deutsche mark Audi has been leading its history since 1910. The founder of the company was August Horch, due to some legal subtleties, the owner could not use his last name to name the concern, and he called it Audi, this word means “I hear” in Latin. The famous logo, which features four rings, appeared in 1932. In 1965, Audi was bought by the Volkswagen concern, since then for more than half a century this brand has been owned by the VAG group.
Audi Model A6 has been in production for over 20 years. This german car replaced the popular Audi 100 at the end of the 20th century. Front- and all-wheel drive sedans and station wagons are equipped with both gasoline and diesel engines. At different times, a large number of engine modifications were installed with a volume of 1.8 to 4.2 liters. There are several products in the Liqui Moly oil lines that are suitable for most versions of the Audi A6 of different generations.

HC-synthetic motor oil Top Tec 4100 5W-40

HC synthetic low ash engine oil for gasoline and diesel engines cars. Complies with environmental standards EURO 4 and above. VW manufacturer approval: 502 00/505 00/505 01.
Top Tec 4100 5W-40 engine oil produced according to the latest technologies synthesis and are distinguished by the highest protective properties. The oil contains a special additive package with a reduced content of sulfur, phosphorus and chlorine compounds, which ensures compatibility with specific aftertreatment systems and ensures minimal emissions of harmful substances. Top Tec 4100 5W-40 reduces emissions, compatible with latest systems neutralization exhaust gases, provides fast oil flow to rubbing parts at low temperatures and high engine protection against wear.

HC-synthetic motor oil Top Tec 4200 5W-30

Recommended for gasoline and diesel engines of the Audi A6 manufactured after June 2006. HC-synthetic low-ash engine oil for passenger car engines equipped with a dual exhaust gas aftertreatment system, including DPF. Complies with environmental standards EURO 4 and above. Top Tec 4200 5W-30 is VW approved: 504 00/507 00 and meets VW requirements: 500 00/501 01/502 00/503 00/503 01/505 00/505 01/506 00/506 01 (Ausnahme R5 and V10 TDI-Motoren vor 6/2006).
Top Tec 4200 5W-30 is produced using the latest synthesis technologies and has the highest protective properties. The oil contains a special additive package with a reduced content of sulfur, phosphorus and chlorine compounds, which ensures compatibility with specific aftertreatment systems and ensures minimal emissions of harmful substances. The oil ensures engine cleanliness, optimal pressure at any engine speed, reliable lubrication at low and high temperatures, and also reduces fuel consumption and harmful exhaust components.
Top Tec 4200 5W-30 is recommended for diesel engines equipped with particulate filters and turbos.
The use of Top Tec 4200 engine oil makes it possible to ensure high reliability of engine operation and increase the service life of modern expensive diesel exhaust catalytic converters and particulate filters.

Synthoil Longtime Plus Synthetic Motor Oil 0W-30

Special product for VW vehicles with R5 TDI and V10 TDI engines built before 06.2006.
It is a 100% PAO-synthetic multigrade oil specially developed for the specific requirements of the Volkswagen Group. Suitable for use in gasoline and diesel vehicles with and without turbocharging. Significantly reduces fuel consumption and at the same time increases engine life. Has a VW approval: 503 00/506 00/506 01.
The combination of a synthetic base and advanced additive technology ensures low oil viscosity at low temperatures, high oil film reliability, and also prevents the formation of deposits in the engine, reduces friction and protects against wear.
Synthoil Longtime Plus 0W-30 engine oil is officially approved by VAG, so its use allows you to keep all warranty conditions when passing the MOT of the respective vehicles.

Without lubricants, the friction forces that occur between the rubbing elements of the motor would be much greater, the parts would heat up faster, as a result of which jamming would occur power unit. The use of lubricant contributes to the formation of a protective film on the internal elements of the engine, protects it from premature wear. We suggest that you familiarize yourself with the parameters of the recommended engine oil for the Audi A6.

Model 1993 release.

Gasoline motors

According to the operating instructions for an Audi A6 car, it is recommended to fill in motor lubricants with a viscosity of SAE 10W-30 or 15W-50 that meet the approvals of VW500 00 or VW501 01 (Duckhams Q) or (Premium Petrol Engine Oil or Duckhams Hypergrade Petrol Engine Oil).

The amount of engine oil required when replacing, taking into account oil filter is:

• 3.0 l for 4-cylinder engines;
• 4.5 liters for 5-cylinder engines.

Replacement frequency motor fluid is 15 thousand km. At the same time, the manufacturer recommends changing the lubricant more often (at least 2 times a year). The need to change the oil is indicated by the “OEL” symbol on the display of the Audi A6 car.

Diesel power units

Based on the manual for the car, you need to apply lubricants with a viscosity of SAE 10W-30 or 15W-50, meeting the approvals of VW500 00 or VW505 00 (Duckhams Q) or (Premium Diesel Engine Oil or Duckhams Hypergrade Diesel Engine Oil).

The amount of lubricant required when replacing, taking into account the oil filter, is:

• 3.5 liters for 4-cylinder engines;
• 5.0 l for 5-cylinder auto engines.

It is recommended to change the lubricant every 15 thousand. For machines equipped with AAS engines, the oil and filter are changed every 7.5 thousand kilometers. The manufacturer indicated that it is allowed to change the engine fluid more frequently - this will increase the life of the power unit and the lubrication system. The need to change the lubricant is indicated by the inscription "OEL" on the display of the Audi A6.

Audi A6 C5 1997-2005 release

Model 1998 release.

For their car models, VW / AUDI has established standards for lubricants. These standards are indicated on the container with oil, for the manufacturer of the Audi A6 it is important to use original engine oils that meet the requirements of VW.

AUDI A6 has been using the LongLife Service system since model year 2000, the distinguishing letter of the model year is Y and the chassis number is 4BYN 002 888. used in vehicles with engines up to model year 2000.

Notes on VW/AUDI engine oil standards:

1. Date of manufacture must be no earlier than 10/91.
2. When it is necessary to change the engine lubricant on LongLife machines, if the recommended lubricant is not available, fluids that meet the API oil class SF or SG can be used. For diesel vehicles, there are alternative motor oils for fluids that meet the type of CD oil according to API standards.
3. If the LongLife service car oil was not used on the LongLife service car, then when changing the engine fluid, you need to reprogram the Service indicator.
4. If LongLife grease is not available, it is allowed to fill up to 0.5 liters. motor oils VW / AUDI 505 00 or 505 01 in diesel engines, and for gasoline power units use VW / AUDI 502 00.

Please note: motor oils that the manufacturer manufactures for diesel engines with the designation CD must not be poured into gasoline engines. For both types of engines, engine oils marked SG / CD are suitable.

Gasoline engines

1. For cars up to and including 1999, it is necessary to use motor oils 500 00, 501 01, 502 00.
2. In the case of cars from 2000 with LongLife Service, having a manufacturing letter Y, use motor oils 503 00 with 154 kW or 503 01.

The selection of the viscosity characteristics of the lubricant is carried out according to scheme 1.

The amount of lubricant required when replacing is:

• 4.0 l if engines AJP / ARH / ADR / AQE 1.8;
• 3.7 l for AEB / APU / ANB / AWT 1.8T engines;
• 4.2 liters for ALT 2.0 engines;
• 6.0 l if auto engines AGA / ALF / APS / ARJ / BDV 2.4;
• 6.9 l in case of AJK/ARE 2.7 T qu engines;
• 6.5 liters if the engine is ACK / ALG / APR / AQD / ASN 2.8;
• 7.5 liters for ARS/ASG/AQJ/ANK engines.

Diesel engines

For Audi A6 running on diesel fuel, the manufacturer recommends using the following oils:

1. For cars up to and including 1999, motor oils 505 00, 505 01 are used.
2. In the case of vehicles from model year 2000 with LongLife Service, with a manufacturing letter Y, 506 00 greases are used.
3. For machines equipped with a 115/130 HP nozzle/pump engine. (85/96 kW) use grease 506 01.

Viscosity is selected according to scheme 1.

The volume of engine oil required when replacing is equal to:

• 3.5 l for 1.9 TDI AFN/AVG/AJM/AWX/AVF engines
• 6.0 L if the engines are 2.5 TDI AFB/AKN/AYM/BCZ or 2.5 TDI qu AKE/BDA.

Scheme 1. The dependence of the viscosity of the car oil on the temperature of the region in which the car will be used.

The decoding of scheme 2 is as follows:

1. For gasoline engines it is allowed to use:

• A - all-weather oils with increased anti-friction properties, corresponding to VW 500 00 or 502 00.
• B - all-weather motor oils corresponding to VW 501 01, as well as SF or SG according to the API system.

1. For turbo diesel engines:

• B - all-weather lubricants that meet VW 505 00.

The manufacturer indicates that it is preferable to fill in all-season motor oils. Their advantage lies in the absence of buying different types of oils for summer and winter. According to scheme 1, for example, at temperatures from -10 0 C to +40 0 C (or more) for turbodiesel power units, it is necessary to use motor oils 15W-40, 15W-50 or 20W-40, 20W-50. At continuous outdoor temperatures below -20 0 C, it is recommended to use lubricants with a viscosity index of 5W-20.

Audi A6 C6 2004-2011 release

Model 2011

Petrol engines

For Audi A6 models with LongLife Service maintenance, the use of LongLife motor oils is a prerequisite. It is allowed to use VW 503 00, 503 01, 504 00 motor oils. emergency situations, when the engine oil level has dropped below the “minimum” mark and it is not possible to purchase the oil recommended by the manufacturer, it is allowed to add no more than 0.5 liters of alternative lubricant corresponding to VW 501 01, 502 00, 504 00, 505 01.

For vehicles that are not covered by the LongLife Service, VW 501 01, 502 00, 504 00, 505 01 motor oils can be used. The frequency of a scheduled motor oil change is 1 year or 15 thousand kilometers. In emergency situations, when it is not possible to top up the car oil recommended by the manufacturer, it is allowed to use lubricants that meet the ACEA oil class A2 or A3.

The amount of lubricant required when replacing, taking into account the oil filter, is:

• approximately 4.5 liters if a 4-cylinder engine (125 kW), front-wheel drive;
• approximately 6.5 liters for a 6-cylinder auto engine (130 kW), front or all-wheel drive;
• about 6.3 liters for a 6-cylinder engine (160 kW), front or all-wheel drive;
• about 6.5 liters, if the 6-cylinder engine (188 kW), front or all-wheel drive;
• approx. 8.8 liters for 8-cylinder auto engine (246 kW), all-wheel drive.

Diesel car engines

For Audi A6 cars equipped with a soot afterburner filter, it is recommended to fill in only VW 507 00 engine oils, they correspond to LongLife Service and frequency Maintenance. It is unacceptable to mix LongLife motor oils with other motor lubricants. In emergency situations, when LongLife oils are not available for topping up, it is allowed to top up VW 506 00, 506 01, 505 00, 505 01 motor oils in small quantities.

LongLife Service has developed lubricants that contribute to longer maintenance intervals. As part of the LongLife Service, it is recommended to use VW 506 00, 506 01, 507 00 lubricants.

For machines without LongLife Service, lubricants 505 00, 505 01, 507 00 must be used. In emergency situations, when the specified oil is not available, it is permissible to add about 0.5 liters of motor oil corresponding to the ACEA B3 or B4 specification once. The frequency of maintenance of such cars is 1 year or 15 thousand kilometers.

The volume of oil required when replacing, taking into account the oil filter, is equal to:

• approximately 3.8 liters if 4-cylinder engine (100 kW or 103 kW), front-wheel drive;
• approximately 8.2 liters if 6-cylinder engine (120 kW or 132 kW), front-wheel drive or four-wheel drive;
• about 8.2 liters for a 6-cylinder auto engine (155 kW or 165 kW), all-wheel drive.

Audi A6 C7 since 2010

Model 2015 release.

Motors running on gasoline

According to the manual, it is recommended to fill in motor oils that meet the requirements of VW 502 00 or 504 00. In emergency situations, when you need to top up lubricating fluid, and there is no recommended lubricant, it is permissible to fill in about 0.5 liters of ACEA A3 or API SM motor oil with a viscosity grade of SAE 0W-30, SAE 5W-30 or SAE 5W-40 once, depending on the climatic conditions outside the car.

The volume of engine fluid required for replacement is:

• 4.7 liters for 2.0 L TFSI 252 hp engines;
• 6.8 liters if the engine is 3.0 L TFSI 333 hp
• 8.7 liters in the case of 4.0 L TFSI 450 hp engines.

Diesel car engines

From the vehicle operating instructions, it is recommended to use oils that meet the requirements of VW 507 00. In exceptional cases, a one-time top-up (not more than 0.5 liters) of ACEAC 3 or API CF lubricant with a viscosity grade of SAE 0W-30 or SAE 5W-30 is allowed in depending on the temperature of the region in which the machine will be operated.

The volume of engine fluid required for replacement in 3.0 L TDI 240 hp engines is 6.4 liters.

Conclusion

The recommended engine oil for the Audi A6 must meet the requirements of VW/AUDI. If it is necessary to top up the oil urgently, it is allowed to fill in no more than 0.5 liters of alternative lubricant that meets the parameters specified in the car manual. The manufacturer pours into new cars motor lubricant which can be used throughout the year. For most Audi A6 models, it is recommended to pour synthetic lubricants, as they have a larger operating temperature range than semi-synthetics and mineral water. It is forbidden to use additional additives to engine oil.

The Audi A6 C5 is a premium luxury car produced in sedan and station wagon bodies from 1997 to 2004. It is positioned as the second generation of the A6, whose history began in 1994 (instead of the Audi 100). The car could be purchased with petrol power plants 1.8-3.0 l (125-250 hp), including those with turbocharging. They also offered diesel versions with a volume of 1.9 and 2.5 liters. The "charged" modifications of the S6 and RS6 had 335 and 444 hp engines under the hood. from. respectively. In 1999, the front-wheel drive A6 was first equipped with a CVT. Even by that time, an off-road version of the A6 appeared in the station wagon body (with the Quattro prefix). In 2001, the design and body of the car were restyled. The suspension and engine range has also been upgraded. In 2004, the next generation C6 replaced the Audi A6 C5.

Regulations for changing the oil in the internal combustion engine

Experienced motorists and experts recommend changing the oil in the Audi A6 C5 engine every 10-15 thousand km. If there is old oil in the engine, as well as a systematic refusal to replace it, you will have to face serious consequences. Let's consider some of them:

• The oil becomes obsolete, and its lubricating and protective properties become unusable, which leads to an increase in the effect of dry friction of moving parts that interact with each other. As a result, the load on the engine is increased, which in the worst case can knock. It will lead to the inevitability overhaul. The engine resource is reduced to the limit, because of which it will be necessary to raise the issue of replacing the engine or selling the car for spare parts. In less advanced cases, the owner will face increased consumption fuel and internal combustion engine overheating
• Outdated used oil removes heat much worse, engine parts overheat, heat up and melt
• Reduced corrosion protection
• Wear products and other dirt deposits accumulate in the engine, they become more and more in the oil channels, which become clogged, which leads to the inevitability of a major overhaul.

What kind of oil to fill in the Audi A6 C5 engine

• Original - 5W-30, 5W-40
• Alternative - Mobil 1 5W-30, Total Quartz Ineo Long Life 5W-30, Motul 8100 X-Cess 5W-40, Castrol Edge 5W-30, Liqui Molly.

The Audi A6 business class car appeared in 1994 as a replacement for the Audi 100 (C4). The fourth generation of the model is currently being produced. The A6 is available in sedan and station wagon versions, with front or permanent all-wheel drive. Depending on the year of manufacture, the model was equipped with gasoline atmospheric and turbocharged engines of various configurations (in-line 4- and 5-cylinder, V6, V8) with a volume of 1.8 - 4.2 liters or TDI diesel engines with 1.9 - 3.0 liters. For cars sports modifications S6 and RS6 were equipped with V8 and V10 engines with power up to 579 hp.

What kind of oil to fill in the Audi A6 engine depends on its modification and the age of the car.

TOTAL QUARTZ 9000 5W40

TOTAL QUARTZ 9000 5W40 multipurpose oil meeting ACEA A3/B4 and API SN/CF quality standards is recommended by Total as engine oil for Audi A6 with petrol and diesel engines(without aftertreatment particulate filter), which require approvals VW 502.00/505.00. It is based on synthetic technology and guarantees a high degree of engine protection against wear and harmful deposits in severe operating conditions, such as urban or sports driving, as well as easy cold starts. The thermal and oxidation stability of TOTAL QUARTZ 9000 5W40 retains its performance even after long mileage between replacements. TOTAL experts advise using this oil in the Audi A6 with TFSI engines equipped with direct injection and turbocharging.

TOTAL QUARTZ INEO LONG LIFE 5W30

When changing the oil in the Audi A6 of those modifications that require lubricants of the VW 504.00 / 507.00 standards, it is recommended to use the new generation TOTAL QUARTZ INEO LONG LIFE 5W30 engine oil. Its special formulation with reduced levels of phosphorus, sulfur and metal compounds optimizes the performance of modern exhaust aftertreatment systems, prevents clogging and extends their life, which makes it suitable for use in Audi engines A6 environmental standards Euro 5, including those equipped with a diesel particulate filter (DPF). The anti-wear and cleaning properties of TOTAL QUARTZ INEO LONG LIFE 5W30 provide reliable engine protection in all driving modes and weather conditions, and oxidation resistance allows the use of this oil in the Audi A6 with extended drain intervals (in accordance with the recommendations of the automaker).

TOTAL QUARTZ 9000 ENERGY 0W30

Synthetic technology TOTAL QUARTZ 9000 ENERGY 0W30 meets VW 502.00/505.00 standards and can be used as an engine oil for Audi A6s that require this level of performance. It protects engine parts from wear and deposits in difficult driving conditions for a long time thanks to excellent performance characteristics and exceptional antioxidant properties. Due to the increased fluidity of the oil for the Audi A6 TOTAL QUARTZ 9000 ENERGY 0W30, it guarantees cold start even at extremely low ambient temperatures (oil pour point -45 degrees).

in engine oils Castrol long life for AUDI A6 (C7) used a special set of additives. Thanks to him, the manufacturer promises to preserve all the properties of his premium (EDGE) product throughout the entire period until the next MOT. In some European countries, when filling this oil, it is allowed to increase the service interval.

What should give this oil. Firstly, this is a reduction in engine noise, secondly, better lubricating properties, and thirdly, a reduction in fuel consumption. In fact, all manufacturers add such additives, but only the largest of them can afford to test on real samples and assemble the best kit.

That is why these brands are presented in our auto parts store. Buying them, you can be sure of the reliability and correctness of the choice.

Buy original oil Audi 5W30

Lubrication reduces friction between the mating surfaces of engine parts (cylinders, piston, camshaft). In addition, the working fluid contributes fuel economy and increase the efficiency of the engine. To extend the life of the power unit, you need buy original butter Audi 5W30 and replace it regularly. Part numbers branded products - G055195M4 And G055195M2.

Lubricant change

The fact is that there are lubricating components in the technical fluid that accumulate sediments, as well as combustion and friction products. Thus, the lubricant naturally becomes contaminated during the operation of the machine. Even the most expensive and high-quality product eventually loses its original characteristics and needs to be replaced.

You need to update the fluid regularly. Pour fresh branded oil it is necessary at intervals prescribed in the vehicle's instructions and developed by German specialists, taking into account the peculiarities of the engine and operating conditions. At the same time, a new filter is installed during maintenance.

Product selection

The Audi tolerance system, developed by Volkswagen AG engineers, has the abbreviation VW 5 (XX.XX). The products comply with a certain class of standardized systems of the Association of American Automotive Engineers and the Association of European Automobile Manufacturers.

VW 504.00 engine oils are by far the most popular among specifications for Vehicle from gasoline engines. Products are recommended for cars with a standard service interval (15,000 km or 12 months) and with an extended Longlife (30,000 km or 24 months).

The approval also applies to the old VW 503.00 and VW 503.01 standards for gasoline engines. Therefore, cars of older years of manufacture can use products of the new series of approval. All products have one viscosity grade 5W30.

Specification VW 507.00 is new standard VAG, which is designed for diesel modifications with or without a particulate filter. It contains a minimum of sulfate ash, phosphorus and sulfur, therefore, the service life of the filter element is significantly extended.