THE BELL

There are those who read this news before you.
Subscribe to receive the latest articles.
Email
Name
Surname
How do you want to read The Bell
No spam

Volkswagen Polo

As is clear, the serviceability of the fuel system determines the efficiency of the auto engine, as well as the dynamic and high-speed parameters of the machine as a whole. And a gradual decrease in the fundamental technical features of a car has an impact not only on the quality of driving, but also on the occurrence of breakdowns. In this article, we will talk about how often a fuel filter replacement for a Volkswagen Polo Car should be done and how this is done.

The German manufacturer does not give precise instructions on the change interval fuel filter... Manufacturers from the Volkswagen concern assure that the fuel filter for a polo sedan car can work without fail as long as the car itself. Genuine polo fuel filter for polo sedan. When to change candles and. Specifically, Volkswagen claims that this component has a lifespan equal to that of the entire vehicle. However, domestic drivers have proved that in practice everything is different. The performance of this part is primarily affected by the quality of the refueled gasoline and various dirt entering the fuel system through it, despite all the precautions taken by the engineers of the concern.

As practice shows, it is best to replace the gasoline filter every 20-30 thousand kilometers. In Russian Skoda Rapids and Volkswagens Polo, change it to a fuel filter. Remember, such figures are given not by the manufacturer, but by domestic motorists, therefore, the replacement of the fuel cleaning element can be carried out earlier in case of clogging. If, while driving, the engine of the car begins to triple or periodically stall, then in all likelihood the service life of the filter in your car has come to an end.

New filter KL 756 for VW Polo sedan

In the early stages of component clogging, malfunctions may not be visible to an inexperienced driver, but a seasoned motorist will be able to detect a breakdown in time. As for the signs of a breakdown of an element in a Volkswagen car, they are as follows:

  1. As mentioned above, first of all, this is the uneven operation of the motor.
  2. Also, the owners of the Polo Sedan models note a drop in the "traction" (power) of the car.
  3. Another symptom is an increased gas mileage as a result of a clogged component, when compared with the standard values ​​specifically for your car model.
  4. If you cannot start, and before that your car was troilo and "sneezed", then, in all likelihood, fuel the filter has reached the extreme level of contamination.

Tools

Volkswagen Polo Sedan TO-2 replacement of fuel filter

A detailed description of how to replace yourself fuel filter on Volkswagen polo Sedan... According to service book he.

VW polo sedan / fuel filter change - Ufi 31.833.00

So, if gasoline filter your car is out of order and you decide to replace it, then you will need the following:

  • flat screwdriver;
  • Phillips screwdriver;
  • rags;
  • small container for fuel in the filter.

And, of course, you need a new fuel purifier. When to change the polo sedan fuel filter. On cars with a Renault Duster filter, a fuel filter is installed. When to change the spark plugs and fuel filter on. For this component to work stably and practically, you need to buy an original model from the manufacturer Volkswagen. When all this is prepared, you can proceed to the direct replacement.


Flat and Phillips screwdrivers

Instructions

In the Polo Sedan models, the element we need is located on the right side of the gas tank. A gasoline pressure regulator is installed in the filters for Volkswagen, so when replacing you need to buy a similar component. In Russian Skoda Rapids and Volkswagens Polo, the fuel filter is polo sedan on. You will also have to find a pit or overpass.

  1. When the car is in the pit, you need to relieve the gas pressure in fuel system... Volkswagen club polo sedan. When then-2 change the fuel filter? Filter on your floor. To do this, you need to remove the cover of the fuse box, which is located in the passenger compartment under the steering wheel.


Fuse box on Volkswagen polo

  • Having previously muffled the car, dismantle the fuse for the petrol pump (marking BS 32).
  • Next, we start the engine and, without accelerating, turn on the neutral gear until the car stalls.
  • Now we turn on the starter (without starting the car) for a few seconds so that the pressure in the system is released.
  • We take a flat screwdriver and press on the retainer of the gasoline drain hose from the element to be replaced.


    Disconnecting the tube from the fuel filter union

  • Disconnect the tube from the fuel component fitting.
  • We do the same with the inlet and outlet hoses from the fittings.
  • Then carefully remove the handbrake cable from the mount.
  • We take a Phillips screwdriver and unscrew the tightening of the clamps and fastenings of the part to be replaced.


    We loosen the tightening of the fastening clamp fuel filter

  • Next, we dismantle our filter from the mounts.
  • We bring a prepared container and drain about 100 grams of fuel from it.
  • Then we take out a new filter and pour some gasoline into it (preferably new fuel, not what is left in the old one).
  • We put the filter in the holder and assemble everything in the reverse order.
  • Do not forget that after all this you need to put the fuse in place fuel pump otherwise you will not be able to start your car.

    Remember to keep fire safety in mind when working on fuel system components. While working in the garage, you must not smoke or approach your car with an open flame. Also the filter is not recommended change in rooms where natural gas appliances are located.

    In the event that your polo sedan is operated in dusty conditions or you fill it with not very high-quality gasoline, then it is advisable to replace the fuel filter more often than every 30 thousand kilometers.

    Video "Replacing the fuel filter in the Volkswagen Polo Sedan"

    The video shows how to replace the fuel filter in a Volkswagen car Polo Sedan.

    If our material helped you or you have something to add, please leave your feedback.

    Quality work car engine possible only with effective cleaning the used fuel from contamination. By cleaning the fuel, the fuel system is in a working condition. Below we will tell you how it is produced on the Polo sedan and which cleaner is better to use for a change.

    [Hide]

    Where is the fuel filter located?

    V Volkswagen cars Polo Sedan 2011, 2012, 2013 and other years of production, the car manufacturer decided to have a filter under the bottom vehicle, behind in the area fuel tank... The cleaner can be seen directly under the right rear wheel.

    Fuel purifier installation location

    When should you change?

    Now let's consider how many kilometers after which it is necessary to change the cleaning device. According to the official technical regulations in the Volkswagen Polo sedan, the frequency of the filter element is changed every 30 thousand kilometers. This period must be observed, provided that you fill the car with good fuel. When low-quality gasoline is used, the filter device is changed every 20 thousand km. If you have to change the FF often, you need to think about choosing a different gas station.

    According to the service regulations, the replacement of the fuel filter with the Polo sedan is carried out in the event of the following malfunctions:

    • the car engine began to "triple", the driver feels vibrations during movement and parking, if the car engine is idling;
    • the "thrust" of the power unit has decreased, the car needs more time to accelerate;
    • gaps appear when the driver presses the gas pedal;
    • the motor of the machine may stall arbitrarily;
    • the engine does not start.

    User Andrey Lyubochaninov made a video showing the procedure self replacement filter device in the Volkswagen Polo sedan.

    How do I replace the fuel filter myself?

    You can remove and change the cleaning device both with your own hands and with the help of specialists at the service station. Below we will analyze how to replace the part yourself.

    Tools and materials

    Before removing and replacing the filter, prepare the following:

    1. New TF. In order for the necessary device to filter the fuel entering the fuel system with high quality, preference must be given original details... Mann cleaning devices can be used in Volkswagen Polo sedan or hatchback. The original article number is WK692. It is important that the filter is equipped with a pressure regulator.
    2. Flat tip screwdriver. It will be required to loosen and remove the clamps that fix the TF.
    3. Phillips screwdriver.
    4. Clean rags.
    5. A cut bottle or other small container. It will be needed to collect fuel residues from the cleaning device during dismantling.

    The user shlepanovan made a video that clearly demonstrates the procedure for replacing a cleaning device in a Volkswagen Polo car.

    Replacement steps

    If the repair period has come, use the instructions with a photo and a description of all the nuances of the process of replacing the fuel filter.

    The procedure for changing the fuel purifier will look like this:

    1. Drive your car into a pit garage or overpass.
    2. The replacement procedure must be carried out with no pressure in the fuel rail. To reduce it, you need to find a fuse box installed in the passenger compartment under the steering wheel. The engine must be turned off. Open the plastic cover of the fuse box and remove the device responsible for the operation of the fuel pump from the seat. In Volkswagen Polo sedan cars, this part is labeled BS 32.
    3. Start the car engine. There is no need to press the gas pedal, turn on the neutral speed. So the motor will run for a while until it stalls.
    4. When the power unit turns off, turn on the ignition for 5 seconds, no more. During this time, the pressure in the fuel system will decrease.
    5. Take a flat head screwdriver. Crawl under the bottom of your Volkswagen Polo and locate the installation site for the cleaning device. Using a screwdriver, press down on the fuel drain fitting. Disconnect the line fitting connected to the filter. Disconnect the two hoses connected to the part in the same way - the inlet and outlet lines.
    6. Disconnect the cable carefully parking brake from the retainer.
    7. Using a Phillips screwdriver, loosen the wiper fasteners and clips. If the clamps are worn out, they must be replaced after installing a new TF.
    8. Remove the cleaning device from the seat. Use a rag when removing as some fuel may escape from the filter. Take the cut bottle and, placing it under the cleaner, carefully dismantle it. About one hundred grams of fuel will be released from the filter.
    9. Install a new cleaner in the seat. Pour about 50-100 grams of fresh fuel into it (it is better not to use the one that came out of the dismantled filter). The installation procedure is carried out in reverse order. When installing, keep in mind that the arrow located on the cleaner body must be directed towards the front of the machine, as the fuel circulates through the fuel system. The lugs of the lines must be installed on the unions of the cleaning device until they snap into place. Finally, fit the safety element into place. Turn the key in the ignition and start the engine. At the first attempts, it may not start, this is due to the lack of pressure in the rail. After several attempts, the power unit will start. Make sure all connections are tight and there is no leakage.

    Dismantle the cover of the fuse box and remove the part responsible for the pump Loosen the fasteners and disconnect the lines connected to the cleaning device Dismantle the filter element and replace it, pouring some fresh fuel inside

    Issue price

    The average cost of a cleaning device for a Volkswagen Polo is about 1,000 rubles. A cheaper option can be found. The price of analogs is on average 300-600 rubles, but it all depends on the seller and the store, as well as the quality of the purchased part.

    Consequences of untimely replacement

    If the filter is completely clogged, you will not be able to start the engine of your car.

    Other possible consequences untimely replacement fuel filter:

    1. The car owner will face the problem of a clogged power system. Poor cleaning of the fuel will lead to contamination of the petrol injection nozzles.
    2. As a result, this will entail incorrect operation of the power unit and a decrease in its power. The driver will have to step on the gas more to accelerate at the usual pace, but this will not work. As a result of clogging power unit it will take longer to increase the speed of the machine. Which will lead to an increase in fuel consumption. It will not be possible to detect this problem without accurate measurement, since the difference can be insignificant and amount to 200-300 grams per 100 kilometers.

    Fuel filter- the most important component of the fuel system. It cleans the fuel from all kinds of debris. These can be metal or rust particles. In any case, if even the smallest debris gets into fuel line, the engine breaks down very quickly. The filter is a necessary part to prevent these unpleasant consequences.

    The Volkswagen Polo has a fine filter for injection systems.

    Important! The Volkswagen Polo fuel filter has a button for regulating the pressure of gasoline in the system, therefore, when replacing it, it is extremely important to install only the original part.

    Features of the fuel filter on the Volkswagen Polo

    For injection auto special fine filters are used for mobile vehicles. They are installed between the gas tank and the engine. The part is small in size, but fully performs the functions of cleaning the fuel before it enters the unit system.

    Compared to carburetor systems, injection systems are more picky about the purity of the fuel, its cleaning should be as thorough as possible. Otherwise, the nozzles may clog. Gasoline inside the engine will spray unevenly, causing the unit to malfunction.

    In the fuel system of injection cars, the pressure is very high, because the body of the filter element is made of high-strength steel. It is important not to buy cheap, low quality parts for replacement. This can lead to complete destruction of the part, and subsequently - to serious problems with the engine.

    The Volkswagen Polo filter has the following components:

    • filter element;
    • frame;
    • pressure regulation button.

    It is needed in order to bleed air from the fuel system when replacing a part.

    A clogged filter element adversely affects many factors in vehicle operation:

    • gasoline consumption;
    • dynamic performance of the vehicle.

    Filter wear

    For Volkswagen car Polo sedan it is recommended to change this part of the system every 30 thousand kilometers. During the operation of the vehicle, the cleaning system gradually clogs up. The main reason is the poor quality of the fuel. With prolonged use of a worn-out filter, the vehicle assembly can be significantly damaged. Therefore, it is important to know all the signs of such a situation. It:

    • increase in gasoline consumption;
    • uneven engine operation;
    • decrease in the power of the unit;
    • difficult starting of the motor;
    • decrease in speed characteristics.

    If you do not pay attention to all these factors, the components of the internal combustion engine will begin to wear out quickly.

    experts strongly recommend not to delay the replacement of the filter. The part is not expensive, because this stage Maintenance will not cost the car owner too much. The replacement procedure is also very simple, and even a car enthusiast who does not know much experience in car repair can cope with the work.

    To do this, it is enough to follow the simple instructions for dismantling and installing the filtering component, without missing important points for work safety. The Folzwanen-Polo filter is equipped with a pressure regulation button, which greatly simplifies its replacement.

    Where is the fuel filter on the Volkswagen Polo

    In all vehicles, this element is located between the gas tank and the fuel pump. Gasoline enters the pump from the tank along the line, while it is cleaned. Only then does the fuel enter the engine system. Thus, with worn-out cleaning elements, such an important component of the fuel system as the pump can also suffer.

    The Volkswagen Polo do is located under the underbody of the car to the right of the gas tank. It is easy to notice, the filter is equipped with a small blue button to release air from the system.

    Important! The design of the fuel system on the Volkswagen Polo sedan is very convenient for replacing the cleaning element. Of the tools, you only need a screwdriver.

    Replacing the fuel filter

    If the driver noticed that the car starts up problematic, the consumption has increased sharply, the dynamics and speed indicators have dropped, then it is worth thinking about replacing the filter. Of course, it would not hurt to remember when he changed the last time. If the border of 30 thousand km has long been left behind, it's time to go to the car market for new part... Sometimes it is cheaper to order it online.

    As already mentioned, there is no need to try to reinvent the bicycle and put a filter on the Volkswagen from another car. It simply will not fully perform its functions, and when replaced, problems with dismantling may arise.

    For repair you will need:

    • observation pit or overpass;
    • screwdriver;
    • new filter.

    Pressure relief

    Before dismantling the unusable part, depressurize the system. To do this, we perform the following actions:

    1. Remove the fuse cover. She is under the steering wheel. Find the fuel pump fuse. It has # 36.
    2. We start the engine. Let the machine work a lot for Idling... Soon it will stall due to lack of fuel. This will release the pressure.

    Before removing the filter, you will need to press the blue filter button with your finger or a screwdriver in order for the remaining air to leave the system.

    How to remove the filter

    The first stage of dismantling will be to disconnect the supply pipes from the filter itself. They are attached to the filter with quick-release couplings, so this shouldn't be a problem. Use a screwdriver to press on the special button of each connection. First, we disconnect the drain tube, it is on the right and has a blue button.

    We do the same with the rest of the pipes. In this case, a small amount of gasoline may merge: there is nothing wrong with that, the fuel remaining in the pipes has merged. Then you need to loosen the clamp that holds the filter.

    Carefully remove the filter element, being careful not to tilt it, as it may also contain fuel residues. Sometimes the parking cable interferes with removing the part. In this case, it will have to be removed from the holder.

    Installation

    After dismantling the old part, we start installing a new one in accordance with the specified plan:

    1. We bring in the pipes without confusing them. Make sure that the protrusion on the body of the part matches the recess on the bracket.
    2. When connecting the hoses, wait until the latch clicks.
    3. Do not forget to replace the fuse.
    4. We turn on the ignition, then turn it off and on again. This will allow gasoline to enter the system.

    After all the procedures, the car can be safely operated, and after 30 thousand km, the filter should be changed again to prevent engine problems.

    High-quality operation of a car engine is possible only with effective cleaning of the used fuel from contamination. By cleaning the fuel, the fuel system is in a working condition. Below we will tell you how to replace the fuel filter on the Polo sedan and which cleaner is better to use for the change.

    Where is the fuel filter located?

    In Volkswagen Polo Sedan cars of 2011, 2012, 2013 and other years of production, the car manufacturer decided to place the filter under the bottom of the vehicle, in the back in the area of ​​the fuel tank.

    The cleaner can be seen directly under the right rear wheel.

    Fuel purifier installation location

    When should you change?

    Now let's consider how many kilometers after which it is necessary to change the cleaning device. According to the official technical regulations in the Volkswagen Polo sedan, the frequency of changing the filter element is made every 30 thousand kilometers. This period must be observed, provided that you fill the car with good fuel. When low-quality gasoline is used, the filter device is changed every 20 thousand km. If you have to change the FF often, you need to think about choosing a different gas station.

    According to the service regulations, the replacement of the fuel filter with the Polo sedan is carried out in the event of the following malfunctions:

    • the car engine began to "triple", the driver feels vibrations during movement and parking, if the car engine is idling;
    • the "thrust" of the power unit has decreased, the car needs more time to accelerate;
    • gaps appear when the driver presses the gas pedal;
    • the motor of the machine may stall arbitrarily;
    • the engine does not start.

    User Andrey Lyubochaninov made a video showing the procedure for self-replacement of the filter device in the Volkswagen Polo sedan.

    How do I replace the fuel filter myself?

    You can remove and change the cleaning device both with your own hands and with the help of specialists at the service station. Below we will analyze how to replace the part yourself.

    Tools and materials

    Before removing and replacing the filter, prepare the following:

    1. New TF. In order for the necessary device to filter the fuel entering the fuel system with high quality, it is necessary to give preference to the original parts. Mann cleaning devices can be used in Volkswagen Polo sedan or hatchback. The original article number is WK692. It is important that the filter is equipped with a pressure regulator.
    2. Flat tip screwdriver. It will be required to loosen and remove the clamps that fix the TF.
    3. Phillips screwdriver.
    4. Clean rags.
    5. A cut bottle or other small container. It will be needed to collect fuel residues from the cleaning device during dismantling.

    The user shlepanovan made a video that clearly demonstrates the procedure for replacing a cleaning device in a Volkswagen Polo car.

    Replacement steps

    If the repair period has come, use the instructions with a photo and a description of all the nuances of the process of replacing the fuel filter.

    The procedure for changing the fuel purifier will look like this:

    1. Drive your car into a pit garage or overpass.
    2. The replacement procedure must be carried out with no pressure in the fuel rail. To reduce it, you need to find a fuse box installed in the passenger compartment under the steering wheel. The engine must be turned off. Open the plastic cover of the fuse box and remove the device responsible for the operation of the fuel pump from the seat. In Volkswagen Polo sedan cars, this part is labeled BS 32.
    3. Start the car engine. There is no need to press the gas pedal, turn on the neutral speed. So the motor will run for a while until it stalls.
    4. When the power unit turns off, turn on the ignition for 5 seconds, no more. During this time, the pressure in the fuel system will decrease.
    5. Take a flat head screwdriver. Crawl under the bottom of your Volkswagen Polo and locate the installation site for the cleaning device. Using a screwdriver, press down on the fuel drain fitting. Disconnect the line fitting connected to the filter. Disconnect the two hoses connected to the part in the same way - the inlet and outlet lines.
    6. Carefully disconnect the parking brake cable from the retainer.
    7. Using a Phillips screwdriver, loosen the wiper fasteners and clips. If the clamps are worn out, they must be replaced after installing a new TF.
    8. Remove the cleaning device from the seat. Use a rag when removing as some fuel may escape from the filter. Take the cut bottle and, placing it under the cleaner, carefully dismantle it. About one hundred grams of fuel will be released from the filter.
    9. Install a new cleaner in the seat. Pour about 50-100 grams of fresh fuel into it (it is better not to use the one that came out of the dismantled filter). The installation procedure is carried out in reverse order. When installing, keep in mind that the arrow located on the cleaner body must be directed towards the front of the machine, as the fuel circulates through the fuel system. The lugs of the lines must be installed on the unions of the cleaning device until they snap into place. Finally, fit the safety element into place. Turn the key in the ignition and start the engine. At the first attempts, it may not start, this is due to the lack of pressure in the rail. After several attempts, the power unit will start. Make sure all connections are tight and there is no leakage.

    Issue price

    The average cost of a cleaning device for a Volkswagen Polo is about 1,000 rubles. A cheaper option can be found. The price of analogs is on average 300-600 rubles, but it all depends on the seller and the store, as well as the quality of the purchased part.

    Consequences of untimely replacement

    If the filter is completely clogged, you will not be able to start the engine of your car.

    Other possible consequences of untimely replacement of the fuel filter:

    1. The car owner will face the problem of a clogged power system. Poor cleaning of the fuel will lead to contamination of the petrol injection nozzles.
    2. As a result, this will entail incorrect operation of the power unit and a decrease in its power. The driver will have to step on the gas more to accelerate at the usual pace, but this will not work. As a result of the blockage, it will take longer for the power unit to increase the speed of the machine. Which will lead to an increase in fuel consumption. It will not be possible to detect this problem without accurate measurement, since the difference can be insignificant and amount to 200-300 grams per 100 kilometers.

    User Alexander Maslennikov filmed and published a video, which shows in detail the procedure for changing the fuel cleaning device, indicating all the nuances and features.

    Watch an interesting video on this topic

    When to change the Polo Sedan fuel filter

    According to the service book, the fuel filter is replaced every 60,000 km... However, application is not enough quality gasoline and low-quality additives, refueling with leaded gasoline, the use affects the mileage of replacement of TF.

    In severe operating conditions of a car, it is recommended to replace the fuel filter after 30,000 km.

    In addition to routine maintenance, it may be necessary to replace the fuel filter when the hum of the fuel pump appears. This is a clear signal that a breakdown has occurred in the system.

    If you do not have the skills to carry out repairs to perform this procedure and you are not confident in your abilities, then it is better to contact a service station.

    Tools and materials for replacing the fuel filter

    For a successful and quick replacement of the VW Polo TP, you must purchase everything in advance necessary tools and materials.

    What kind of Polo Sedan fuel filter to install - it is recommended to use an original fuel filter with a VAG 6Q0201051J pressure regulator at a price of 1140 rubles. It is allowed to use analogs such as: MANN-FILTER WK692, Ufi 3183300, BIG Filter GB3229, Filtron PP8364, Bosch F026403006.

    The price for suitable analogs of the filter will be 300-500 rubles lower, depending on the manufacturer.

    Since the fuel filter is located under the car, for a successful completion of the work, this procedure is recommended to be carried out on an inspection pit, overpass or lift.

    From the tool will need:

    • Phillips screwdriver;
    • clean rags;
    • container for draining gasoline from the filter.

    Instructions for replacing the fuel filter on the Polo Sedan

    1. First you need to lower the fuel pressure in the system. Disconnect the battery.
    2. Removing the cover mounting block in the cabin.
    3. We remove the BS32 fuse of the fuel pump. In this case, the ignition must be turned off.
    4. We connect the battery. We start the engine. We let him work until he stops.
    5. After the pressure was released. We get down under the car. The fuel filter is located on the right side under the gas tank.
    6. Disconnect the three fuel line tip retainers and disconnect the fuel filter.
    7. Using a Phillips screwdriver, unscrew the bolt securing the fuel filter clamp and remove the filter.
    8. The filter is installed in the reverse order of removal.

    THE BELL

    There are those who read this news before you.
    Subscribe to receive the latest articles.
    Email
    Name
    Surname
    How do you want to read The Bell
    No spam