How to store Featured tires correctly. How to process winter tires before storage

How to store car tires with or without rims

New tires in stock

Every motorist sooner or later faces the problem of storing tires. The climate in our country does not allow moving around on one type of rubber all year round, so you have to have a winter and summer set. Throwing out tires after one season is not an option. Simply folding a set of tires on the balcony is also not an option, since they are made of rubber and special additives that require special storage conditions.

The room where the wheel tires should be closed and warm. Storage temperature from 10 to 20 degrees Celsius. Also, humidity affects the service life, it should be no more than 60%. Moreover, the tires are also afraid of the sun's rays, because of them microcracks are formed.

It is very important in what position they will wait for their season. As soon as you change tires from summer to winter or vice versa, mark where the tires were. Usually they write the letters "PP" - it means front right or "ZP" - it means back right. Upon arrival of the desired one, if the wear is significantly different, it is recommended to put more good rubber.

Interesting video, be sure to watch:

Winter tire storage

It is highly discouraged to store them on the balcony or in the closet, since in these places it is impossible to isolate them from certain external influences. It is best for them to wait for their season in a garage, dry basement. Storage temperature and humidity are the same as for summer tires... If the tires are with rims, store them horizontally, otherwise a vertical one will do.

Summer tire storage

The ideal option is to store summer tires with rims. If you can't afford it, then you don't need to use discs. They will be perfectly preserved if you follow some rules. The room where the tires are stored should be free from drafts and sunlight. The air temperature is from 0 to 25 degrees Celsius, otherwise the rubber will deteriorate faster. Do not store oil, gasoline, thinner, diesel fuel and other liquids near the tires.

Storing tires without rims

Tires should be stored upright, tightly to each other. To prevent them from losing their factory shape, you need to turn them over once a month. It is not necessary to cover them with cellophane, because of this condensation forms on them, which is contraindicated for tires during storage.

Storing tires on disks

Tires on disks are much better preserved than without them. They should be prepared for storage in the same way. It happens that people are advised to deflate tires before storing, but this is not true, because this way dust and moisture will get inside them, which contribute to deformation. Store them horizontally, and to save space, you can fold one wheel on top of the other. If stored vertically, they will deform. The best option is to hang the rims with tires on a hook, so they will be preserved the best, but not everyone has this opportunity.

Tire treatment products

After removing the tires from the rims, you should clean them from dirt, stones and other debris between the tread walls, also thoroughly rinse the entire surface from the inside. To avoid tire aging, it is advisable to treat it with a special agent sold in any car dealership. You need to buy just such a protector, which is suitable for the type of your tires, otherwise, on the contrary, you will worsen their condition.

The product should protect rubber from ultraviolet radiation and provide preservation. Apply the product only to thoroughly washed, clean, dried rubber.

pro-zamenu.ru

Seasonal Tire Storage - How To Store Rubber Correctly!

When changing seasonal tires, every car enthusiast faces the question: how to save it until the next season. After all, tires are stored for about six months. According to the data that is replete with the Internet, if not properly stored by the onset of the season, you can get deformed and completely damaged rubber.

Proper storage requires adherence to certain humidity and temperature conditions. It is also necessary to store the wheels in a suspended state on round brackets and turn them regularly.

It should be admitted that this method is quite burdensome. There are, of course, a certain number of motorists who are ready to follow such recommendations and engage in such procedures on a daily basis. But, it is not always possible to find time for this. And not everyone has a place to hang the wheels.

So what is the way out of this situation? How to store tires during the off-season?

Rubber for tires is a composite material, which means that in addition to rubber and polymers, it contains various additional components. Such as carbon black, stabilizing and reinforcing materials (metal and textile cord).

Being exposed to the influence of various factors during operation, rubber ages over time and gradually loses its quality. Direct sunlight, temperature changes and moisture all accelerate its aging and wear. Tires that have lost their elasticity are practically unsuitable for use in winter period.

The most in a simple way off-season storage of tires is considered packing rubber in special cases.

For example, the Heyner tire storage covers make storing your car wheels convenient and comfortable. If you have to store wheels in a living space, then these covers will save you from the unpleasant and harmful smell of rubber:

before packing in covers, tires must be thoroughly washed and dried;
after drying, it is advisable to treat them with a special preservative, which can be purchased at a specialized store;
if possible, store each wheel in a separate bag.

Heyner tire storage covers perfectly protect rubber from sunlight and moisture. Sufficiently durable materials are used for their manufacture. Convenient fasteners will help you to easily pack the wheels, and if necessary, remove them from the covers. Special handles will help you carry the wheels to any convenient place.

Proper storage of tires is the key to their durability

Most car enthusiasts are pretty careless about storing tires. Changing summer tires to winter ones, they simply fold it in the far corner of the garage or take it out onto the balcony, where it lies then all winter. And what is their surprise when in the spring they see that completely new and practically unworn tires have fallen into disrepair. In reality, storing car tires involves doing quite simple rules... What are they all about?

When replacing tires, first of all, it is necessary to mark on which disc this or that tire was mounted. Never store them in a damp, cold room. The storage temperature should be between ten and twenty-five degrees. Naturally, it is necessary to avoid exposure to sunlight during storage. The balcony is the least suitable for this. And the conditions in the garage are far from ideal, since there is sometimes a high level of humidity in it.

But if there is nowhere else to store tires besides the garage, then for this it is necessary to prepare a special place there. To do this, each tire must be packed in a cardboard box, in which holes must be made, so that moisture does not accumulate inside.

If the tires are not removed from the disks for storage, then the most acceptable way to save them until the next season is to lay them horizontally, before that, having covered them with a layer of chalk and reducing the pressure to one and a half atmospheres. It is also necessary to ensure that no oil products (gasoline, oil and other fuels and lubricants) get on the tires during storage. One option is to store the tires on rims by hanging them in the garage.

When storing without discs, the tires can be parked vertically, but remember to turn them from time to time to change the point of contact of the tires with the floor, which will help prevent deformation of the side surfaces.

The best way Is to hand over the tires to the station Maintenance where storage of car tires is one of the services for our regular customers.

In conclusion, I would like to add that even with periodic use of the car, tires have a certain service life and it does not matter how many kilometers have been traveled. The longest tire life is no more than five years. And do not forget that good-quality tires on the car are one of the conditions for your safety on the road.

ok-sovety.ru

How to store tires correctly

In order for automobile rubber to serve more than one season, it is necessary not only to properly care for it, but also to adhere to the basic rules for storage. Not many consider it necessary to follow these rules, so they buy new tires every six months. If you do not want to spend extra time and money on buying new tires, then you need to familiarize yourself with the requirements that relate to their storage.

Online store of tires and wheels Rezina.CC offers a wide range of products for affordable prices... All products are different high quality and durability. For more information on tire products, please visit https://rezina.cc/shiny. Here are detailed descriptions, photos and customer reviews.

What you need to do with proper storage of rubber

Choosing a room. Everyone knows that ultraviolet light has a harmful effect on car tires... Therefore, they need to be stored in a closed and dark room, where the sun's rays will not fall. Do not forget about the air temperature, which should be in the range from + 1000C to + 2500C.

It is worth remembering about airing the room. The air humidity should be approximately 50-60%. Most drivers store tires in the basement. As a rule, it is there that the air humidity exceeds the permissible norm. But if it is not possible to store tires in another place, then the basement needs to be ventilated very often.

We put marks on the surface of the tires. If you need to install tires on the same wheels, mark them on their surface before removing. It is also necessary to note the direction of the tires.
We process rubber before storage. After dismantling the tires from the wheels, you need to wash them thoroughly, clean all the stones, carefully inspect the inside for small objects. After that, you need to thoroughly dry the tires. Then we process the surface of the tires with special means. They will help protect your products from premature aging. Before using the product, you must read the instructions for its correct use. Since in the opposite case, you can harm the rubber and accelerate its wear.
We choose the position of the tires. One of the most important storage rules is the correct position of the tires. If they will be stored on disks, it is best to stack them on top of each other in order to save space. You can also store the rubber on the disks in a suspended state. But in an upright position, you should not save tires.

For tires without discs, it is not recommended to hang or lay them horizontally. This rule cannot be ignored, because otherwise the grip characteristics of the tread may deteriorate. Plus the additives can speed up tire wear. To protect the rubber from deformation, it is recommended to use a semicircular base for storage. Do not forget that tires must be flipped periodically.

We do not pack tires in bags and boxes. This storage method will negatively affect the condition of the tires, as condensation may form inside the bag or box, which is very harmful to the tires.

rualavto.ru

Winter rubber storage | Diaginfo

Every season we change the summer type of rubber to winter and vice versa. For example, I've never thought about whether there are any peculiarities in the storage of winter tires, and, in general, automobile rubber. It turns out there are a number of some points worth writing about. After all, you must admit it will be offensive after half a year to see cracked or deformed rubber in front of you (this is certainly an exaggeration, but nevertheless).

What rubber is afraid of, consider the points:

Direct sunlight - microcracks are formed, rubber itself collapses, ages quickly.
High temperatures (above +25 degrees), sudden temperature changes.
High humidity, condensation, dust and dirt.

It is forbidden to store rubber outdoors !!!

In total, a clean, dry, dark room of average humidity without sudden temperature changes suits us. Now let's move on to the process of preparing rubber for storage.

We remove the rubber, clean it from dirt, sand and other things, take out the stones from the tread. If the protector is directed, we remember or note which wheel stood where. It is better to treat the rubber with a special chemical agent for its preservation for the season, it stops the aging process of rubber. It is not advisable to seal or seal the rubber with anything.

How and in what position to store tires.

It is better to store the rubber assembled with the disc, the pressure in the wheel should be slightly reduced. Thus, the inner surface does not become dusty, the wheels keep their shape.

Tires with discs assembled - stored either in a stack (no more than 4 pcs. In a stack) on a flat surface, as shown in the figure, or in a suspended state, the wheel is suspended by the disc itself.

Tires without discs are stored strictly in an upright position, periodically they must be turned a quarter of a turn so that they do not lose their round shape.

Cameras are kept in a slightly inflated state on a bracket sticking out of the wall.

We also prepare the battery for winter - choose Charger.

diaginfo.ru

Car tire storage

In this article, we will take a closer look at the issue of seasonal storage of tires - tires and wheels with rubber assemblies. At first glance, it seems that it does not matter how to store rubber. In what position and in what conditions, yes, of course, rubber is a rather plastic and resistant material, but still its operational properties may well change for the worse, if you do not follow the elementary storage rules.

This method primarily applies to those motorists who drive all year round on the same disks. That is, every off-season, that they say "change shoes", in this case, the tires are stored separately from the disks. Due to the low curb weight, tires can be stored in a pile, but not desirable. It is best to put the tires on the tread, and during the storage period, rotate the tires to change the bearing surfaces and to prevent changes in the shape of the rubber of the tire. In this case, the load on the rubber will be minimal, both in terms of force and in terms of the time of its application.

When storing tires and disks in assembly, the mass of the assembly, relative to only one tire without disks, increases significantly. This also entails a change in the way of storing tires assembled with disks. To reduce loads, on a specific area of the tread, tire rim, disks with rubber, it is necessary to store the wheel on the wheel - in a pile.

In this case, the main load will fall on the disc, in extreme cases it will be evenly distributed over the rim, which also will not entail a change in the shape of the tire during storage. In addition to the location of tires during storage, climatic storage conditions are also an important factor.

General requirements for the storage room for tires

Tire material (rubber) is influenced by the following factors that must be considered and observed to ensure proper tire storage during storage:

Temperature

Optimum temperatures for storing rubber products, including tires, are from 0 to + 25C. At temperatures above +25 ºC and below 0, rubber ages faster, this is manifested in the appearance of cracks, a decrease in the ductility of the tire material.

Humidity

It is necessary to exclude the appearance of condensation, water falling into closed cavities can be stored in them for a very long time, which entails a color change, and also affects the aging process of rubber. The relative humidity of the air during storage should be about 50 - 60%, i.e. like in a living space. The humidity in the basement is usually higher, so it should be periodically ventilated. Light

The best condition is to store the tires in a dark place. The most damaging effect is exerted by ultraviolet light, that is, first of all, it is necessary to close the tires from direct sunlight. You can additionally protect them with covers, which will protect the tires from ultraviolet radiation.

Technical fluids

Tires must be protected from all solvents, oils and greases, including short term exposure. Tires must also be protected from heat sources and welding spatter. It is best to wash and dry your tires before storing them.

Weight distribution on tires during storage

See the sections above for each specific method. Additionally: when working with displacement, tire re-beading, tires must not fall from a height of more than 1.2 meters. Such loads can damage the tire sealing beads. With prolonged static loads, changes in the shape of the tire are also possible

It is also worth mentioning small stones that can get into the tread of the tire during its operation. Before storage season, take a screwdriver and use it to remove all stones from the tire tread. Small stones can cut through the tire over time, resulting in repairs or even damage to the tire.

Additional tire care products before storage

To protect rubber from aging, there are special products on sale. The so-called automotive cosmetics - "Cleaner-conditioner" or "Cleaner-protector for tires". These preparations, according to the instructions, must be applied to the outer surface of the tires. Processing is carried out immediately before "bookmarking" for storage.

www.autosecret.net

Seasonal tires are made from different types rubber: summer - harder with a low tread, winter - soft and elastic with a deep pattern. However, both require optimal storage conditions during the off-season. Otherwise, if the requirements for the place and method of storage are not met or in the absence of preliminary processing, the risk of rubber deterioration increases significantly.

The dirt that remains on the tires (especially in the tread patterns, Velcro) contributes to the rapid aging of the rubber. In addition, small sharp objects may remain in it, which, if stored improperly, will contribute to the cracking of the material.

Too low (for summer tires) and too high (for winter) temperatures contributes to the destruction of the structure of the rubber and its further cracking. When exposed to direct sunlight, the rubber ages, shrinks, loses its elasticity and, as a result, begins to crack.

The quality of the material is negatively affected and the humidity in the storage room is too high. The structure of rubber under the influence of moisture loses its elasticity, water penetrates into the pores and undermines the binding fibers.

Any kind of heaters that dry out the air will not help, but will only aggravate the situation. Damaged tires not only complicate the driving process, but also significantly increase the risk of accidents.

Want to know for a car? Be sure to read our expert's informative article.

Interested in the question: which is better -? Follow the link and read the material of a qualified specialist.

Saving without disks

Not everyone prefers to remove tires from rims for storage, as the process is more troublesome and takes longer. It is also believed that storing tires in this way helps save space. Prepare tires before placing them in storage.

Removing tires

In the process of removing the rubber from the rim, you must make sure that the tire has not expired yet. The date of issue is indicated on the label, depending on the manufacturer's recommendations and the operating conditions of the tire, it is recommended to use it for no more than 5 years.

After removing the tire, it must be marked so that there is no confusion about which wheel belongs to. It is recommended to change the location so that the tires wear out evenly. You can mark up with paint, marker or chalk.

If the material side of the issue does not matter to you, then it is better to give it to a car service for washing and treating tires. There they will thoroughly rinse it, remove foreign objects and treat it with a preservative. Silicone lubricant is well suited for processing, which absorbs well and protects the rubber.

For information on how to choose and use correctly for a car and tires, read the material of our author.

If you decide to do this yourself, then make sure that dirt and foreign objects are completely removed, it is also necessary to remove the remains of oil and oil products. The preservative solution should be purchased from a specialist store, where they will advise you on the right product and tell you how to apply it.

Also, do not neglect the instructions, otherwise you can ruin the material. The tire (optional) is then placed in an opaque plastic bag that is not completely closed to allow air to circulate.

Storage space

In order for the tires to remain in good condition, rubber processing is not enough.

You need to find a suitable room that will meet the following conditions:

good ventilation, dryness and cleanliness;
lack of direct sunlight: it is recommended to choose a dark room that does not heat up;
optimal humidity level: humidity must be maintained at a constant average level of 55 to 65%;
optimum temperature: always take into account the seasonality of the tires and store them in accordance with the temperature range of the season. At the same time, critically low or high temperature indicators should not be allowed.

The way of storing tires is also important. Storing tires without rims is only allowed in an upright position. Rubber, folded on top of each other in a horizontal position, or suspended, is easy to deform.

How to store tires on disks

Among experienced drivers and service technicians, it is believed that the rubber on the rims retains better, due to the fact that deformation is practically eliminated.

You can find out about the pros and cons, the peculiarities of their choice and storage in the material of our specialist.

Preparatory activities

First of all, the wheels must be thoroughly rinsed and dried. Further actions depend only on the storage method. Tires can be stacked or suspended from the middle in the rim.

If you plan on storing your tires in a stack, you need to use special covers or sturdy plastic bags. You can hang the tires from the rims using ropes and brackets.

Rules for storing summer tires in winter

The best place for storage will be a dry, dark place, which will not penetrate the sun's rays. In winter, the sun is especially active, so it does more damage to the material. The conditions for the room must be observed in a frame similar to that for storing tires without rims.

Rules for storing winter tires in summer

The main requirement is compliance with the conditions for temperature and ventilation of the room. You should also take into account the peculiarity of winter tires - a deep tread pattern.

Therefore, washing and cleaning must be especially careful. The room must be clean, dry, well ventilated and cool.

When storing, you should adhere to the following rules:

tires must be dried and thoroughly cleaned of everything (including oil and oil products);
rubber should be stored at least one and a half meters away from heating appliances;
the surfaces on which the tires are located must not absorb heat;
all indicators (temperature, humidity, ozone level) must be maintained at an optimal level;
Do not store tires in open rooms, balconies and in the immediate vicinity of chemicals.

Twice a year, motorists "change" their vehicles. The tires left over from last season are sent to the garage or to the balcony. Car enthusiasts are racking their brains over how to properly store winter tires and whether tires can be stored on the balcony. This is a very important question, because if basic requirements are not met, even the most expensive tires are unlikely to live long. Below will be highlighted the main aspects of storing winter tires, which will surely help to extend their service life.

Storage of winter tires in summer - with or without discs

If everything is fine with your rubber and it is ready to serve one more season, then you need to carefully choose a room for its storage. Please note that the tires are quite massive and take up a lot of space. A dry and clean basement, storage room, brick garage are best suited. You can also send for storage to a specialized warehouse (service station, tire fitting).

The option with wooden boxes should not be considered. Such conditions are suitable only for summer tires. Winter tires heat up very quickly and become unusable if placed in a sealed box.

Here we come to the main question - how to properly store tires in the summer season. There are two options at once - without or with disks. Regardless of which option you choose, do not forget to wash and then dry your tires well, rid them of dirt, stuck stones and salt, which is sprinkled on roads in winter.

In what position to store tires without rims and with rims

Tires are stored lying or standing, depending on whether they will be with or without disks. If you leave the discs, then it is allowed to stack the wheels on top of each other. You can hang them, but at a certain distance. The last one is how to store tires without rims. Choose an upright position here. To avoid deformations, the surface must be rounded.

Is it possible to store tires on the balcony

The average city dweller, who does not have a garage or a spacious storage room, wonders if it is possible to store tires on the balcony. This can really provoke the appearance of a number of problems, because the rubber will deteriorate considerably if spent outdoors for more than a month. Moisture and ultraviolet radiation will harm her. The latter will change the structure of the rubber - the tires will lose their elasticity and crack.

If you protect the rubber from the harmful effects of all factors, then it can lie on the balcony for up to six months. Every 30-40 days, the tires need to be rotated in order to change the fulcrum and redistribute the load - in this case, they probably will not deform. It often happens that the shape of the tread changes exactly in the place where the rubber was recently, therefore, the grip of the wheels with the road worsens.

Processing rubber before storage

Before you say goodbye to tires until next season, treat them thoroughly, because without it the rubber will deteriorate. Rinse the tires, dry them, remove stones from the treads. Processing with various means that can be purchased in specialized stores will not hurt.

Before using special products, do not forget to read their instructions for use. Tire life can be significantly reduced if the wrong cleaner is selected or used incorrectly.

What should the tires be protected from during storage?

Rubber does not tolerate certain weather conditions. She will not like moisture, ultraviolet and even wind. The optimum storage temperature should be between 18-25 degrees. The room must first be cleaned. Be careful when using electric heaters. They dry out the air, which provokes the appearance of cracks on the tires and their rupture during driving.

Do not place anything on top of the tires or to the side of them - static deformation will cause the rubber to "remember" a certain shape, but will not be able to return to its original state.

Tire storage services

If you yourself cannot create optimal conditions for storing rubber, then use the services of special companies. Be especially careful when drawing up the contract - study the paragraph where the temperature, humidity and other aspects of storage are indicated. Pay attention to the issue of compensation for damage in the event that the tires appear damaged.

Tire blackening agent used when caring for vehicle and giving it aesthetics. On the shelves of auto chemistry stores there is a wide range of such special products. A good alternative to some of them can also serve as folk, made by hand.

During the operation of the car, the wheels are most susceptible to the influence of external factors. Sun, water, salt, chemicals and bumps in the road are the main culprits for tire aging and loss of its original (shop) look. Restoration using the rubber blackening method will help restore freshness and former beauty. This can be done using several mixtures, in particular: glycerin, shoe polish, soap, silicone, or a specially developed liquid. To figure out the best way to blacken the tires, it is worth weighing all the pros and cons of each treatment.

Diy tire blackening procedure

Why blacken rubber and what will it give

First of all, you need to understand what it is, and so - this is the process of processing rubber with a specially designed liquid that does not stain black, but enhances the blackness and covers it with a protective layer. Such a tool not only gives more gloss, but also well protects the wheels from dirt, dust, and counteracts cracking. In addition, blackeners soften the rubber, thereby making it elastic, which contributes to the preservation of its integrity for a sufficiently long period.

Effect before and after treatment

Benefits of blackening tires:

Tire wear will be significantly reduced.
Contamination protection.
Masking small defects due to a layer of silicone glue.
The service life of rubber.

Blackeners can be purchased at any auto store, their price starts at 200 rubles, but if you decide to save your budget, then you can carry out this procedure at home, so we will further deal with the most popular methods of blackening tires.

Folk remedies for blackening tires

In search of a cheap, but good alternative that can give a 100% blackening effect, no matter what methods are used, not only the main components of professional products are used, but even carbonated sweet drinks, for example, such as Coca-Cola or Fanta.

The use of products containing sugar creates an imaginary impression of gloss. Soon they will start to look worse than before processing, as such a substance will strongly attract dust.

5 folk remedies and several special ones from the protective auto chemistry section are very popular and with satisfactory efficiency when blackening tires with their own hands.

There are the following tire blackening products:

Gutalin.
Glycerol.
Laundry soap.
Silicone oil.
Use of special composition

In absolutely all cases, without exception, before carrying out the tire blackening procedure itself, it is recommended to wash the wheels.

Shoe-polish - for blackening rubber

An analogy can be drawn here with boots. Any self-respecting man knows that no matter what the suit is, unkempt shoes will immediately catch your eye. And to return them to their original shine, you need to regularly use shoe cream. The situation is exactly the same with tires.

To blacken car tires at home, you can use shoe polish, or black shoe polish with wax. If shoe polish is old dryish, then to make it easier to apply, you can dissolve a little with kerosene.

Flaw:

does not look very aesthetically pleasing compared to other products;
lack of shine;
the coloring composition dries for a long time, therefore it is not recommended to go immediately after processing, you need to wait until everything dries out.

The simplicity of this method lies in the fact that such a tool can be found in every home and only a foam sponge is needed to apply it. Plus, some creams, as well as when rubbing shoes, may require additional wiping with a soft cloth.

Blackening tires with glycerin and water

The most common method is to use glycerin, which can be purchased without any problems at the pharmacy. Glycerin is a colorless, viscous and very hygroscopic liquid, miscible with water in any proportion. In order to blacken tires at home, you need only five jars of 25 ml or three jars of 40 ml, the preparation method is quite simple, you just need to mix glycerin with water in a ratio of 50 to 50 (1: 1).

If you need a greasy solution, then you can also 5 parts of glycerin to 3 water, then you will not need to spray the liquid, as in the first case, but just gently apply it with a pre-moistened sponge. Also, some more experimental drivers use proportions such as 1: 3 (the effect of increased fat content), 1: 5 (light shine) or 1: 7 (light matte effect), it all depends on the degree of tire burnout.

Remember that the more glycerin, the more your wheels will shine, but road dust will stick to them too.

The most important advantages of this method are:

Availability of materials.
Profitability and minimal financial costs, its cost is about 9 rubles.
Possibility of fast cooking.
Can be used frequently and can also be used on black plastic car body parts such as bumpers.

disadvantages:

fragility of using tires, namely drying and cracking of rubber at low air humidity;
after application, the rubber will have a shine, but since it is a greasy, sweetish liquid, the tire, although it will shine, will literally immediately begin to attract dust;
rinses off after the first contact with water.

The shiny effect can last only 2-3 days, and then, if there is no heavy rain, it is not recommended to wash the car after application, otherwise the tires will regain their previous appearance.

When using this method, the main thing is not to overdo it with the concentration of glycerin, as it can negatively affect the physicochemical state of the tire due to the fact that it is a fatty liquid, and tires do not like it.

Blackening rubber with laundry soap

It is difficult to imagine that such a seemingly common product as laundry soap can help with tire renewal. For this method, you will only need water, soap and medium-hard bristles (about 70%). To carry out this procedure, you must immediately clean the tire from dust and dirt, then thickly soap the brush and rub the rubber. There is also another way, for this you will need to grind the soap with a knife or grater and dissolve it in warm water. After preparing the solution, it is necessary to rub the tires well. Both methods are quite effective, after which your wheels will shine like new. The most important advantage of this method is its availability, ease of execution and cheapness. There is also another side of the coin, this method do not recommend using often, because soap is very dry rubber and significantly reduces their service life. Therefore, think once again before applying all sorts of liquids to rubber, so that later you do not have to replace it.

Silicone oil for tire blackening

This method is quite common among car owners because it is easy to implement. Most often, the PMS-200 brand is used for processing tires - silicone oil, which belongs to medium viscosity oils. The price for 1 liter of the product, as a rule, does not exceed 450 rubles.

This method is naturally more expensive than those described above, but if you buy 1 liter, you will have enough of it for a whole year, even with frequent use. It should also be noted that the effect after application lasts a long time, which is quite economical, with a small consumption of silicone. As for the use, they are also lubricated with tires, which are intended for off-season storage. They also lubricate the gum of the door seal or can be mixed with glycerin. Silicone, unlike other products, perfectly resists ultraviolet radiation, also protects against drying out, dust and condensation, which is quite an impressive fact when choosing the best folk remedy for blackening tires.

Other less popular tire blackening methods

Another way to blacken rubber at home with minimal financial costs using a detergent is to take Mister Muscle or galla(in the form of a gel), but cola, beer and other drinks(neat) that people use - create a sticky layer attracting dust and dirt.

So, in order to return the tires to their former look, you need to thoroughly wash the wheels with a glass cleaner, for example, Mister Muscle or any other, and then treat with coca-cola. Cola is applied from a sprayer to a brush (medium hard), and then rub the wheels with it. These steps must be repeated several times, and after the first time it is necessary to let the liquid dry. A half liter of drink is enough for about 10 washes. They say that after all these manipulations, the result is not bad, and the rubber is not sticky, but gets its rich black color due to cola dyes. You can repeat this method as soon as the blackness begins to disappear.

With dish gel, the situation is slightly different. Before applying it, you need to wash the wheels well. And then, already on a clean surface, apply with a small damp sponge. After processing, you do not need to cover with anything else. When it dries, it gives a good result. This folk way is often used by car washers.

But no matter how it was, it is still not possible to prepare the really best means for blackening tires at home. You will be able to achieve a short charcoal black effect until the first rain or off-road driving. So ideal option will be the use of specially designed formulations that can be purchased relatively inexpensively.

What to buy a means to restore gloss

When choosing a solution for treating tires, first of all, you need to pay attention to its composition. The result will depend on it. For summer, it is possible on a water basis, but for winter it is better if the product is based on silicone. Automotive stores offer a wide range of blackeners and they are all divided into two kinds:

Shiny- These are lubricants that consist of a large amount of silicone. After applying them, the tires will become shiny, and appearance more attractive. Disadvantage: they act for a short period of time, after dust or dirt, they can lose their original appearance.
Matte... They are used not only for tire processing, but also for the entire vehicle. After covering the rubber with this type of liquid, it will acquire a deep black color. The disadvantage of this type of blackening is the short period of action after contact with water, as a result of which their appearance becomes even worse than before dyeing.

Use various means for blackening tires, you can even daily, if it is not expensive for your wallet. But it will be much more effective to apply it to achieve a specific specified result after understanding the properties, purpose and consequences of processing. In various forums, you can often find a discussion of the topic of blackening, its need and meaning. Having studied several such discussions, having read the reviews and personal experience of use, we came to the conclusion that the 5 fluids presented below can be attributed to the best means for blackening rubber.

Blackening of wheels. Life hack against special means.

Doctor Wax, Dannev, Turtle Wax and Hi-Gear test

TOP 5 means for blackening

Blackening agent black gloss

To treat tires, use a special tool called "black gloss" (Turtle Wax), which is quite popular in car washes. The method of application is very easy to perform, you need to apply it to the side parts of the tires with a spray gun and wait about 10 minutes until it is completely dry. After application, you do not need to wipe the tires additionally. As for its cost, the prices for liquids start at 480 rubles. for 1 liter.

The benefits of this tool:

protection from dust and dirt;
unique antistatic properties for rubber prevent dust and dry road dirt from settling;
due to its hydrophobic properties, water and liquid dirt flow down from the treated surface;
improves the color of tires, does not dry them;
prevents cracking and discoloration of the rubber; after 6 days of testing, in rainy weather, the tires retained their black color.

Real tests of the Black Gloss product showed that the wheels lost their shine and began to attract dust about 9 days after application. At the same time, the car drove into the car wash and got caught in the rain a couple of times.

Getting the product on the tire tread is strictly not recommended! because silicone-based formulations reduce the braking performance of the vehicle. And also it is not advisable to allow contact with paintwork and headlights - the appearance may deteriorate.

If, nevertheless, the product accidentally gets on unwanted areas, then you can remove it with a dry soft cloth or microfiber.

Blackening of XADO Red Penguin rubber

For all the characteristics and precautions when applying to tires, you can read on the label. On our own note, after application, the wheels had a very attractive appearance. And if we compare the effectiveness of the persistence of blackness with TURTLE WAX, then definitely a red penguin will last a little longer. By the way, the price is also slightly lower - 420 rubles. for 1 liter.

Advantages:

rich black color;
maintains a long-lasting effect on tires.

Conditioner-cleaner for tires HI-GEAR HG5331

The method of application is quite simple, the foam must be evenly distributed from the cylinder to the tire and wait until it dries. Please note that the product can be applied to wheels only at temperatures between +15 - + 25˚С. Its price varies from 446 to 530 rubles.

Advantages:

can be applied to wet tires;
the presence of a polymer film after use, which is capable of repelling water and dirt.

disadvantages:

it is necessary to bring the wheels to the desired temperature;
dries up for a very long time;
the effect of wet shine, which the manufacturer claims, is absent at all.

Tire restorer DoctorWax

A special tool that is created for the restoration of rubber. Fills micro cracks and removes minor surface defects. It can be used not only for tires, but also for car mats. Designed to protect against the aggressive effects of salt and deicing agents.

According to customer reviews:

well refreshes, renews, protects rubber and plastic;
gives shine to seals;
has excellent water-repellent properties;
protects rubber from the aggressive effects of salts;
economical consumption.

From the comments, it should be noted that:

the effect is good enough, but not long;
the bottle is not very convenient to use, because the product leaks during application.
in rainy weather, for literally 2 days, after application, you can notice that the tires lose their color and shine, moreover, adhering sand and dirt are noticeable on the sidewalls, which indicates the complete absence of a protective film.

If you pay attention to the cost of this tool, due to the declared capabilities, then it is somewhat overestimated, because it ranges from 258 - 450 rubles. for 300 ml.

Dannev color restorer

The manufacturer claims that this rubber blackener helps to achieve a wet gloss effect, but whether this is actually the case remains to be checked.

disadvantages:

the ink does not resist ultraviolet light;
there is no protective layer;
after application, the wet shine disappears very quickly on tires;
a few days of rain, the effect of wet glitter is canceled out.

Advantage: deep black color can last for 2 days in rainy weather.

The method of application is also not very complicated, but care is still required in the work, the most important thing here is that the liquid does not get on the protector, brake disc, paintwork and headlights. As for the price, it costs about 258 rubles. for 250 ml.

After all of the above, I would like to note that as a result of the tests, the most effective remedy ended up Turtle wax(tire color restorer). It can be used with all exterior plastic and rubber body parts. But it is better not to use it inside the cabin, since it has a strong smell of solvent. The effect on tires lasts about 3 days. As for the blackener Dannev, then, taking into account the minimum cost, is also worthy of attention. In third place can be placed a very popular air conditioner-cleaner tires from HI-GEAR... Since for a not so different effect, it is not cheap. The last place in the TOP is taken by a tire restorer Doctor Wax, after all, it is intended to a greater extent to restore rubber products, and not to blacken tires.

Do-it-yourself rubber blackening

In order to carry out the blackening of rubber with your own hands, you need to take an old used toothbrush, which will help to wash all hard-to-reach places on the tire. After cleaning the rubber, you can immediately go directly to the blackening process itself. You will need a spray bottle with a liquid for processing, you can prepare it yourself in advance, or you can buy it at a specialized auto shop. During application, the product must be rubbed into the tire for the best effect. Then you need to wait a few minutes until the liquid is completely dry, but if you applied a product that foams, then you need to wait a little longer, about 20 minutes. Well, more and more you do not need to do anything, now with beautiful tires you can go to conquer the roads.

And so, the plan for blackening tires with your own hands will be like this:

We remove the top layer of dirt so that the product is better absorbed and does not collect dirt (mine, it is better if you do it with some kind of detergent).
Let the wheel dry, and the composition is not diluted with excess water.
Spray the product onto the wheel surface. Preferably in dry, calm weather.
Rub with a sponge or leave for a while (depending on how the instructions provide).
To consolidate the effect, it is recommended not to leave for about half an hour, so that the liquid is completely absorbed and dries out.

When processing with special products intended for cleaning and blackening, carefully read the instructions before applying! Some of them (those that are silicone-based) are contraindicated for getting into the contact area of the tire with asphalt, as this impairs grip, while others can be applied to the entire wheel (for example, for storage).

Summing up, we note that ...

By and large, there are 3 options for blackening rubber: the first is to do it yourself and using homemade remedy(shoe polish, glycerin or silicone oil); the second is to also do the processing yourself, but already using a specially purchased composition; the third is to give the car to the detailing center, where specialists will make for you for 300-500 rubles, observing all the technology. Each of them has its pros and cons, so it's up to you to decide which one is better. From an economic point of view, it is worth considering only the first two, using one of the five methods. The least expensive ones are glycerin, laundry soap and wax cream. There is at least some positive effect from glycerin and laundry soap, and shoe polish with wax, although it gives the rubber a black color, is not suitable for use at all. So home remedies are not very effective, and their low cost justifies it. The most expensive and effective folk method for blackening rubber turned out to be silicone oil, its effect is comparable to the store-bought means "Black Gloss". The cost of such a tool will cost 400-450 rubles, which is really enough for several treatments.

All the methods mentioned in this article have been tested in practice more than once and they really work. The most important thing is to wash and dry the rubber well before the procedure.

The correct storage of tires determines how long they can maintain their characteristics. If the manufacturer's recommendations are not followed, car tires may dry out and become covered with small cracks. Especially it concerns summer tires, since it is most often stored in the cold, somewhere in a shed, garage or balcony. Consider what you can do to protect the rubber from drying out?

How to store tires correctly?

Many drivers complain that when changing tires seasonally, the tire changer hangs too many weights on their wheels. This happens not because of the curves of the disks, but through the fault of the driver himself, who does not store the tires correctly. If the storage rules are not followed, the tire deforms, and it becomes very difficult to balance it. Therefore, it is necessary to remember a simple rule - tires on disks are stored in a pile when the wheels are stacked on top of each other. In rare cases, they are hung from the disc on the wall. Rimless tires are stored vertically.

Protecting rubber

To maintain the performance of your tires for a long time, they must be properly cared for. Before sending them for storage, the wheels must be washed. The most convenient way to do this is at self-service car washes. After that, it is advisable to cover the tires dried from water with a protective compound. Silicone oil, for example, grade PMS 200, is very suitable as such protection.

When applied to rubber, silicone creates a protective film. The resulting coating perfectly protects not only from drying out in the heat, but also from cracking in frost. Thus, the silicone is able to extend the life of the tires. To protect the rubber, you can use any available means that include silicone. You can even use silicone sprays to soak your shoes if you wish.

Photos from Internet resources