Standard equipment and accessories:
Equipment:
- The brake pad material does not contain asbestos.
- Centrifugal air cleaner.
- Regenerative cooling system.
- Cylindrical bonnet support with safety stop.
- Seat with improved suspension and safety belt.
- Hitch.
- Engine with system preheating(diesel).
- Sump fuel system(diesel).
- Steering with hydraulic booster.
- FTI transistor ignition (petrol engine).
- Reinforced top guard.
- High visibility mast.
- Hydraulic oil dipstick.
- Class 3 and 4 ITA chassis.
- J-lug tires with extended service life.
- Lift circuit shut-off valve.
- Load bearing wall.
- Load check valve.
- Top air intake system.
- Power brake.
- Hydraulic clutch with hydraulic booster (manual gear shifting).
- Retaining rollers.
- Returnable hydraulic filter.
- Suction filter
hydraulic system. - Tilt stop valve.
- Level control probe transmission oil(gear shifting from
amplifier). - Transmission oil filter (power shift).
- Fork 1070 mm (1220 mm for 5 tons).
- 2-spool control valve with pressure relief mechanism.
- 3-way catalytic muffler (gasoline engine), made in the USA.
Governing bodies:
- Electric shift lever (power shift).
- Lift and tilt levers.
- Multifunctional
switch (lighting and direction indicators) with an automatic return mechanism. - Parking brake lever with lock.
- Steering column with adjustable tilt.
- Handle for easy boarding.
- Signal buzzer reverse.
- Reversing lights.
- Improved floor mat with
anti-slip coating. - Clip for documents.
- Holder for documents.
- Electrical audible warning device.
- Front combined lights (direction indicators, dimensions).
- Glove box / Fountain pen holder.
- Headlights.
- High mounted combination rear lights (tail lights, brake light, reversing light, direction indicators and reflector).
- Driver's tool kit.
- Overhead guard awning.
- Side view mirrors.
- Tilt cylinder covers.
Instruments and switches:
- Air cleaner clogging indicator.
- Charging indicator.
- Check engine light (for gasoline engines), made in the USA.
- Engine oil pressure indicator.
- Fuel gauge.
- Fuel system sump indicator.
- Glow plug indicator (diesel).
- Operating hours counter.
- Engine ignition cut-off system (diesel).
- Neutral safety switch.
- Water temperature gauge.
Additional load devices:
- Forks of various lengths.
- Grab for bales.
- Gripper for cardboard (on request).
- Crane console (on request).
- Barrel grab (on request).
- Forks (on request).
- Fork extensions. Fork setting device (hydraulic type).
- Installation device
pitchfork (manual type). - High and wide load support wall.
- Swivel forks, bucket.
- Load pusher (on request).
- Load balancer (on request).
- Ram.
- Swivel bale grab.
- Swivel forks (mounted, built-in type).
- Rotary gripper for paper roll (mounted, built-in type).
- Side shift device.
- Hook with sleeve (on request).
- Widened fork carriage. 2-stage wide view mast (VFM). 3-stage wide view mast (VFHM).
Additional equipment and auxiliary mechanisms:
Equipment:
- Air conditioner (steel cabin).
- Auxiliary hydraulic valve modules.
- Centralized lubrication system.
- Colored tires (white, green).
- Exhaust system with filter (diesel).
- Double element air cleaner.
- Pre-engine air cleaner.
- Silencer with catalyst for cleaning exhaust gases.
- Front driving dual wheels.
- Heater.
- Heater and defroster (steel cabin).
- High top safety railing (2400 mm).
- Hydraulic oil cooler (diesel).
- Low top safety railing (2130 mm).
- A device for operation on liquefied gas or combined fuel (petrol engine).
- Overhead exhaust system.
- Radiator with plate fins.
- Dust net for radiator (small and medium mesh).
- Semi-built-in power steering.
- Silencer with smoke filter and spark arrester (diesel).
- Solid tires (special soft tires).
- Steel cabin.
- Windshield with wiper.
- 4-cylinder mast.
Accessory equipment:
- Coloring as agreed with the customer.
- Fire extinguisher.
- Rear work lights.
- Rotating warning light (beacon).
- Rotary cylinder cover.
- Tilt cylinder cover.
Instruments and switches:
- Ammeter.
- Control monitor (fuel level, battery electrolyte level, coolant level, parking brake, air cleaner).
- Speedometer.
- Torque converter hydraulic oil pressure gauge.
- Torque converter hydraulic oil temperature gauge (power shift).
TSM SSL 709 - Japanese skid steer loader off-road. This model developed in accordance with the requirements approved by international norms and standards. The technique meets the requirements of the most demanding users, which is confirmed by factory tests and many years of practice. The device in question is developed from time-tested Japanese components. At the same time, TCM has used innovative components in its car, which speaks of the high technological effectiveness of the product. This article discusses the main features of the TCM SSL 709 front loader, its advantages, characteristics, cost and operating features.
Appointment
Mini-loader TCM SSL 709 is a loader of the professional segment, and is one of the best in its price category. This can be seen from the functionality of the machine. The technique is adapted for construction and communal tasks, as well as agricultural work. In particular, the SSL 709 model can be used for cultivation and harrowing of the soil, as well as mowing vegetation, unnecessary weeds and bushes. In addition, the machine is also suitable for earthmoving operations. In utilities, the potential of this loader can be unleashed in operations related to the cleaning of territories and areas, highways, public places, etc. Alternatively, this device is perfect for patching roads, or road construction, as well as the construction or destruction of buildings and structures to be demolished. The TSM SSL 709 is regarded as a multipurpose tool for loading and transporting materials. All of the above tasks can be accomplished thanks to the attachment support, which is presented below in the article.
Video
Attachments
- Snow blade - a device for working in winter period... Powered as standard, which means manual blade tilt adjustment. More advanced, automatic version, the blade is hydraulically driven. In this case, there is no need to leave the cab, since the tilt angle is adjusted using a lever from the operator's cab.
- Pallet forks - a device with capabilities forklift... It is used to work with loads that are usually placed exclusively on pallets. The width of the pallet forks is adjusted based on the shape and dimensions of the cargo. Depending on the modification, forks with different carrying capacities are distinguished.
- A lifting telescopic boom is a special device with a lifting capacity of up to 2 tons, depending on the version, designed to move goods in the air. This is a very convenient option in conditions where it is not possible to move the load over the surface due to the presence of obstacles. In order for the crane hook of the boom to rotate in any plane, the equipment is equipped with a special articulated support.
- Log grapple - equipment used as a means of grasping cylindrical objects - piles, poles, pipes and logs. Thanks to flexible hydraulic hoses, the log grapple functions without interruption and is highly resistant to high pressure in the hydraulic system. The maximum lifting capacity of the hydraulic gripper is 5 tons.
- Frontal bucket - attachments for front installation on a forklift. The range of bucket capabilities is the main scope of work, including cleaning and transporting snow and debris from one place to another. In terms of its capabilities, it is definitely inferior to specialized buckets.
- Snow bucket is a specialized version of a standard bucket designed for cleaning dry and wet snow, as well as packed and icy snowdrifts. The material of this bucket is made of stainless steel, which indicates a high resistance to damage. We also note good anti-corrosion protection. As a result, the bucket will last significantly longer.
- Dozer blade - attachments with mini-bulldozer capabilities. At the same time, the loader itself is not at all limited in functionality. In this case, it is adapted to transport soil, snow, sand and other bulk materials... The dozer blade has a pivoting function, that is, the blade angle can be adjusted relative to the front axle of the loader.
- The two-jaw bucket is a device with a complex structure, which is represented by two working "jaws", closing with each other. This is to ensure that the captured load is inside the bucket and does not fall out. Interestingly, the jaws themselves are closed with each other through hydraulic drive, that is, using a lever from the operator's cab.
- Brush - utility equipment for cleaning dust, debris, leaves or freshly fallen snow. This device is useful in cases where you need a quick and effective cleaning large volumes of roads and sidewalks from debris, including unnecessary construction waste - sand, soil, crushed stone, etc. Depending on the modification, there are road and rotary brushes, as well as industrial brushes with a hopper.
- The clamping fork is an agricultural option for handling fibrous materials. In particular, we are talking about flax fiber, hay, loosened haylage, cut grass and other similar materials with a density of about 800 kg per 1 cubic meter. Most the best option are interchangeable agricultural forks mounted on a forklift. They are suitable for transporting hay and straw.
- Agricultural forks with grab - attachments, improved in comparison with the above option. It has a lifting capacity of up to 4 tons and is equipped with a special grip that allows you to grab cut grass (or any other fibrous material with a density of 800 kg per 1 cubic meter). In addition, the grip prevents accidental spillage of the load during transportation.
- The cradle is a convenient device for working at height. It is a lifting platform that raises the operator to a certain height. The wide doorway provides easy access to the platform. Among the work performed, available with lifting platform, you can select the installation or broach high-voltage wires, lighting shades, fire detectors, painting ceilings, finishing facades, as well as other types of work performed at height - both outside and inside premises and structures.
- Bucket adapter - Special equipment for reinforced attachment of heavy attachments. In fact, it is optional accessory for a more secure hold on high-capacity buckets.
- The Bucket Knife is an optional attribute for the Snow Bucket that can be used to clear snow drifts more efficiently and quickly. In particular, the bucket knife allows you to remove hard and packed snowdrifts along with ice.
Features of the device
- Front-end mini-loader TSM SSL 709 is equipped with a 33 hp engine. sec., and the torque is 155 N / m. This is enough to unleash the potential of all working and mobile devices. In addition, there is enough power to fully assess the capabilities of the wheeled chassis. The engine is liquid-cooled, which provides efficient control of the internal combustion engine parameters to prevent overheating. In addition, the package includes preheater, thanks to which there will be no problems with starting the engine in cold weather. In addition, there is no need to wait for the engine to warm up and start driving immediately.
- The machine is equipped with rubber wheels with a metal rim. The deep tread allows you to negotiate obstacles such as country roads and raised hills. That is, there is an opportunity to move not only on asphalt roads. Good geometric cross-country ability was achieved, among other things, due to the short wheelbase, minimal body overhangs and a large ground clearance... We also add decent maneuverability along with a small turning radius - this provides the ability to avoid various obstacles, including due to good feedback.
- Rather heavy wheels make the loader heavier and thus increase its lifting capacity. It is 1000 kg, and maximum speed the car at the same time reaches 12 km / h. The wheelbase is 930 mm.
- TCM SSL 709 is primarily a mini loader, one of the most compact front loaders. It is equipped with a small single-seat cab with a wide glass area for the sake of good visibility. Protection is provided by side metal nets, which will be needed in case the forklift rolls over. In this case, the operator will remain protected. In addition, the rigid cab frame contributes to this. The interior of the cockpit is organized in a minimalist style, without innovative and advanced solutions. But the level of ergonomics is excellent. Note the well-placed levers and switches. The steering column and seat can be adjusted to your liking, and the heating system can also be adjusted, which is very useful in the cold season.
- Convenient organization of the engine compartment indicates a good maintainability of the product, as well as a low cost of ownership due to cheaper components than competitors. Air and fuel filters installed in such a way that they can be quickly removed and replaced without using a special tool. The same applies to assemblies and assemblies, as well as components power plant and gearboxes.
Specifications
- Carrying capacity - 1000 kg
- Engine brand - V2403-M
- Engine type - diesel, 4 cylinders, 33 HP with.
- Rotational speed - 2400 rpm
- Torque - 156 N / m
- Cylinder diameter - 87 mm
- Piston stroke - 102 mm
- Wheelbase volume - 930 mm
- Dimensions, mm: Length - 3090, Width - 1535, Height - 1940 mm
- Battery parameters: 12V; 64 Ah
- Disc brakes - yes
- Unloading height - 2200 mm
- Tire parameters - rubber, 10-16.5-6PR
- Front track - 1250 mm
- Back track - 1250 mm
- The depth of the overcome rise - 30 degrees
- Turning radius width - 2300 mm
- Seat - yes
- Working body capacity - 0.35 cu. m.
- Bucket cutting edge - 1670 mm (width)
- The type of standard working body is a bucket.
Price
Average cost of a TCM SSL 709 wheel loader at Russian market is 2 million 100 thousand rubles. The price is for a 2018 model year car.
home
Diesel forklifts TSM
TCM modernized diesel forklifts l / c 1.0-3.0 tons in its tradition - using high technologies and the legacy of many years and multifaceted experience in the production of forklifts. Pursuing a corporate policy - to go one step ahead of the rapidly changing environment of floor transport, TCM has redesigned this series of trucks in order to further improve their performance, an even more powerful engine, easier to operate and more reliable.
high-performance engine (Displacement 3300 cc)
increased maneuverability (modern accelerator pedal design, electric ignition handle)
increased safety (seat equipped with side anchorage, improved visibility in front of the operator)
increased reliability (improved engine cooling system, aluminum radiator, increased air intake to the engine)
Comfort and ease of handling forklifts very important for operators who work continuously for several hours. Ergonomically designed pedals and levers maximize operator comfort.
These features contribute to ease of operation, even for inexperienced operators, and can significantly reduce fatigue.
High-power KUBOTA V3300 engine for loaders with a lifting capacity of 2.0 - 3.0 tons. Volume 3318 cbm see Rated power 50.0 kW (67 HP) / 2500 rpm. per minute. Maximum torque increased by 10% over previous models. 226.4 Nm (23.1 kg-m) / 1800 rpm
Upgraded diesel engine С240, l / c 1 ton. Rated power 38.3 kW (52 HP) / 2500 rpm
Improved gasoline engine. Torque increased by 10% on Idling... Generator with more power 50A compared to previous 35A models. Cooling system with more powerful fans.
More comfortable to operate; modern design of the brake pedal and accelerator, namely 20% less effort on the brake pedal, 50% less vibration of the brake pedal, equipped with a footrest. Combined light and turn signal switch knob with mechanism automatic shutdown at the end of the turn. Models with automatic transmission equipped with an electric ignition lever in addition to the conventional ignition key. More roomy fuel tank 70 liters for models with a lifting capacity of 2-3 tons, 50 liters for models with a lifting capacity of 1-1.8 tons. Easy-to-open hood with one push on it.
More safe. Increased visibility in front of the operator by 15% on loaders with a lifting capacity of 2-3 tons equipped with a standard mast. 30% increased area of the step for lifting and lowering the loader to enter the cab, the operator's seat is equipped with a seat belt, the shockless lift cylinder reduces noise and softens the impact when contacting the forks with the surface, the parking brake handle is equipped with a safety lock. The new models are equipped with a special air intake, which significantly improved the cooling system, an upgraded aluminum radiator, a larger engine air intake contribute to a longer lifespan of the truck. Optional equipment - exhaust pipe for diesel models equipped with a special device that traps black smog emitted diesel engine... These emissions are automatically burned.
Loader specifications See table
Diesel forklifts, gasoline forklifts (lifting capacity from 2.0 to 10.0 tons)
Best loaders in its class. Convenient in work, easy to maintain and small in size. The main features of this series are: high lifting and lowering speeds, a high mast with a wide view and reliable powerful engines. Loaders TCM of this series surpass all existing analogues with a carrying capacity of 2.0 - 10 tons.
TCM Standard Equipment
Lift with wide view
ITA Class 2 chassis
Fork length 1070 mm
Durable J-Lag tires
Power steering
Protective roof
Suspension seat
Towing device
Air filter cyclone type
Parking brake with safety lock
Fork lift and mast tilt control handle
2-Stage Pressure Relief Valve Control Valve
Hydraulic oil level indicator
Transmission oil level indicator
Return filter in the hydraulic system
Oil filter in the transmission system
Cargo weight control valve
Load lifting circuit cut-off valve
Mast tilt lock valve
Halogen headlights
Rear combination lights
Rearview mirror
Reverse buzzer
Reversing light
Electric horn
High quality rug
Overhead guard tarpaulin
Cylindrical roof pillar
Air intake system located above the driver's head
Expanded radiator reservoir
Steering block with adjustable angle
Asbestos-free brakes
Direction indicators
Water separator (D)
Power brakes
Hour meter
Water temperature indicator
Fuel level indicator
Hand vise
Operator Tool Kit
Additional cargo equipment for installation on a TCM loader
Two-stage VFM mast with free play and wide view
Three-stage mast VFHM with free play and wide view
Lifting carriage forks
Long pitchfork
Extended Fork Attachments
Side shift forks
Mounted fork carriage
Fork gripper
Bale grab
Rotating bale grab
Gripper for paper rolls
Capture for blocks
Rotating pitchfork
Crane handle
Drum pin
TCM Loader Specifications See Table
Acroba is a new series of loaders... Distinctive design feature loader consists in the fact that it can move perpendicular to its longitudinal axis. ... This function is especially useful for the maintenance of spaces with limited space. The main advantages are also the following: zero turning radius, articulated driver's seat for easier and safer handling, and 2x2 HST system, which ensures the movement without slipping. Switching between normal and lateral movement is done in 3 seconds using a lever. In addition, the loader is capable of stowing loads in the corners of heavily cluttered spaces. Overall storage efficiency increased by 10-30%.
Forklift ergonomics
To reduce operator fatigue, the loader is equipped with an operator's seat with a 450 rotation function. This allows the operator to use an additional accelerator and reduce the need for body turns when driving backwards. Thanks to the function of the chair rotation by 450, an excellent rear view is provided. Reduces operator fatigue when driving backwards by approximately 30-60%. To facilitate the operator's work, all levers and steering wheel are equipped with servo amplifiers
Easy start and normal movement of the truck on uneven roads
The series implements an easier start and movement with a propulsion system adapted to difficult conditions, where conventional propulsion drives show unexpected and unstable results.
Low noise and vibration levels.
The innovative motion system provides significant reduction in vibration and noise levels. In addition, the total number of components has been reduced to 100, making maintenance easier.
Diesel forklifts (lifting capacity from 11.5 to 42.0 tons)
Diesel forklift trucks TCM large carrying capacity are used when loading sea containers, steel and wood products and other heavy cargo. These machines are different low level noise (85 dB), three-speed transmission, and a large and powerful motor (224 kW), as well as the fastest lifting speed in its class. There are also models heavy-duty forklifts(37 - 42 tons) which are equipped with high-tech equipment, these loaders are designed to work in many modern ports. Loader model TCM FD420 is unique - it allows you to stack shipping containers in five rows. In all models, the soot content in exhaust gases has been reduced by 30% and toxicity by 50%. All loaders have improved visibility.
Characteristics of diesel forklifts
Diesel forklift standard equipment and accessories
Lift with wide view
Air filter "Cyclone"
Cargo weight control valve
Engine warm-up indicator
Towing device
Rear cargo guard
Protective roof
Power brake
Durable tires
Power steering
Expanded radiator reservoir
Direction indicators
Battery charging indicator
Hour meter
Engine oil pressure drop warning indicator
Water temperature indicator.
Fuel level indicator
Reversing light
Stopping the engine with the ignition key
Neutral safety switch
Mirrors
Reverse buzzer
Suspension seat with safety belt
Tilt steering column
Additional cargo equipment
Side shift forks
Fork positioning device
Mounted fork carriage
Extended Fork Attachments
Long pitchfork
Optional equipment and accessories
Centralized lubrication system
Fire extinguisher
Exhaust catalytic filter
Steel cabin
Heater
Rear working light
Spark arrester
Exhaust system located above the driver's head
Water separator
Mast Tilt Cylinder Covers
Power steering cylinder cover
Speedometer
Radiator with protection
© 1999 - 2019 ..
The site is under the protection of O. V. Stuchilin. - criminal lawyer
Standard equipment and accessories:
Equipment:
- The brake pad material does not contain asbestos.
- Centrifugal air cleaner.
- Regenerative cooling system.
- Cylindrical bonnet support with safety stop.
- Seat with improved suspension and safety belt.
- Hitch.
- Engine with preheating system (diesel).
- Sump for the fuel system (diesel).
- Steering with hydraulic booster.
- FTI transistor ignition (petrol engine).
- Reinforced top guard.
- High visibility mast.
- Hydraulic oil dipstick.
- Class 3 and 4 ITA chassis.
- J-lug tires with extended service life.
- Lift circuit shut-off valve.
- Load bearing wall.
- Load check valve.
- Top air intake system.
- Power brake.
- Hydraulic clutch with hydraulic booster (manual gear shifting).
- Retaining rollers.
- Returnable hydraulic filter.
- Suction filter
hydraulic system. - Tilt stop valve.
- Transmission oil dipstick (gear shifting with
amplifier). - Transmission oil filter (power shift).
- Fork 1070 mm (1220 mm for 5 tons).
- 2-spool control valve with pressure relief mechanism.
- 3-way catalytic muffler (gasoline engine), made in the USA.
Governing bodies:
- Electric shift lever (power shift).
- Lift and tilt levers.
- Multifunctional
switch (lighting and direction indicators) with an automatic return mechanism. - Parking brake lever with lock.
- Steering column with adjustable tilt.
- Handle for easy boarding.
- Reverse alarm buzzer.
- Reversing lights.
- Improved floor mat with
anti-slip coating. - Clip for documents.
- Holder for documents.
- Electrical audible warning device.
- Front combined lights (direction indicators, dimensions).
- Glove box / Fountain pen holder.
- Headlights.
- High mounted combination rear lights (tail lights, brake light, reversing light, direction indicators and reflector).
- Driver's tool kit.
- Overhead guard awning.
- Side view mirrors.
- Tilt cylinder covers.
Instruments and switches:
- Air cleaner clogging indicator.
- Charging indicator.
- Check engine light (for gasoline engines), made in the USA.
- Engine oil pressure indicator.
- Fuel gauge.
- Fuel system sump indicator.
- Glow plug indicator (diesel).
- Operating hours counter.
- Engine ignition cut-off system (diesel).
- Neutral safety switch.
- Water temperature gauge.
Additional load devices:
- Forks of various lengths.
- Grab for bales.
- Gripper for cardboard (on request).
- Crane console (on request).
- Barrel grab (on request).
- Forks (on request).
- Fork extensions. Fork setting device (hydraulic type).
- Installation device
pitchfork (manual type). - High and wide load support wall.
- Swivel forks, bucket.
- Load pusher (on request).
- Load balancer (on request).
- Ram.
- Swivel bale grab.
- Swivel forks (mounted, built-in type).
- Rotary gripper for paper roll (mounted, built-in type).
- Side shift device.
- Hook with sleeve (on request).
- Widened fork carriage. 2-stage wide view mast (VFM). 3-stage wide view mast (VFHM).
Additional equipment and auxiliary mechanisms:
Equipment:
- Air conditioner (steel cabin).
- Auxiliary hydraulic valve modules.
- Centralized lubrication system.
- Colored tires (white, green).
- Exhaust system with filter (diesel).
- Double element air cleaner.
- Pre-engine air cleaner.
- Silencer with catalyst for cleaning exhaust gases.
- Front driving dual wheels.
- Heater.
- Heater and defroster (steel cabin).
- High top safety railing (2400 mm).
- Hydraulic oil cooler (diesel).
- Low top safety railing (2130 mm).
- A device for operation on liquefied gas or combined fuel (petrol engine).
- Overhead exhaust system.
- Radiator with plate fins.
- Dust net for radiator (small and medium mesh).
- Semi-built-in power steering.
- Silencer with smoke filter and spark arrester (diesel).
- Solid tires (special soft tires).
- Steel cabin.
- Windshield with wiper.
- 4-cylinder mast.
Accessory equipment:
- Coloring as agreed with the customer.
- Fire extinguisher.
- Rear work lights.
- Rotating warning light (beacon).
- Rotary cylinder cover.
- Tilt cylinder cover.
Instruments and switches:
- Ammeter.
- Control monitor (fuel level, battery electrolyte level, coolant level, parking brake, air cleaner).
- Speedometer.
- Torque converter hydraulic oil pressure gauge.
- Torque converter hydraulic oil temperature gauge (power shift).
Loader TSM is vehicle, used on construction sites, in warehouses, as well as for performing public works.
Features of the device
Loading equipment device includes the following parts and mechanisms:
- Engine alternating current... It consists of a cylindrical stator made of steel sheets. The axes are located on it at an angle, and the poles of the windings go to the terminal. Also, the engine is equipped with a rotor, ventilation system, generator.
- Unit control system. This includes the gearbox, electrical equipment.
- Chassis.
- Brake mechanism. It is equipped with a hydraulic booster for better traction.
- A load lifting device is a retractable mast on which a load is placed for transport.
- Tires.
- Optional equipment. This can be a snow blower, a special clamp for transporting household appliances, etc.
- Batteries that power the entire electrical system of the truck.
Specifications
Loader TSM specifications depend on the selected model and the specification of the unit.
Forklift
Technical indicators:
| Maximum lifting capacity | 3000 kg |
| Powertrain model | QD32 |
| Fuel fluid | Diesel |
| Engine displacement | 3.2 l |
| Power | 36 horsepower |
| 2150 rpm | |
| 18.5 km / h | |
| Center of gravity of the load being lifted | 0.5 m |
| Mast length | 2.25 m |
| Fork lifting height | 3m |
| Wheels | Pneumatic |
| Wheel formula | 2*2 |
| 2.4 m | |
| 114 mm | |
| Piston stroke | 130 mm |
| Transmission | Mechanical |
| Number of gears | 4 |
| Dimensions (edit) | 2,77*1,23*2,15 |
| Ground clearance | 300 mm |
| Wheelbase | 2450 mm |
| Parking brake type | Manual, disc |
| Fuel tank volume | 150 l |
| Weight | 4365 kg |
Forklift TCM FD30T3Z is used for lifting, transportation and storage of goods, pallets, pallets, etc.
Frontal
Technical Parameters of Front End Loader:
| Maximum weight of the lifted load | 5000 kg |
| Engine model | V3300 |
| Fuel | Diesel |
| Number of cylinders | 4 |
| Power | 47.8 horsepower |
| Rated crankshaft rotation | 2500 rpm |
| Highest torque | 1800 rpm |
| Diameter of cylindrical elements | 0.98 cm |
| Piston stroke | 11 cm |
| Maximum travel speed without load | 12 km / h |
| Unit wheelbase | 0.93 m |
| Battery capacity | 12 in |
| Service brake | Disc, wet type |
| Service brake pedal lock | There is |
| Unloading height | 2.2 m |
| Tire size | 10-16.5-6PR |
| Options | 31.6 * 15.4 * 2.04 m |
| Overcome climb | 30 ° |
| Overall radius | 2.3 m |
| Rear wheel track | 1.25 m |
| Working body capacity | 0.35 m3 |
| Cutting edge width | 1.67 m |
| Front wheel track | 1.25 m |
Bucket
Technical indicators of bucket technology:
| Weight of the lifted load | Up to 2,500 kg |
| Engine | V2 709 -M |
| Fuel fluid | Diesel |
| Power | 33 horsepower |
| Number of cylindrical elements | 4 |
| Rotation frequency | 2400 rpm |
| Working body | Ladle |
| Bucket capacity | 0.35 m3 |
| Diameter of cylindrical parts | 0.87 cm |
| Piston stroke | 7.09 cm |
| Wheelbase | 0.93 m |
| Battery | 12 in |
| Brake type | Disk |
| Front wheel track | 1.25 m |
| Rear wheel track | 1.25 m |
| Overcome climb | 30 ° |
| Dimensions (edit) | 3.09 * 1.53 * 1.94 m |
| Cutting edge width | 1.67 m |
| Turning radius | 2.3 m |
| Tire size | 10-16.5-6PR |
The equipment is equipped with an engine with a liquid-type cooling system, which prevents overheating of all parts of the mechanism. To start the unit in the cold season, a pre-starting heater is provided in the design.
Mini
Technical characteristics of the TCM mini loader:
| Lifting capacity | 1750 kg |
| Powertrain model | V3300 |
| Fuel fluid | Diesel |
| Power | 47.8 horsepower |
| Crankshaft speed | 2500 rpm |
| Maximum travel speed | 10 km / h |
| Cargo unloading height | 2.4 m |
| Tires | 12-16.5-6PR |
| Battery | 12 in |
| Wheels | Pneumatic |
| Wheel formula | 2*2 |
| External overall turning radius | 2.4 m |
| Torque | 1800 rpm |
| Diameter of cylindrical elements | 0.98 cm |
| Piston stroke | 11 cm |
| Overcome climb | 30 ° |
| Number of cylinders | 4 |
| Dimensions (edit) | 3,33*1,68*1,96 |
| Ground clearance | 0.3 m |
| Wheelbase | 1.04 m |
| Parking brake type | Disk |
| Fuel tank volume | 100 l |
| Width of the cutting edge of the working body | 1.75 m |
TCM forklift repair and causes of malfunctions:
- Transmission failure can be caused by low system pressure, dirty oil filters, or a defective safety valve. It is necessary to adjust the pressure, clean the filters, replace the worn out parts.
- Loss of power can be associated with low oil temperature or low oil levels, as well as air ingress into the system. It is necessary to change the oil, remove the air.
- In case of problems with the clutch, inspect the mechanism for damage and repair them.
We repair equipment only with the help of special equipment and in protective clothing: glasses or a mask.
