What type of oil for kia ceed. Engine and transmission oils for Kia Ceed What is the oil in the Kia Sid 1.6 engine

Segment C car according to European classification Kia ceed was introduced in 2006. The model was intended for the European market and is produced in Slovakia. In 2012, the updated Ceed began to be produced with a redesigned design and richer equipment. The car has versions of a 3 and 5-door hatchback and station wagon and is equipped with 1.4, 1.6 or 2 liter petrol engines or 1.6 and 2 liter diesel engines, mechanical or automatic transmission gears and front-wheel drive. Since 2013, a sports version of the Ceed GT has also been produced with a 1.6 turbo engine producing 204 hp. Due to the low cost for its class, the model has gained great popularity in Russia. What kind of oil to fill in Kia engine Ceed depends on its type.

TOTAL QUARTZ 9000 HKS G-310 5W30 and TOTAL QUARTZ 9000 ENERGY 5W40

For Kia Ceed with gasoline engines, TOTAL QUARTZ 9000 HKS G-310 5W30 and TOTAL QUARTZ 9000 ENERGY 5W40 engine oils are recommended. TOTAL QUARTZ 9000 HKS G-310 5W30 oil has been specially developed for Hyundai cars and Kia and are used in many models at the first fill. This engine oil for Kia Ceed has high anti-wear and cleaning properties that guarantee engine protection in all driving conditions and extend its service life. Its high oxidative stability makes it possible to extend the oil change intervals within the limits recommended by the manufacturer (up to 30,000 km, depending on operating conditions).

TOTAL QUARTZ 9000 ENERGY 5W40 engine oil is universal and can be used in Kia Ceed cars with gasoline engines and diesel engines without a particulate filter. This oil protects the engine from wear and harmful deposits even in the most severe operating conditions, including sports, city driving with frequent stops and cold start... It meets international standards API SN / CF and ACEA A3 / B4 and can be used with extended oil drain intervals in both Kia Ceed generations.

TOTAL QUARTZ INEO MC3 5W-30

TOTAL QUARTZ INEO MC3 5W-30 engine oil belongs to the Low SAPS category with a reduced content of phosphorus, sulfur and sulphated ash, and can be used as an oil for Kia Ceed equipped with a diesel engine with a particulate filter (DPF). This oil provides a high degree of protection against wear of the engine and exhaust cleaning systems, which guarantees their reliable operation for a long time.

Transmission oil for Kia Ceed

For Kia Ceed vehicles with 5- and 6-speed manual transmissions, TOTAL recommends TOTAL TRANSMISSION DUAL 9 FE 75W90 transmission oil. This oil reliably protects the gearbox from wear and corrosion, and, thanks to the FUEL ECONOMY (FE) technology, provides a lower fuel consumption compared to conventional lubricants.

The choice of oil for automatic transmission Kia Ceed depends on the year of manufacture of the car. On cars of the first generation (2006-2012) a 4-speed gearbox was installed, for which TOTAL FLUIDE XLD FE fluid is suitable. Cars of the second generation (since 2012) have a more modern 6-speed automatic transmission, in which it is recommended to use TOTAL FLUIDMATIC MV LV oil. These transmission oils guarantee smooth gear shifting and protection of the unit from wear and ensure long and reliable operation of the gearbox.

Kia Ceed is one of the most popular hatchbacks in Russia. The machine is in high demand due to its quality and reliability. The machine is easy to maintain, but only if you follow the manufacturer's advice - for example, fill in only the recommended engine oil. In this article, we will look at the types and grades of motor oils for Kia rio and also call the best manufacturers lubricants.

Nuances of choice

Recommended parameters engine oil usually listed in the Kia Ceed user manual. In this case, in addition to the parameters, the manufacturer also indicates the seasonality of the fluids - for example, some oils are suitable for the summer season, while others can be used regardless of the season and climate. Each type of lubricant has its own characteristics and a specific chemical base.

When choosing one or another oil, first of all, one should pay attention not to the brand, but to the basic basis and support of the ambient temperatures in which the Kia Ceed will be operated. So, for too hot regions, excessive loads and an active driving style, synthetic is ideal, or semi-synthetic oil... As for old worn out motors with high mileage, for them mineral oil will be preferable.
You should also consider the presence of a tolerance. The tolerance allows you to determine how high quality and useful oil will be for a particular car brand.

Consider the choice of oil separately for each generation Kia Ceed

Lineup Kia Ceed ED FL 2010-2012:

For gasoline engines with a volume of 1.4, 1.6 and 2.0 liters, you should pay attention to the following parameters, as well as recommended brands:

For European countries:

API-SL, SM
ACEA-A3
Shell Helix Plus 5W-30; Helix Plus 5W-40
Shell Helix Ultra 0W-40; 5W-30; Helix Ultra 5W-40
Exoonmobil SHC Formula MB 5W-30

For the rest of the countries, the following standards apply:

API - SM, SL
ILSAC - GF-4 or higher

For diesel engines:

ACEA - C3
API - CH-4
ACEA - B4

For the first generation Kia Ceed, it is recommended to use oil with oW-40 5W-30 and 5W-40 parameters with support for temperature ranges from - (minus) 30 to +50 degrees - for European gasoline versions of Kia Ceed. In addition to European countries, you should fill in 20W-50 oil with a temperature range from - (minus) 6 to +50 degrees. An alternative option is 15W-40 with temperature support from - (minus) 15 to +50 degrees.

Lineup Kia Ceed GT / SW 2013-2014, as well as GT JD 2014-2015:

For gasoline engines 1.4 and 1.6 (for European countries):

API - SL, SM
ACEA - A5 or higher

For petrol engines 1.4 and 1.6 (for countries other than Europe):

API - SM
ILSAC - GF-4 or higher

For petrol internal combustion engines 1.6 T-GDI:

ACEA-A5
SAE 5W - 30

For diesel engines with a particulate filter (DPF):

ACEA - C2 or C3

For diesel engines without a particulate filter:

ACEA - B4

Helix Ultra AH-E 5W-30
Helix Ultra 5W-40

Helix Ultra AP 5W-30.

Owners of Kia Ceed with diesel engines are recommended to fill in 5W-30 liquid with temperature support from - (minus) 25 to +40 degrees, as well as 15W-40 with temperatures from - (minus) 17 to +50 degrees.

Lineup Kia Ceed JD FL / SW 2015-2017:

For petrol 1-liter T-GDI engines:

ACEA - A5 or higher
SAE 5W-30

For petrol 1.4-liter engines (for Europe):

ACEA - A5
SAE 5W-30

For petrol engines 1.4 (for countries other than Europe)

ILSAC - GF 4
API - SM
ACEA - A5
SAE 5W - 20

For gasoline engines 1.6 Gamma (for Europe)

ACEA - A5
SAE 5W-30

For gasoline engines 1.6 Gamma (outside of Europe)

ILSAC - GF-4
API - SM
ACEA - A5
SAE 5W-20

For diesel engines U 2 1.4 and U2 1.6 without particulate filter:

ACEA - B4
SAE 5W-30

For diesel engines U2 1.4 and U2 1.6 with a particulate filter:

ACEA - C2
SAE OW-30

If there are no SM, ILSAC GF-4, ACEA5 markings on the product label, then you can fill in oil with SL, ILSAC GF-3 or ACEA A3 parameters.

Helix Ultra AH-E 5W-30
Helix Ultra 5W-40

Helix Ultra AP 5W-30

Output

It is important to use the recommended engine oil that is suitable for the specific weather conditions. Or there is a universal oil, designed for the operation of the Kia Ceed, regardless of a particular ambient temperature. Correctly selected oil is a guarantee of reliable engine operation and an increase in its service life. To avoid premature overhaul, it is advisable to purchase only original oil, and only proven brands. But in any case, you need to start with the instruction manual, and then follow the advice.

Video

14.06.2017

In order to choose which oil to pour into the Kia Sid engine, you need to understand its main characteristics, markings, brands, type and some more points. If you take into account the most important of them and not be mistaken with the choice of the manufacturer, you can choose the ideal fluid that will effectively protect engine parts from wear for a long time, under different conditions of use with minimal consumption. To find out the main characteristics of LED oil, you can refer to the operating manual, however, there is little information about the types of fluid and its manufacturers, so the choice is limited to one or two brands. To choose from a wide range of car dealerships, you need to know a little more.

Kia Pro'Ceed 1.6 GDI

Viscosity grade and volume

The viscosity grade determines the ability of the engine oil to maintain the required lubricating properties under different temperature conditions. Fuel consumption and its operation in the cold season depend on the viscosity of the oil, which especially affects the start of the engine and its warming up. At low temperatures, it is better to use a fluid with a low viscosity index, this has a positive effect on the economy of the car and the protection of the working surfaces of the engine from wear. For high ambient temperatures in hot weather, it is better to choose an oil with a high viscosity.

V modern oils for automotive engines, the SAE coefficient is used to denote viscosity. It is usually indicated on canisters as one of the main markings. Consists of two numbers separated by the letter W and the sign “-“. Both of these are viscosity ratios under different conditions. The first designates the temperature at which oil can be pumped through the system and cause the engine to crank when starting. The second shows the viscosity when the motor is heated to operating temperature.

SAE engine oil temperature range table

In Kia Sid vehicles, it is recommended to use engine oil with a viscosity of SAE 5W-30 or 5W-40. This coefficient ensures optimal engine operation in a wide temperature range from -30 to 50 degrees. It is this marking that Kia recommends for its cars in European countries, regardless of the type of engine, its volume and the presence of a turbocharger.

Volume motor Kia Sid depends on the modification power unit and is:

3.6 liters for petrol engines 1.4 MPI, 1.6 MPI, 1.6 GDI;
4.5 liters for 1.6 petrol engines with a T-GDI turbine;
5.3 l. for diesel engines.

Resource

One of the important indicators of the quality of engine oil is its resource, that is, how long it can work without losing its characteristics. Most auto manufacturers recommend changing this fluid about every 15-20 thousand kilometers. However, oil manufacturers often claim that their products can travel several tens of thousands of kilometers without replacement and, at the same time, normally protect the engine from wear. Which of them exaggerates, and who is reinsured? The fact is that none of them can know exactly how much oil is capable of going away in your car, due to the fact that its resource strongly depends on the conditions in which the car is used. The car owner himself must monitor the condition of the engine oil and determine the need to replace it. If this is problematic, it is best to follow the replacement intervals recommended by the machine manufacturer.

The following factors affect the condition and life of the engine oil:

Vehicle operating conditions, the presence of so-called harsh conditions (traffic jams, dust, cold season, transportation of goods, and so on);
The age of the vehicle and its engine;
Fuel quality;
The quality and technology of the oil change procedure.

For MPI LED engines, when using 5W-20, 5W-30 oil under normal conditions, Kia recommends a replacement interval of 15,000 km or 12 months. For GDI - 10,000 km or 6 months. In severe operating conditions, and these include most conditions in large cities and other areas of Russia, the interval is recommended to be reduced to 7,500 km and 6 months for MPI and 5,000 km or 6 months for GDI.

Working fluid type

At the moment in car engines several types of engine oil can be used, differing in the type of production:

Mineral;
Semi-synthetic;
Synthetic.

Mineral oil is obtained by distilling crude oil and then enriched with special additives to improve performance. This type of oil has been used for a long time and has a number of advantages, despite the fact that now it is being replaced by other types, mainly synthetics.

Manufacturers often fill new cars with mineral oil, which can be used by the car during the entire break-in process. Some Kia models can be sold in salons with mineral water in the engine. This is due to its low price and the absence of the need for long-term use (the first maintenance with replacement by about 5,000 km). In some countries, car manufacturers recommend mineral engine oil for use as an original. This is also due to the fact that it is considered more environmentally friendly than synthetics.

Semi-synthetic motor oils are obtained by adding synthetic additives to mineral additives or mixing them with synthetics. Such types of liquids are poorly distributed, there are also few of them on sale due to displacement by the synthetic type.

Now in Russia, mainly synthetic motor oils are sold, they are also used for replacement. Such fluids are produced chemically, in which it is possible to obtain a composition that meets modern specifications and has the best characteristics.

Compared to other types of oils, synthetic oils have a number of advantages:

Compliance with higher requirements and complex technical conditions, which makes it possible to develop lubricating fluid for a certain modification of the engine, taking into account its features;
Better resistance to wear on working surfaces;
Fracture resistance and toughness stability at high and low temperatures;
Ability to work in forced engines with high rotational speed crankshaft and turbines;
Low oil consumption;
Increased replacement frequency;
Reduced fuel consumption.

The disadvantages of synthetics include a relatively high price and a more complex recycling process.

Selection lubricant you need to start with the instruction manual for a specific car model. The specified documentation describes the viscosity, type, class of the required oil. The purchase of the recommended engine oil for Kia cee’d will reduce fuel consumption, improve the performance of the power unit, and also increase the operating period of the engine and lubrication system.

Recommended engine oil for Kia cee'd is described in the car manual. In this documentation, the manufacturer not only indicates the parameters of the engine oil suitable for a particular car engine, but also focuses on the need to take into account the seasonality of the fluids. Depending on the season, there are lubricants developed for the summer, for the winter, or all-season. Each type of grease has specific characteristics and a unique chemical base that allows the Kia Seed motor to operate normally, depending on the operating conditions of the machine.

The selection of a lubricant is made taking into account the base base of the fluid and the temperature range in which it will be operated vehicle... For loaded working conditions and too hot climates, synthetics or semi-synthetics are better suited. In worn-out engines with high mileage, it is preferable to use mineral oil.

When buying motor fluid for Kia seed, pay attention to whether there are tolerances on the fluid canister. The presence of tolerances indicates the compliance of the engine oil with a particular car brand.

Kia сeed ED FL 2010-2012 model years

According to the manual for 1.4L motors; 1.6L; 2.0L, gasoline-fueled, use oils that meet the parameters:

For European countries:
according to API - SL or SM;
according to the ACEA - A3 standard or the highest class motor oil, approved for use
Except for European countries:

according to API classification - SM, in the absence of the specified motor oil, it is permissible to apply SL;

Based on the instructions, for engines powered by diesel fuel, it is recommended:

With DPF (Diesel Particulate Filter):

according to ACEA standard - C3:

Without DPF (Diesel Particulate Filter):

according to API specification - CH-4 or higher;
according to ACEA-B4 standard.

When choosing the type of lubricant, consider the temperature range in which the machine will be used. Select the recommended viscosity index from table 1.

* 1 - you can reduce fuel consumption by filling in SAE 0W-40, 5W-30, 5W-40 oil, according to API - SL and SM or ACEA - A3 and higher.

* 2 - SAE 5W-20, 5W-30 fluids can save fuel, according to API - SL or SM; according to ILSAC - GF-3 and more.

* 3 - if the mileage of the car in 1 year is 30 thousand km, while the maintenance standards are observed, it is permissible to use motor fluids SAE 5W-30, SAE 5W-40 or SAE 0W-30, 0W-40.

According to table 1, it is recommended to apply, for example, for gasoline units (for European countries): 0W-40, 5W-30, 5W-40 at temperatures from -30 0 С (or less) to +50 0 С (and more). In gasoline car engines (except for European countries) 20W-50 in temperature range from -6 0 С to +50 0 С (and more) or 15W-40 at temperatures from -15 0 С to +50 0 С (and more). In a similar way, liquids are selected for other temperature ranges.

Kia Ceed GT JD and Ceed SW JD 2013-2014, as well as Kia Ceed GT JD 2014-2015 model years

According to the instructions, you need to pour liquids with the parameters:

For gasoline engines 1.4 MPI, 1.6 MPI, 1.6 GDI (for European countries):

according to ACEA standard - A5 or higher class;

For gasoline engines 1.4 MPI, 1.6 MPI, 1.6 GDI (except for European countries):

according to API standard - SM;
in accordance with ILSAC - GF-4 or higher.

For 1.6 T-GDI petrol engines:

according to SAE 5W-30.

For diesel units with DPF (Particulate Filter):

according to ACEA - C2 or C3;

For diesel units without DPF (particulate filter):

according to the ACEA-B4 classification.

Gasoline power units:

HELIX ULTRA AH-E 5W-30;
HELIX ULTRA 5W-40;

Diesel car engines:

HELIX ULTRA AP 5W-30.

Table 2. Temperature range for recommended SAE viscosity grade values.

* 1 - filling SAE 5W-20, changing the car oil and oil filter is performed: after 15 thousand km for MPI engines and after 10 thousand km in the case of GDI engines under normal operating conditions. Under severe operating conditions, the fluid for MPI is changed after 7.5 thousand kilometers, and in the case of GDI, after 5 thousand kilometers.

* 2 - the use of fluids SAE 5W-20 or 5W-30 makes it possible to reduce fuel consumption, according to API - SM, according to ILSAC - GF 4 and more.

* 3 - SAE 5W-30 allows to achieve greater fuel economy, according to ACEA - A5 and more.

According to table 2, for diesel car engines, for example, at temperatures from -25 0 С to +40 0 С, 5W-30 liquid is suitable, and in the temperature range from -17 0 С to +50 0 С (and more) it is better to use 15W- 40.

Kia Ceed JD FL and Kia Ceed SW JD FL 2015-2017 model years

According to the manual, it is necessary to use oils that meet the requirements:

In Kappa 1.0 T-GDI engines running on gasoline:

according to ACEA - A5 or higher;
according to SAE 5W-30.

For Kappa 1.4 MPI petrol units (for Europe):

ACEA - A5 or higher;
according to SAE 5W-30;

For Kappa 1.4 MPI petrol units (except Europe):

in accordance with ILSAC - GF-4;
according to API classification - SM.
according to ACEA - A5 or higher;
according to SAE 5W-20.

In gasoline car engines Gamma 1.6 MPI (for Europe):

according to ACEA - A5 or higher;
according to SAE 5W-30.
In gasoline car engines Gamma 1.6 MPI (except Europe):
according to ILSAC standards - GF-4;
according to API - SM;
ACEA standard - A5 or higher;
according to SAE 5W-20.

For gasoline powertrains Gamma 1,6 GDI:

according to ACEA standard - A5 or higher;
according to the SAE 5W-30 specification.

For gasoline engines Gamma 1.6 T-GDI (for Europe):

in accordance with ACEA - A5;
according to SAE 5W-30.

For gasoline engines Gamma 1.6 T-GDI (except Europe):

in accordance with ACEA - A5;
according to SAE 5W-40.

Engines U II 1.4 WGT and U II 1.6 VGT, powered by diesel engines without DPF particulate filter:

in accordance with ACEA - B4;
according to SAE 5W-30.

Diesel engines U II 1.4 WGT and U II 1.6 VGT, equipped with a DPF particulate filter:

in accordance with ACEA - C2;
according to SAE 0W-30.

If there is no oil marked SM, ILSAC GF-4, ACEAA5 for gasoline engines, then it is allowed to pour SL, ILSAC GF-3, ACEA A3.

Gasoline car engines:

HELIX ULTRA AH-E 5W-30;
HELIX ULTRA 5W-40.

Diesel power units:

HELIX ULTRA AP 5W-30.

When choosing a lubricant, take into account temperature regime in which the car will be operated. Select the recommended viscosity index values from table 2.

Kia Ceed SW ED FL 2010-2012 model years

According to the instructions for 1.4L motors; 1.6L; 2.0L, running on gasoline, you need to use lubricants that meet the parameters:

For Europe:

according to API classification - SL or SM;
according to ACEA - A3 or higher class motor oil, approved for use
SHELL Helix Plus 5W-30 or 5W-40;
SHELL Helix Ultra 0W-40; 5W-30; 5W-40;
Exxonmobil SHC Formula MB 5W-30.

Except for European countries:

in accordance with API - SM, if the specified car oil is absent, then it is permissible to apply SL;
according to ILSAC - GF-4 or higher.

Based on the instructions, for 1.6L and 2.0L engines powered by diesel fuel, it is recommended:

With DPF particulate filter:

for ACEA - C3;

With no DPF particulate filter:

according to API classification - СН-4 or higher;
according to the ACEA - B4 standard.

When choosing a lubricant, pay attention to the temperature regime in which the car will be operated. Select the recommended viscosity index values from table 1.

Conclusion

Engine oil parameters affect vehicle fuel consumption and vehicle operation in cold weather (starting the engine, pumping lubricant). Using the recommended engine oil for the Kia cee'd will improve engine performance and increase the ego's operating life. The use of even an original car oil that does not meet the recommendations of the manufacturer Kia ceed will lead to deterioration of the lubrication of the engine and its premature failure.

What kind of oil to fill in kia seed will acquaint you with the article with the manufacturer's recommendations and useful tips... To service the vehicle
before carrying out routine maintenance, owners often wonder about what kind of oil to fill in the engine and gearbox gear kia ceed.

The answer is obvious, and is indicated in the service book. Some owners service book either absent, or people want to switch to another lubricant that can provide stable performance characteristics and protection of the power unit.

Before buying, you need to make sure in advance that the selected oil is suitable for the specified purposes.

Kia ceed oil in the engine

Before filling the engine with new oil, read technical characteristics, features of labeling, brands-manufacturers and other features of the product.

The first characteristic is the viscosity grade. This indicator directly affects the fluidity of the oil under different temperature conditions. The viscosity class also greatly affects the fuel consumption in winter period, which greatly affects the start of the power unit and the warm-up time.

If you plan to operate the car in winter, pay attention to products where the viscosity level is lowered. As a result, the car becomes economical, and the lapped surfaces last longer. If the environment is hot, select an engine oil with a higher viscosity grade.

Modern engine oils passenger cars, including the Kia Ceed, are designated SAE classification... It is indicated on the canister label, as it acts as the main marking. Includes two numbers, each of which is separated by a "-" sign and the letter "W".

The first number indicates the minimum temperature at which the oil is able to circulate through the channels and guarantee full cranking of the engine parts during the start-up process. The second number gives the buyer an idea of what the viscosity becomes as the engine heats up to operating temperature.

According to the manufacturer's requirements, Kia cars Ceed is recommended to fill in oil with a viscosity of 5W-40 or 5W-30. Thanks to these parameters, the power unit operates smoothly in an increased temperature range. The minimum is minus 30 ° С, the maximum is 50 ° С. Such markings are recommended to be poured into European cars, regardless of engine size, type, absence or presence of a supercharger in the structure.

Kia Ceed JD engine oil

Selection of oil in the engine according to online catalogs of manufacturers for kia ceed jd

	ACEA	API	Pour point	Flash point, ° C	Viscosity index	Density at 15 ° С, g / ml	Viscosity, cSt (ASTM D445) at 40 ºC	Viscosity, cSt (ASTM D445) at 100 ºC
Castrol EDGE 0W-40	A3 / B4	SN / CF	-60	211	168	0.8416	79	13.1
Castrol EDGE 0W-30	A1 / B1, A5 / B5	SL / CF	-45	206	180	0.8422	52	9.9
Mobil 1 x1 5W-30	A1 / B1	SN / SM	-42	230	172	0.855	61.7	11
Mobil Super 3000 X1 Formula FE 5W-30	A5 / B5	SL	-39	192		0.85	53	9.8
TOTAL QUARTZ 9000 ENERGY HKS G-310 5W-30	A5	SM	-35	200	150		65.2	11.5
TOTAL QUARTZ 9000 5W-40	A3 / B4	SN / CF	-39	230	172	0.855	90	14.7
TOTAL QUARTZ 9000 ENERGY 5W-40	A3 / B4	SN / CF	-45	230	172		89.7	14.7
Shell Helix Ultra 0W-40	A3 / B3, A3 / B4	SN / CF	-42	241	185	0.844	75.2	13.5
Shell Helix Ultra 5W-40	A3 / B3, A3 / B4	SN / CF	-45	242	168	0.840	79.1	13.1
ZIC TOP 5W-30	C3	SN / CF	-45	228	168	0.85	60.3	11.6
ZIC X9 FE 5W-30	A1 / B1, A5 / B5	SL / CF	-42.5	226	170	0.85	53.4	9.7

Kia Sid engine oil tolerances

The manufacturer specifies the engine oil tolerances as follows:
Gas engine:

API SL or SM
ACEA A5

Diesel engine:

ACEA C2 or C3 - for engines with DPF filter
ACEA B4 - for engines without DPF filter

In case of Kia cars For the first generation LED, use oil with parameters 5W-30 or 5W-40 (for operation in Europe). In addition to European countries, you can also use engine oil, the range of which is from -6 to +50 degrees. An alternative option is products with parameters 15W-40. Compared to other varieties, in this case, the minimum operating temperature is increased to -15 degrees.

Kia ceed how much oil is in the engine

For gasoline power units with a volume of 1.4 and 1.6 liters, it is necessary to fill in 3600 ml of engine oil, complete replacement will be about 4 liters. Before starting the replacement procedure, it is recommended to pour it into a separate container with a measuring scale, if it is not convenient to use the measurements on the canister.

In case of gasoline engine with a volume of 1.6 liters and the presence of a turbine, the volume of engine oil is 4.5 liters.

For diesel engines the volume is 5.3 liters, and the complete replacement is about 5.7 liters.

When carrying out a scheduled replacement, from 3.6 to 5.3 liters of lubricant is used, depending on the type of engine, volume and presence of a turbine. The year of manufacture also affects the amount of oil. If, for example, the vehicle belongs to lineup 2010 and 2011, there are no structural differences in the engine, so the volume of oil remains the same. In the case of 2008, more oil is poured, because at that time the manufacturer produced more capacious power units. The exact parameters, depending on the volume, are indicated above.

Oil in automatic transmission Kia Sid

Pay attention to the gearbox when servicing. Pour oil into the automatic transmission Kia Sid according to technical regulations... The oil is changed every 60,000 km. If the car was bought second-hand and do not know when the last service was carried out, for personal confidence, you should immediately go to the service center. The residual oil level will be checked there. Practice shows that when receiving such a machine, craftsmen fill in new material.

Verification includes analysis technical condition rubbing parts. In the presence of a four-stage box, which was installed until 2012, it is poured Hyundai fluid SP-III. If it is not available, use the alternative options with parameters: SP-III.

Filling in oils of other varieties is highly discouraged. Otherwise, it will lead to unstable operation of the "machine".
In the case of a six-speed automatic transmission installed on cars in 2012, 2013, and so on, applies Hyundai oil SP-IV or other Alternative option marked SP-IV.

Oil, automatic transmission kia ceed jd

The table below shows a selection of common oils that are suitable for the parameter automatic transmission kia ceed jd.

Selection of oil in automatic transmission according to online catalogs of manufacturers for Kia LED

Castrol Transmax DEXRON-VI MERCON LV	TOTAL FLUIDMATIC MV LV	Shell Spirax S6 ATF X	ZIC ATF SP 4
JASO 1A (03), JASO 1A LV (13)	JASO Class 1A, M315	JASO 1-A-LV
Hyundai / Kia SP III, SP IV	Hyundai / Kia NWS-9638 T-5, P / N 040000C90SG, SP-IV / SPH-IV	Hyundai / Kia except 8-speed transmissions SPH-IV RR	Hyundai-KIA ATF SP-IV
Toyota T, T II, T III, T IV, WS	Toyota / Lexus / Scion Type WS (JWS 3324)	Toyota / Lexus
Nissan Matic D, J, S	Nissan Matic S	Nissan Matic S
Mitsubishi SP II, IIM, III, PA, J3, SP IV	Mitsubishi ATF-J3	Mitsubishi
Mazda ATF M-III, M-V, JWS 3317, FZ	Mazda fz	Mazda
Subaru F6, Red 1		Subaru
Daihatsu AMMIX ATF D-III Multi, D3-SP
Suzuki AT Oil 5D06, 2384K, JWS 3314, JWS 3317		Suzuki
Isuzu (where Toyota T-IV is required)
Aisin Transmissions requiring JWS 3309	Aisin Warner AW-1
Honda / Acura DW 1 / Z 1	Honda / Acura DW-1	Honda
	Bentley P / N PY112995PA
	BMW / MINI P / N 83 22 0 142 516, 83 22 0 397 114/163 514, 83 22 2152426
	Mercedes / Daimler MB-Approval 236.12 / 14/41
	Ford / Lincoln / Mercury XT-10-QLV, XT-6-QSP or -DSP

Useful Tips
When choosing engine oil from popular manufacturers, make sure the originality of the products. The purchase should be made at certified points of sale - branded service centers, Gas station and official dealers... It is worth spending 5 minutes of time studying the packaging, checking for mandatory markings and labels. If in doubt, check with the seller who has made the purchase and who is the supplier of the oil.
At the right choice engine oil, the service life of the power unit increases. The situation is similar with the gearbox.