Is a kind of quality and reliability standard in the automotive industry. It is believed that the transport from the German manufacturer is the easiest to maintain, and its performance characteristics differ in duration. Despite such a leading quality position of transport, cars from a German manufacturer can also fail. This is especially true of transmission units and mechanisms, which, without timely and proper maintenance, can reduce the performance of transport. In this article, we will talk about the Volkswagen Polo car, tell you whether you need an oil change in the Polo Sedan manual transmission, when and how to change the used lubricant, and how to do it yourself at home.
When should you change?
Many owners of "Volkswagen Polo" have a question whether it is worth changing the oil in the manual transmission, since the user manual for the vehicle says that the lubricant in the box is designed for the entire service life of the car. Indeed, in a gearbox of a mechanical type, oil is not consumed if there are no structural defects that cause lubricant leakage. However, it should be borne in mind that the operational characteristics of units and assemblies of machines vary depending on climatic conditions, driving style and many factors that cannot be absolutely calculated by the manufacturer. In addition, the concept of "operational period" is interpreted differently in our country and abroad. In Germany, the operating period of a car rarely exceeds seven years, and in our country, a car can be driven for more than thirty years.
A manual transmission, despite the high criteria of stability and reliability, in comparison with an automatic transmission, is subject to the influence of external factors, poor-quality roads or complete off-road, significantly depends on the driving style. It is necessary to regularly check the oil level in the "Polo Sedan" box, and also pay attention to its quality. Indicators for should be the following factors:
- noises and knocks atypical for transmission units;
- Difficulty shifting gears or deterioration of vehicle handling and maneuverability.
In addition, if, when checking the lubricant level, it is found that it has acquired an unnatural shade, has impurities or bad smell, this signals the need to replace it. Specialists service centers and experienced car owners recommend at least every sixty thousand kilometers. If the car is operated in aggressive conditions, then the working units of the vehicle require more frequent maintenance, approximately every thirty thousand kilometers traveled by the car.
Which oil to choose?
The question of choosing an oil is no less difficult than the need to change it. The modern market for lubricant products for transmissions has a rich assortment, which causes significant difficulties when choosing a lubricant. Which one is better to use for filling the manual transmission of the Polo Sedan car? When choosing an oil for your car, you need to be guided, first of all, by the requirements for lubrication from the manufacturer, which are set out in the instructions for the car. The most correct option would be to buy an original oil with the article number G052512A2 from the manufacturer, however, its cost exceeds the market price of quality analogues by more than two times.
According to the vehicle regulations, the filled oil must meet the SAE viscosity criteria - 75W-80 and meet the API quality standards - GL 4 or GL 5. In this case, the oil must only be of the synthetic category. As for the lubricant manufacturer, preference should be given to certified, well-known brands, and you need to buy the product only in official car dealerships in order to avoid buying a fake.
Replacement steps
For a complete Volkswagen Polo Sedan, you will need two liters of oil, a seventeen hex wrench, a container for waste fluid, a rag and a syringe or funnel for filling fluid. If on your vehicle there is a mechanic, the oil in the gearbox should be changed according to the following regulations:
On this replacement lubricating fluid in the manual transmission "Polo Sedan" can be considered complete. After a short break-in of the car, it is necessary to check the oil level again, and also check the system for leaks.
Let's sum up
Mechanical transmissions "Volkswagen Polo" are characterized by excellent maintainability, which allows them to be serviced at home without resorting to expensive professional assistance. Following simple recommendations, even a novice car enthusiast, no experience technical works, will be able to successfully change the oil on its own. Monitor the condition of the manual transmission, regularly check the oil level and replace it if necessary, as your safety on the road directly depends on this.
The gearbox is one of the main components of the Volkswagen Polo. Reliable and long-term operation of the gearbox is only possible with the right choice transmission oil and compliance with the timing of its replacement.
According to the recommendations of experienced car owners, the oil in the Volkswagen Polo automatic box is changed after 65 - 80 thousand kilometers. Dealers recommend filling in the Volkswagen Polo sedan box original oil, the article number of which is VW ATF G055025A2. Alternative options which can be used in automatic transmissions are Castrol Spezialprodukt, SWAG 30 91 4738 or LIQUI MOLY TOP TEC ATF 1200.
The original lubricant for manual transmission is VAG G052512A2 API GL4 SAE 75W-80. In addition to branded products, Castrol Syntrans V FE 75W-80 oil shows itself well. It is possible to use products from other manufacturers. At the same time, the lubricant for the Volkswagen Polo manual transmission must correspond to the SAE viscosity - 75W-80, and also meet the API standard - GL 4 or GL 5. The oil must be made only on a synthetic basis. It is recommended to change the fluid with a mileage of 80 - 100 thousand km.
Description of the procedure for checking the oil level in an automatic transmission for Volkswagen Polo
- Warm up the box well.
- Press the brake pedal and alternately shift the lever to different positions. Then set the selector in the neutral position and release the pedal.
- Unscrew the inspection plug. At a normal level, liquid will flow out of it.
- If the grease does not flow out, it is necessary to top up it. The liquid must be poured until it flows out of the control hole.
- Tighten the oil level plug.
Description of the procedure for checking the lubricant level in a manual gearbox on a Volkswagen Polo
In order to check the lubrication level in the manual transmission, you must use the instructions below.
- Unscrew the plug using the "17" hexagon.
- Check if the liquid reaches the lower edge of the inspection hole.
- Screw on the plug.
There are gearboxes with a dipstick. In this case, the oil level should be between the Min and Max marks.
Pouring grease into an automatic gearbox for a Volkswagen Polo
To change the lubricant in an automatic transmission on a Volkswagen Polo car, the car owner will need a set of tools and materials, which are shown in the table below.
Also, the car owner must first purchase a number of consumables, which are listed below.
- Oil filter. The original product has the article number 09G325429.
- Pan gasket for automatic transmission. Its original has article number 09G321370.
- Drain plug gasket.
The required amount of lubricant that the driver needs to change the oil is 7 liters. In order to make a do-it-yourself fluid change in a Volkswagen Polo automatic box with a 1.6 engine, you must use the instructions below.
- Warm up the car engine
- Place the car in the inspection pit. If possible, the car can be lifted using a lift.
Car lifted with a lift
- In the case of using the inspection hole, fix the car with the parking brake.
- Disconnect the negative terminal.
- Remove protection.
- Unscrew the drain plug.
- When the oil drains from the automatic transmission crankcase, remove the sump.
The process of draining the old fluid in the automatic transmission
Dismantled pallet
- Using a wrench, you need to unscrew three bolts and remove the old oil filter.
Removed oil filter
- Install a new filter.
- Clean the pallet from contamination with special liquid and rags.
Cleaned pallet
- Change the pallet gasket and install it in its place.
- Clean the drain hole.
- Install a new seal on the drain plug.
- Screw the plug into the drain hole.
- Using a syringe, pour oil through the throat of the crankcase.
- Close the neck.
- Check the oil level with the oil level plug. If the level is normal, then screw the plug back into place.
- Start the engine.
- Press the pedal and move the selector to different positions. The switching time is about 10 seconds.
- Stop the engine.
- Check the fluid level in the automatic transmission. Add oil if necessary.
Changing the oil in a manual gearbox on a Volkswagen Polo
To change the oil in the manual transmission, the car owner will need a set of tools, which is shown in the table below.
Also, the driver will need 2-2.5 liters of oil. In order to replace the fluid in the manual transmission with Volkswagen car Polo car owner needs to follow the instructions below.
- Warm up the car engine.
- Place the car in the inspection pit.
- Remove protection.
- Place a container under the drain hole.
- Unscrew the drain plug with a 17 hexagon socket.
Initial moment unscrewing the drain plug with a hexagon
The process of unscrewing the drain plug after loosening it
- When unscrewing the plug, the key often rests against the surface, for this reason it is recommended to use an extension cord.
Using an extension cord when removing the drain plug
- Clean the thread of the plug after removing it.
Dismantled drain and filler plug
- Visually assess the condition of the old oil.
Waste slurry in a container
- Screw on the drain plug.
- Pour new oil into the filler neck using a syringe.
- Screw on the plug.
- Start the engine.
- Shut down the car.
- Check oil level and top up fluid if necessary.
Timely replacement transmission fluid in an automatic gearbox (automatic transmission) - an integral part Maintenance VW car.
It must be produced first of all according to technical instructions specific vehicle. However, there are some recommendations, the use of which will only improve the life of your car with automatic transmission.
Changing the lubricant, as recommended by professionals, should be depending on the mileage, which should be no more than 60-80 thousand kilometers. It is also necessary to take into account the fact that most imported cars are not focused on their operation in the harsh Russian conditions. And it is better to change the lubricant every year, even if the mileage does not exceed 60-80 thousand kilometers, during this period of time. It will be better to change the lubricant during the preparation of the car for the winter season, so that the lubricant does not thicken in frost.
The carmaker Volkswagen does not set hard deadlines for changing technical fluids in its vehicles. Including the replacement of transmission fluids by the manufacturer is not regulated. However, the ATF refresh rate depends on the mode in which you use your car, and this, in turn, affects the amount of transmission life.
The approximate mileage after which you need to change ATF to Volkswagen in Russia is about 60,000 kilometers. This is approximately how experienced motorists and some experts determine the service life of an oil in a box. In addition, it should be remembered that this range is determined by the vehicle manufacturer itself under normal operating conditions. The worse these conditions are, the more often the change will need to be made.
What are the worst conditions? For example, climate (dust, snow, frost, constant temperature changes, high humidity). It can also be overloading of the engine (for example, when delivering heavy bulky goods), which also does not support the performance of the oil. As a rule, under the worst operating conditions, experts recommend reducing the period from oil change to oil change by about 30%.
Process technology
At Volkswagen service stations, there are two ways to change the oil:
- The simplest one is oil renewal or its partial replacement.
- Complete replacement - replacement
The first method is very simple and does not require additional equipment- the old technical liquid is drained through the drain hole, and, naturally, a new one is poured through the filler hole. The advantages are that when using this method, you save a lot of effort, money and time. Disadvantages - not all of the old emulsion is drained, but only 2/3. The new oil is partially mixed with the old one.
When using the replacement method, a special apparatus is used that squeezes out the old grease under high pressure, replacing it with a new one. Advantages - complete replacement liquids. Disadvantages - with the inept use of this method, the Volkswagen automatic transmission may be damaged. Also, it is not advised to use this method on old cars with high mileage... Replacing the transmission lubricant with full replacement is possible due to the fact that the emulsion circulates inside the box. When the lubricant is completely changed, the mechanic simply opens the necessary nozzles and starts a special unit that pumps out the old grease and at the same time pumps in a new one.
After changing the oil in a Volkswagen automatic transmission, you should regularly check its level. It will not take a lot of time, at most 2-3 minutes. But it will allow you to extend the life of your beloved car. And remember, even a slight deviation from the oil level leads to increased wear of parts of the automatic transmission and its breakdown.
Tools and materials
First you need to find the right transmission fluid. It is recommended to purchase only original ATF, for example, ESSO ATF LT 71141. Do not purchase fluid from questionable sellers. Such a lubricant will not fully comply with the machine manufacturer's approvals, which will lead to a sufficiently rapid failure of the gearbox.
- New transmission oil pan gasket;
- Drain plug with gasket;
- Oil filter, automatic transmission VW;
- Capacity for draining technical fluid;
- Set of wrenches
- Rags
ATF replacement step by step
- The car is installed on an inspection pit with a muffled engine and switched off lighting equipment and other devices.
- The transmission grease must be warmed up, then it will not thicken and will drain faster.
- Removing the engine crankcase protection (if any).
- A container for draining the transmission fluid is placed under the drain plug, which is unscrewed.
- Wait about 45 minutes until the old grease is completely drained.
- Carefully loosen the pallet mounting bolts automatic transmission... Usually it may contain some more hot lubricating liquid, so safety precautions are required.
- After the pallet is removed, the dismantling of the old oil filter... It is usually held in place by three bolts (depending on the specific car model). It is possible not to change the filter if the operation is performed for the first time, but then the remnants of the old emulsion must be removed from it with a syringe.
- The dismantled pallet should be washed from the formed carbon deposits. There may be metal shavings that need to be removed as well.
- A new gasket is put on the pallet, after which it is put in place.
- The drain plug is screwed in with a fresh O-ring.
- The ATF is replaced with a syringe or flexible tube. After filling with oil, you need to let the motor run a little idle with a different position of the "automatic" selector.
Subtleties of replacing fluid for transmission
Transmission fluid, depending on the brand, may have a different color and smell. These indicators, by and large, do not affect the properties of lubricating fluids, since during operation car engine they are light brown to black in color, indicating the life of the grease.
It is usually impossible to achieve complete replacement of the used transmission fluid with fresh one, since it will inevitably mix with a small amount of working off. Therefore, even after a short time of operation, it is simply impossible to establish the type of lubricating fluid by external signs.
The statistics of the repair cases of Volkswagen "automatic machines" show that the units break down not due to the mixing of different emulsions. The operating conditions of the transmission are of paramount importance, and even the most expensive synthetics will not help if they are violated.
When changing the lubricating emulsion, the temperature of the gearbox should not exceed 45 degrees. Do not forget to set the level of the grease poured into the box. To do this, the engine and automatic transmission of the Volkswagen are warmed up again to 40 degrees, after which the gearbox selector is moved several times to all positions sequentially forward and backward with a pause of 5 seconds. Then remove the drain plug so that a small trickle of oil flows out. As soon as it stops flowing, it means that the fluid level is set correctly.
Original lubricants are usually indicated in the operating instructions for the car or on the oil dipstick. Most suitable for VW are G 052 025 (A2), Esso Type LT 71141 and G 052 182 A2.
In order to prevent the lubricating fluid from overheating, a radiator is provided in the automatic transmission design. Therefore, when changing the lubricant completely, you need to pay attention to how the hydraulic lines are laid through which the transmission emulsion flows. Incorrectly connecting the oil change unit, you can provoke the Volkswagen automatic transmission out of order.
The hydraulic fluid in the transmission not only lubricates the moving parts, but also transfers some of the torque. Therefore, its composition is different compared to that of VW manual transmission fluids.
A correctly set transmission fluid level is very important for smooth operation VW gearboxes. It is necessary to check the lubricant level at a certain temperature, established by the vehicle manual. In German boxes, a so-called inspection hole is used for this. If oil barely drips through it, then the level is normal, if it goes in a trickle, then the level is too high.
How to properly and inexpensively maintain a vehicle?
The fluid must have the required valid Volkswagen Group approvals. Most preferably, a synthetic lubricant is used. If you buy a lubricant from another company, it is advisable that this company is a manufacturer, and not just a supplier of technical fluids.
And a little about the secrets of the Author
My life is not only connected with cars, but also with repair and maintenance. But I also have a hobby like all men. My hobby is fishing.
I started a personal blog in which I share my experience. I try a lot of things, various methods and ways to increase the catch. If interested, you can read it. Nothing more, just my personal experience.
Attention, only TODAY!
In the original ETKA program, you can precisely match the original catalog number transmission oil. The last two characters indicate the volume of the canister. A2, S2 corresponds to one liter, A1 - 0.5 liters, A6 - 20 liters bucket.
The original is much more expensive than analogues.
Manual transmission oil VW
G 052 171 A2
It was poured into the MQ350 MQ500 six-speed gearbox. Replaced in 2015 with GCN 052 171 Z2 without replacement.
G 052 182 A2
Fill in DSG boxes.
G 052 512 A2
G 052 527 A2
Suitable for five-stage boxes Polo sedan, Jetta, New Beetle, Caddy, Eos, Tiguan, Touran, Passat, Transporter, Sharan. Replaced G 052 512 A2.
G 070 726 A2
Poured into
Jetta 162 five-speed manual LDZ
New Beetle 5-speed manual transmission up to 1.2007
Automatic transmission fluid VW
Volkswagen cars are equipped with five-, six-, seven-speed automatic transmissions. It would seem that the manufacturer recommends a different oil for the same type of transmission.
For an accurate selection, it is advisable to use the original catalog that decodes the VIN.
G 052 162 A2 (1l.) 20l. G 052 162 A6 (20l.)
Used in a four-speed automatic
New Beetle 1C box code FDF FDC FDB FDG FDH
Suitable for six-speed automatic transmissions
New Beetle 1C six-speed automatic GGZ GHE GHG GYS HFZ HGA HLJ
For a five-speed automatic transmission
Bora automatic transmission code EYM ELD FGA EEE
Transfer oil VW
Amarok with self-locking differential for transfer case LEP until 22/08/2010
Amarok with MTL NHY self-locking differential after 23/08/2010
Gearbox oil VW
VAG G 052 145 A1
Has API GL5 specification and 75W-90 viscosity.
Can be replaced with any quality synthetics and semisynthetics with the same characteristics.