car is a modification of the original Dana model. Any customer could custom-fit a soft or hard top (optional) that easily turns the van into a haulage vehicle. The compartment where all the luggage is placed is separated from the driver's and passenger seats due to an ordinary partition with glass. The production of "Pickup", which is based on the car ZAZ "Tavria-1102", began in 1992 and lasted right up to 2014.

The units installed on the machine had different characteristics with regard to volume: from 1.1 to 1.3 liters.

Most of the details were borrowed from Dana. They differ among themselves rear bumper, lanterns of the same part of the car, a window in the partition (in a newer version, a lattice appeared on it). "Pickup" received updated side mirrors and an awning that can be installed on the grille of the cargo compartment, as well as a suspension. The repair of this model, as well as the repair of the ZAZ-1102, does not require much time, effort and money. Therefore, such a machine is in high demand.

• Tavria 1102 vehicle characteristics
  

Rice. 1. Car ZAZ-1102 "Tavria":
1 - ignition coil; 2 - engine; 3 - sensor-distributor; 4 - the hood; 5 - expansion tank; 6 - air cleaner; 7 - wiper blade; 8 - instrument panel; nine -wheel; 10 - rear-view mirror; 11 - sun visor; 12 - body; 13 - tailgate; 14 - tailgate stop; 15 - back light; 16 - back buffer; 11 - mudguard; 18 - muffler pipe; 19 - brake drum; 20 - shock absorber rear suspension; 21 - rear suspension beam; 22 - muffler; 23 - fuel tank; 24 - seat belt; 25 - rear seat back; 26 - rear seat cushion; 27 - outside rear-view mirror; 28 - front seat; 29 - parking brake lever; 30 - gearbox control mechanism; 31 - clutch pedal; 32 - spare wheel; 33 - decorative cap; 34 - wheel; 35 - hub flange front wheel; 36 - articulated shaft (semiaxis); 37 - front suspension strut; 38 - gearbox; 39 - accumulator battery; 40 - main brake cylinder; 41 windscreen washer tank; 42 - direction indicator; 43 - steering gear; 44 - starter; 45 - generator; 46 - radiator; 47 - front buffer; 48 headlight.





Rice. 2. The main dimensions of the vehicle (height is given without load)

Car ZAZ-1102 "Tavria"(Fig. 1) developed at the Zaporozhye Automobile Plant. The first batch of these cars was produced by the plant in 1987. The production of these cars is increasing every year.
In parallel with the base model ZAZ-1102 "Tavria" the plant produces cars various configurations which differ from the base one with a fabric carpet on the passenger compartment floor, seats with combined upholstery, installation of head restraints on the backs of the front seats, windscreen washer and wiper on the tailgate, moldings on the sidewalls of the body, etc. Basic model Tavria is complemented by three modifications of hand-operated vehicles for disabled people.
Car ZAZ-11027 "Tavria" intended for disabled people who have one leg injured, but have healthy hands.
The car is equipped with:
a special pedal (under the right or left foot);
double-lever switch for light signaling and windshield wipers; switch "mass".
Car ZAZ-11028 "Tavria" intended for disabled people who have both legs amputated or injured, but have healthy hands.
The car is equipped with:
manual control throttle valves carburetor;
a special electrovacuum clutch release drive;
manually operated hydraulic brake control;
double-lever switch for light signaling and windshield wipers; switch "mass";
a special handle (on the gearbox control lever) with a button for disengaging the electric vacuum drive for disengaging the clutch.
Car ZAZ-11029 "Tavria" designed for disabled people with one leg and one arm.
The car is equipped with:
a special pedal for controlling the throttle valves of the carburetor; an electrovacuum clutch release drive;
special hydraulic brake pedal;
control lever parking brake under the right or left hand;
a special steering wheel with a slip ring on the shaft.
A horn switch, a turn switch, a headlight switch, a wiper and washer switch, a gear selection ring are mounted on the steering shaft;
special foot switch for the transmission;
switch "mass";
a special speed limit sign on the front and rear windows.
Car ZAZ-1102 "Tavria" is a model of an especially small class (Fig. 2), fundamentally different from its predecessors. Each detail at Tavria is original in terms of layout and the most important technical solutions and corresponds to modern trends in the development of the automotive industry.
Front-wheel drive scheme, more modern, replaced the rear-engined, previously used on all ZAZ cars. Power unit, consisting of an engine, a gearbox and a final drive, located in the front of the body, is located across the engine compartment.

This arrangement and the transmission of torque to the front wheels made it possible to create a fairly spacious salon for 4 ... 5 people, have a two-volume, easily transformable luggage compartment in passenger and cargo-passenger versions.
When transporting large luggage backseat folds and the useful volume of the trunk increases almost threefold.
The car body is wedge-shaped, three-door, two-volume, hatchback type. Thanks to the large side doors, curved side windows, front anatomical seats with stepless backrest tilt adjustment and a wide range of longitudinal movement and rather wide rear seats, convenient entry and exit of passengers sitting in front and rear, convenient and comfortable seating and placement are provided.
The most important indicator of a car is its economy. This is achieved primarily thanks to an engine with a new combustion process, a high compression ratio, a two-chamber carburetor and a switched off fan in the cooling system. Affected here and the relatively low weight of the car, the new design of tires, five-speed gearbox overdrive gears, aerodynamically improved body shape.


Technical specifications car ZAZ-1102 "Tavria":

The number of seats, including the driver's seat ............................................ .................................. 4 or 5
Weight of cargo transported in luggage compartment, kg (no more) ................. 50
Permissible total weight of cargo in the roof rack, within
gross vehicle weight, kg ............................................. ................................................. ( not more) 50
Mach of an unloaded vehicle, kg ............................................. ................................... 660
»Equipped car, kg ............................................. ................................................. 710
Full mass car, kg ............................................... ................................................. 1110

Distribution of the load on the road from the car, N through the tires of the front wheels:
equipped ................................................. .................................................. .................................. 4312.0
total weight ................................................ .................................................. ................................ 5620.0
via rear tires:
equipped ................................................. .................................................. ............................... 2646.0
total weight ................................................ .................................................. .............................. 5274.7
Road clearances at nominal static radius of tires under load, mm:
under the spar ................................................ .................................................. ........................ 173
»Clutch housing ............................................... .................................................. .............. 162
»Rear axle cross member .............................................. .................................................. ..... 170
The smallest turning radius of the vehicle along the axis of the front track
outer (relative to the center of rotation) wheel, m, no more ................. 5
Outer overall radius of the vehicle at the outermost point front bumper farthest from the center
turn, m, not more ............................................ .................................................. ................. 5.5
Maximum speed car movements in fourth gear, km / h:
at full weight ............................................... .................................................. ...................... 140
with driver and passenger .............................................. .................................................. ... 148
Acceleration time from standstill with gear shifting to vehicle speed of 100 km / h, s (no more):
at full weight ............................................... .................................................. ......................twenty
with driver and passenger .............................................. .................................................. ... 17
Maximum rise, overcome by the car,%, not less ... 36
Braking distance of a car moving with full weight at a speed of 80 km / h on a horizontal, dry, level road section with asphalt concrete pavement, m, no more:
when using the service brake system ............................................. .......... 43.2
spare brake system ............................................... ............................................. 93,2
The total mass of the towed trailer (only with the use of special
special towing device), kg:
not equipped with brakes ............................................... ........................................... 300
equipped with brakes ................................................ ................................................. 600
Fuel consumption (when running on AI-93 gasoline), l:
at a speed of 90 km / h ............................................ .................................................. ................... 4.6
120 km / h .............................................. .................................................. ........................................... 6.6
when driving in the city .............................................. .................................................. .......... 6.8
Thanks to the front drive wheels and a rack and pinion steering gear, the Tavria has a fairly high directional stability, in general, the handling characteristics are noticeably improved, especially on slippery road surfaces. Front-wheel drive has created the basis for safer driving. It was this feature that contributed to the development and distribution of front-wheel drive vehicles.