Cars of the Ulyanovsk plant are widely used not only in the territory of the Russian Federation, but also abroad. , which is often tuned by car owners, has high technical performance. Motorists modernize equipment based on the tasks that are set for the car. To improve technical performance, the owners perform body and interior tuning on a UAZ loaf car.
Tuning of the UAZ "Loaf" salon
The factory-fitted car has a low level of comfort. In order to increase comfort, the interior is being tuned. Each person improves the salon to his taste.
The seats are being replaced in the car. They change not only the front, but also the rear seats. This helps reduce passenger and driver fatigue when traveling long distances.
The inner side of the body is treated with soundproofing materials. Insulate all body surfaces. This reduces the level of noise transmitted to the passenger compartment from the wheel chassis and power plant car.
The steering wheel of a UAZ car is replaced with a more comfortable one. The choice of the steering wheel is complicated by the difference in the splines. Some car owners leave the factory steering wheel and upgrade it. For this on wheel a specialized cover is put on.
Front, the panel is sheathed with various materials or carried out full replacement torpedo. Additional devices are installed in the panel. This allows you to control the operation of units and mechanisms while driving.
During modernization, the standard interior lighting is changed to a brighter one. Good lighting allows the UAZ car to be used as a home on wheels for short-term trips to nature.
In order to improve ventilation, a hole is cut out in the roof for installing a hatch. The sunroof is made independently or devices are installed from cars of other brands. A hatch fits well passenger bus GROOVE.
External tuning "Loaf"
The owners carry out tuning of the UAZ loaf car not only inside, but also outside. The body is treated with anti-corrosion materials. This protects the metal from negative environmental influences.
Additional lighting is installed on the machine. This allows the use of UAZ in poor visibility conditions. For additional lighting, choose LED lights. They consume a minimal amount of electricity. This reduces the load on the generator when the machine is moving in dark time days.
The lower part of the body is sheathed with durable materials. They protect the body from damage when driving off-road.
UAZ has a large body area. Tuning cars, standard paintwork changes to a more original one. When painting, some motorists perform airbrushing. This makes the car unique.
Steps are installed in the lower part of the body. They are necessary to facilitate the embarkation and disembarkation of passengers from the car. To illuminate the coating when leaving the car at night, LED strips are installed at the bottom of the doors.
A metal roof rack is installed on the roof. It is made from metal pipes. Installing a trunk allows you to carry additional cargo. You can also read about.
REFERENCE: The luggage carrier can be equipped with a specialized holder for transporting a spare wheel.
Tuning UAZ Loaf for hunting and fishing
UAZ 452 is used for fishing and hunting. This is due to the high rates of cross-country ability of the car on difficult sections of rough terrain. For fishing and hunting, the owners modernize the interior and bodywork, and undercarriage cars.
Modernization of the undercarriage allows for increased cross-country ability vehicle on poor coverage. To do this, increase the ground clearance, install tires off-road etc.
For fishing trips, berths are equipped in the cabin. Thanks to this, you can spend the night in nature, regardless of the weather conditions. To increase the usable space in the passenger compartment, the standard rear seats are replaced with benches.
Carrying out tuning for hunting and fishing on a UAZ car, motorists set up a table. It is fitted in the rear of the passenger compartment on a side wall or partition. The table has a folding structure that allows you to unfold it if necessary. The presence of the table allows you to use the internal space of the machine as a mobile dining room.
On the inside, the body and doors are equipped with waterproofing and thermal insulation. This allows the machine to be used in all weather conditions. After installing the insulation, the inner surfaces of the body are sheathed with easily washable materials. This design allows you to quickly clean up the resulting contamination.
When using the machine at low ambient temperatures, upgrade the autonomous heater. For this, a more powerful electric heater motor is installed.
ATTENTION: Installation of additional electrical equipment requires replacement of the standard generator with a more powerful model.
UAZ Loaf tuning for off-road
Some perform off-road tuning on the UAZ loaf. This increases the cross-country ability of the car. In order to improve the cross-country ability, the machines are being upgraded:
- Wheelbase;
- The chassis of the car;
- Body kits;
- Transmission units.
During modernization, the standard wheels are changed to larger ones. Tires with a cross-country pattern are installed on the new discs. The height of the wheels increases ground clearance cars. The width of the wheels reduces the amount of ground pressure when the machine is moving.
The front and rear bumpers of the car are equipped with winches. They are electrically driven. Some manufacturers equip the winch with a remote control.
WARNING: the standard bumper will not be able to withstand the load transmitted from the winch. To use the winch, you must install reinforced body kits. They can be purchased at specialized stores.
Fitting new wheels requires enlarging the wheel arches. There are three ways to increase the distance between tires and fenders:
- Upgrading the wheel arches. To do this, cut off the lower part of the wings. The resulting cut is sheathed with a metal profile, giving the required shape;
- By installing springs with a large number of sheets and elongated attachment shackles. This method increases the distance between the frame and the axles of the vehicle;
- Installing pillows between the frame and the body of the UAZ.
UAZ loaf tuning the salon with your own hands
Many owners do their own tuning on the UAZ loaf. Self-upgrade has a number of advantages:
- Uniqueness. The owner creates a unique interior design;
- Quality. When performing modernization on his own, a person himself controls the quality of the materials used;
- Versatility. Each owner takes into account their personal preferences.
Modernization of the torpedo
The front panel is sheathed with leather, plastic or thin sheets of metal. This makes it possible to make a unique product. Corrugated aluminum sheets are suitable. They withstand mechanical damage and can be easily cleaned from dirt using a soap solution.
Engine compartment
To reduce noise from power unit the engine compartment cover is equipped with soundproofing. On the outside of the lid, shelves are installed for storing small things. Some car owners equip the engine compartment lid with cup holders.
Steering column
The steering column is covered with a plastic case from other brands of cars. Combination switches are installed on the steering column. The ignition lock with a torpedo is transferred to steering column.
Seating
Standard seats have low level comfort. Motorists are replacing driver and passenger seats. For installation in the rear of the passenger compartment, seats with different sizes... For relaxation, armchairs are installed that fold out into a full berth.
There is limited space in the front of the vehicle for seating. Therefore, it is necessary to choose narrow seats. The front seats are located above the wheel arch. Therefore, for installation, you must choose products with a low back.
Body tuning UAZ loaf
Motorists perform tuning of the UAZ loaf body with their own hands. Depending on the task performed by the car, the following is installed on the body:
Body kits and kengurin
When using a car in difficult conditions, the UAZ is equipped with a kengurin and reinforced bumpers... They protect the body from damage from blows from branches and stones.
Unique reinforced body kits and kangurin can be obtained in two ways:
- Order the manufacture of a product from professional welders. Workers will make bumpers and kengurin strictly according to drawings;
- Make the parts yourself. This will require certain skills.
Branch protection
When using the machine for driving in woodlands, the windshield is prone to damage from blows from branches. A special device is used to protect the windshield from branches.
The device is made in the form of two cables. The lower edge of the cables is attached to the kangurin. The upper edge of the product is attached to the roof in the area of the windshield pillar. The cables are equipped with a tensioning device. When the car moves, the branches hit the cables without touching the windshield.
Reinforced trunk
A reinforced roof rack is installed on the roof. It is made from metal pipes or profiles. The trunk protects the paintwork from blows by branches, and allows you to carry loads on the roof weighing up to 300 kilograms.
In the manufacture of the roof rack, you can equip mounts for the installation of outdoor headlights. To avoid damage to the glass of the headlights, they are located on the inside of the frame. When using UAZ for trunk hunting, side and rear lights are installed. They allow you to illuminate the area around the car.
Off-road tuning UAZ loaf
In order to move off-road, they independently modernize the chassis of the car. For this, wheels with off-road tires are installed. Some owners install bridges from military UAZ vehicles. They have a lower ratio and increase ground clearance.
Spare wheel holder
Off-road UAZ is equipped with a spare wheel bracket. Increased spare wheel does not fit in the place provided by the plant. The bracket is made from pipes or profiles.
The upper part of the bracket is attached to the roof rack of the vehicle. The lower part of the bracket is installed on the rear bumper.
Bridge breathers
When driving a UAZ 452 vehicle on water, water can enter the bridges through the breathers. Water penetration into the gearbox housing leads to increased friction between the parts of the mechanism. Due to increased friction, the unit may fail.
When driving off-road, car owners modernize the breathers of the axles. For this:
- Unscrew the breathing valve;
- A hose is installed at the attachment point of the breathing valve brake system Gazelle car;
- The second hose fitting is connected to a flexible rubber hose using an adapter;
- The adapter in the hose is clamped with a clamp;
- The second edge of the flexible hose is fixed in a place inaccessible to water (in the engine compartment);
When driving a car off-road, water does not enter the bridge through the breathing valve. The crankcase is vented to the atmosphere through a hose.
From the above, it follows that the modernization of the UAZ 452 vehicle can improve the technical performance of the vehicle. You can do the modernization yourself. This allows you to get a unique machine designed for specific purposes.
UAZ jeeps are very popular on the territory of our Motherland. Despite the fantastic level of cross-country ability and endurance, the UAZ has one, but a huge minus, low comfort. The UAZ 452/3303 series cars are difficult to operate. The owners of such cars do their best to upgrade their vehicles as best as possible, they constantly finish, finish and modify these models. So, this is not a plowed field for research, practice and accumulation of experience.
SUVs UAZ 452 are remarkable for their excellent cross-country ability and unique technical characteristics... This type of car is in itself, and there is nothing to compare it with.
"Loaf" is a car that the owners, despite its venerable age and high level of depreciation, do not want to be scrapped. As the saying goes, "the old horse does not spoil the furrow." UAZ cars are often sorted out from screw to screw, revive and tune. The list of alterations includes almost all nodes and important elements in the jeep.
UAZ loaf tuning: interior, body, engine, bridges, suspensions, doors, fenders and even a roof.
Our domestic manufacturer from Ulyanovsk did not think about creating comfortable conditions for the driver and passengers of the "loaf" and therefore the owners of these machines themselves have to finish what the designers were unable to create. The "UAZ" has another minus is its instability on the highway at high speed. Another drawback of the "loaf" is the instability on the road after a hundred kilometers, forcing motorists to strengthen the suspension and the angle of inclination of the wheels.
We tune the UAZ loaf with our own hands, what can be done with it:
- work on the suspension lift;
- put on the car more strong engine;
- tune lighting 4) change factory bridges to military ones;
- completely change the paint, experiment with airbrushing;
- make glass tinted; 7) replace the front and rear bumpers
- put a powerful kenguryatnik;
- install an additional winch;
- mount the roof rack;
- install on back door ladder;
- change wheels and put tires with large size and a better tread;
- insert into the structure such an element as a preheater.
Tuning of the salon uaz loaf
Being in a UAZ and sitting on factory seats, especially on a long journey, is not an easy test. When we talk about the UAZ loaf of interior tuning, we are first of all talking about replacing the seats. To remake "nurses" is a stupid business, it is much easier to "transplant" them from a foreign model, suitable in size for a "loaf".
But again in the cabin there is another oversight of little space in the front, respectively.
not all seats from foreign cars can fit. It is interesting that the seats from the Oka, VAZ 2109, and 41st Moskvich fit perfectly into the salon from Russian cars. Siduhi should be of medium width. If their width is exaggerated, they simply may not fit the interior in size. If the owner of the "loaf" is a hunter or a fisherman, then it makes sense to create comfortable sleeping places in the cabin. This cabin upgrade consists of installing a dining table.
A serious task is the organization of high-quality lighting, because the factory light does not climb into any gate.
Here again a minus. There are many built-in lighting devices inside the cabin and due to this, high consumption electricity. But, as you know, there are no exit situations, therefore, instead of ordinary bulbs, you need to screw in LED illuminators.
Advantages:
- much less electricity is consumed;
- the design of LEDs is much nicer than conventional flashlights;
- Such lamps burn brighter;
- They work much longer than standard luminaires. There is one unpleasant moment in the list of listed advantages, LED bulbs are much more expensive than standard lighting fixtures.
If they started talking about the shortcomings of the "loaf", it is necessary to note the very uncomfortable steering wheel of the car. We need to replace it. But again, the question of filling is difficult to pick up the steering wheel on the splines. There were attempts to attach the steering wheel from the "Gazelle", but it comes out too long and high. Domestic manufacturers produce adapted steering wheels for Oise. Their replacement does not require special skill and knowledge. It is possible to put the steering column in a steering system. It is difficult, but one hundred percent successful.
As for the dashboard, it is simple and inconspicuous. Its appearance can be improved by gluing a special decorative film. You can also try to replace it with the dashboard from the GAZ 3110 or mount the "gazelle version"
No one will argue with the statement that the UAZ car is very strong and inspiring confidence and calmness, but it rusts very quickly and strongly. And if corrosion has captured the body, then modernization is necessary and the use of welding is mandatory. After welding, the UAZ body is treated with a mixture of red lead and drying oil, there are other options. An important role in tuning is assigned to body kits, and it is needed not only for the external effect: the kenguryatnik and power bumper protect the body from impacts; roof rack makes it possible to remove some of the load from the car interior, and significantly increase the amount of cargo.
Parts of the body kit for external tuning for UAZ are purchased in specialized stores, one of the most popular are the parts produced by the RIF company. From the side front bumper you can place the winch. It will help solve many problems in areas of difficult roads.
Having visited the workshop of the 4x4 Tuning Center on a friendly visit, I found a 2010 UAZ-Loaf, which came for preventive maintenance. It became interesting to see what was done and how it behaves (whether it fell off or not :))
The loaf was built not at once, but gradually improving. Therefore, the total budget of improvements is difficult to calculate, but approximately at the time of 2016 it amounted to 1.6 million rubles.
Now the engine is being finalized (ZMZ 409): the task is to get away from the design with two belts and install a self-tensioning roller
And earlier, the engine was chipped to EURO 1, the catalyst was removed, the second lambda was turned off (somewhere around + 25% HP was added)
Installed ceiling auto-air conditioner AirCommand Sparrow.
It's electric. For normal power supply, it was necessary to replace the standard generator with a RIF 150A.
Despite the high consumption of electricity, in extreme heat, the air conditioner does not always cope with the task assigned to it.
To heat the cabin in the cold season, a Webast hair dryer is installed.
And in order to protect ourselves from energy starvation, we connected a second battery. She took a seat behind the back of the passenger seat, instead of the standard additional stove. The T-MAX controller controls the charge of two batteries.
By the way, about energy consumption: they have been looking for a long time why the battery is "landing" on a long parking lot. The culprit turned out to be trip computer Prestige. It was he who consumed the electricity. The developer has corrected this flaw and with the new firmware there is no energy theft.
Instead of a noisy, standard, second stove, a new, compact
She was placed under a folding table in the salon
Due to engine rework air filter carried to the salon. Now he lives under the seat.
The snorkel tube is visible on the right.
The salon is partially covered with aluminum.
The windows are closed with special, car, curtains
The curtains of the same plan are installed on the bulkhead of the passenger compartment in order to quickly warm up / cool the cabin in the absence of passengers.
Windows with vents are replaced with sliding ones, from Off-Road Window Solutions
The cabin has rails for securing cargo
Production of the legendary domestic car UAZ-452 was launched back in 1965. The Ulyanovsk Automobile Plant was tasked with creating the most reliable, durable car that could easily cope with all the obstacles in its path. The UAZ engineers coped with their task - a car outwardly similar to a "loaf" of bread was suitable for the tasks of escorting a tank column.
It is quite natural that at that time the main production forces and engineering ideas were aimed at creating the most simple, but extremely reliable car, therefore, the minimum amount of time was devoted to the comfort of the passenger compartment and the convenience of using the car. Many domestic motorists today prefer this personalized car, rather than modern foreign counterparts. There are actually several reasons for this: low price auto, reliability, ease of operation, unlimited possibility of manifestation of imagination for tuning the UAZ "Loaf" salon.
Tuning of the UAZ "Loaf" salon: what can be improved?
"Loaf" has always been highly valued among drivers and, even today, when automotive market a huge number of foreign SUVs, say goodbye to the brainchild Ulyanovsk Automobile Plant few are willing. The UAZ-452 is so simple in terms of design that everything in the car can be improved and modernized.
Today, many craftsmen not only tune the Loaf's interior with their own hands, but also improve the suspension, give the car additional stability. In general, they do everything to create the most convenient and suitable for traveling on.
What can be done with the UAZ Bukhanka salon:
- Replace native seats or sheathe them with foam rubber;
- Install a new steering wheel with electric or hydro-booster;
- Carry out thermal insulation;
- Install a hatch in the cabin;
- Put another one;
- Equip with additional equipment.
In general, everything can be changed and improved in the UAZ-452 cabin, the main thing is that there is enough imagination and money.
Replacing native seats
When it comes to the revision of the "Loaf" interior, the first thing most car owners complain about is the uncomfortable seats. And here a dilemma arises - to modify the native seats with foam rubber or to install new seats from another car. It is impossible to say unequivocally what is better.
On the one hand, it is easier to install new chairs and not waste time upgrading old ones. But there is not much free space in the passenger and driver's seat. It will not work to install any foreign-made seats. If we talk about Russian counterparts, then in the "Loaf" salon you can install seats from the "nine" or from the Moskvich-2141.
You can also borrow seats from the following foreign cars:
- Honda Civic;
- Toyota RAV4;
- Opel Astra;
- Passat B3.
It is important that the seats are not too high, otherwise it will be inconvenient to drive the car. If frequent hunting or fishing trips are planned at the "Bukhanka", then it will not be superfluous to organize comfortable sleeping places and a folding table in the salon. In the rear passenger compartment, it is desirable to replace the "native" lighting. There are a lot of salon lampshades; it will not be difficult to quickly plant any battery. The way out of this situation is as follows - replacing conventional bulbs with LED lights.
Installing a new steering wheel
The tuning of the UAZ "Loaf" salon is not complete without changing the steering wheel. Many car owners are not satisfied with their own "steering wheel". Hands quickly get tired of the standard steering wheel during long trips, so many owners, when tuning the UAZ-452 with their own hands, first of all replace this very component of comfortable driving. But this issue also has its own difficulties. The fact is that it is not so easy to choose a better quality steering wheel by the splines.
Photo of tuning salon from patriots domestic auto industry on the example of UAZ 452 Loaf
Most car owners opt for a Gazelle steering wheel, but without additional alteration it will be too high. As an alternative - the installation of a specially adapted steering wheel for the UAZ-452. Today, such devices can be found in almost every automotive store. If there is no special desire and opportunity to replace the steering wheel, then you can get by with a simple braid on the rim.
We carry out thermal insulation of the cabin
To maintain a comfortable temperature in the "Loaf" cabin, it is best to make thermal insulation during tuning. All the work does not take much time - it is enough to lay plywood, foam rubber and insulation with your hands. Expanded polystyrene can be used as insulation. It is quite easy and simple to lay in hard-to-reach places due to the flexibility of the material.
But this material has drawbacks - it is highly flammable and, during extreme heat, emits harmful substances. Therefore, the choice of this insulation depends solely on the purpose of the car and the climatic features of the region. In addition to expanded polystyrene, penofol is also common - expanded polyethylene with a layer of foil.
Installing a new dashboard and sunroof in the UAZ-452
Another drawback of "Loaf" is a primitive dashboard with a minimum of information. In order to somehow embellish the "tidy" and make it more attractive, car owners paste over it with a film. But what about uninformative devices? In this case, only self-tuning will help. There are only two solutions: installing a new panel, for example, with the GAZ-3110, or equipping the panel with additional equipment as much as possible.
You can install the following:
- Navigator.
- Video recorder.
- Sensor radio.
- Anti-radar.
You can equip the panel with a large number of different devices, there is plenty of space. Also, for a constant flow of fresh air into the "Loaf" salon, it will not be superfluous to organize a hatch. To do this, you need a welding machine, a drill, a grinder. The work is quite painstaking, but the result will exceed all expectations.
There are a lot of different variations of tuning the "Loaf" salon with your own hands. UAZ-452 is a fairly simple but unique car that gives the owner absolute freedom of action, which is limited only by his own imagination and money. You can even install an automatic sofa in the car salon, purchase DVDs and various modern devices that greatly simplify life and help pass the time, rest and relax after a long trip.
This utility vehicle is characterized by increased reliability, good off-road maneuverability and adaptability to extreme operation. But going out into nature is not the same as fishing or hunting, especially for a few days. For these purposes, the UAZ 452 itself, often referred to as a "loaf", and its interior are not quite suitable, first of all, in terms of practicality, convenience and comfort.
We will figure out how to competently tune the UAZ 452 "Loafs", what to take into account, change, modernize in its design so that it matches the local conditions and the specifics of its application as much as possible. And most importantly - what can be done on their own, and if with the involvement of professionals, then only for individual works.
Camouflage body color
Standard tinting options do not differ in variety. To “disguise” the UAZ 452 as much as possible, you only need to have a sprayer and a little paint on hand. Since camouflage is done depending on the season, and it has to be changed regularly, the cheapest composition is sufficient. In this case, the issues of layer reliability, coating durability and similar nuances are irrelevant.
Experienced fishermen and hunters advise to slightly strengthen the body before painting. Driving over rough terrain, in a rut, especially in poor visibility conditions - all this is fraught with numerous impacts on the lower part of the side of stones, tree roots, stumps, and so on. The gradual deformation of the metal will lead to its destruction, including as a result of progressive corrosion. Sheets of aluminum, fixed to the bottom of the "loaf" (by about half a meter) will cost much less than repairing it and completely repainting it.
Power bumper
These protective elements of the machine are attached to the front and rear. According to experts, they provide maximum safety when driving off-road. It will take a little - metal (sheet steel, channel or pipes, depending on the design) and polymer paint.
And all this can be done by yourself, without contacting a car service.
Protection on mirrors
The expediency of installing such grids is obvious. Any large branch - and you will have to change the glass or align the holder (and then if you can do it).
Winch
You definitely can't do without it. It is hardly worth hoping for someone's help far from settlements and roads. For UAZ 452, winches with a force of 4 tons or more are suitable, not less (taking into account the workload of the machine). A good option is a device from Comeupwinch (DV-9 series). Its reliability has been tested many times, and with proper installation, the mechanism will function reliably for decades.
Pay attention to the winch cable. It is desirable to replace the existing metal with Kevlar (for example, Amsteel Blue by the American company Samson or similar). It is lighter, stronger and safer to use.
Trunk
When going out into nature, a hunter and a fisherman need a lot. It will not work to load everything into the salon if there are people in it. What to do with tents, sleeping bags and the rest. The optimal solution is to place the UAZ 452 on the roof.
Lighting
Even if the factory complete set includes a turning headlight, then it will not be enough when going out into the countryside. One of the good solutions for additional lighting is to install a "loaf" on the roof led panel... For example, the "VisionX" modification of the X-Mitter (shown in the photo). It will provide good visibility for at least 250 m.
Or do it like this.
The bracket can be made from pipes, but it is not difficult to fix it.
Tuning of the UAZ 452 salon
Interior decoration
One of the budget options is to attach moisture-resistant plywood over the sheathing. It will slightly insulate the body of the "loaf" and improve the quality of its sound insulation. Other materials can be used at the request of the owner. For example, rolled foamed foam. The choice is great.
Backlight
It is advisable to install a couple of LED spotlights or one small panel on the ceiling, since the standard lighting will clearly not be enough.
Furnishings
A few examples will be enough to understand how you can improve the interior design of the UAZ 452.
The problem of storing dishes, various utensils, gadgets and other little things, which is indispensable for hunting and fishing, has been completely solved with such tuning. Naturally, it is better to make a folding table, the tabletop of which is attached to the wall during the movement of the "loaf".
Heater
Judging by the reviews of many hunters and fishermen, the installation of "Webasto" has proved to be quite good. With a power of 4 kW, it is enough to ensure a comfortable temperature in the passenger compartment even in winter. Although a home-made "potbelly stove" is a good solution to the problem.
It is desirable to zone the salon. In this case, the rear compartment can be used as a small luggage compartment... For example, hunters will be able to store weapons there, fishermen - their tackle.
It should be borne in mind that both fish and game are also smells that penetrate into the salon. To level them out, the rear compartment can be equipped like this.
Will not interfere in the UAZ 452 cabin and acoustic system, which is quite simple to mount.
The article discusses only some of the tuning options when preparing a "loaf" for fishing or hunting. It all depends on the capabilities of its owner and imagination. A number of other improvements can also be made.
- Replace the steering wheel with a smaller one, from passenger car... But you will definitely have to install a power steering.
- Move (for convenience) the driver's seat to the right, close to the engine compartment.
- Finish the cabin and interior with sheet aluminum, placing a soundproofing material under it. The issue of aesthetics is a separate topic, but the fact that cleaning will be much easier (and a lot of dust and dirt on fishing or hunting will be applied) is unambiguous.
- Upgrade the engine compartment hood. For example, like this.
The rework is extremely useful, especially when driving long distances.
There are also more complex options. For example, "raise" the car, at the same time replacing the rubber, thereby increasing the track.
Think, decide, do - and your UAZ 452 will become a real house on wheels for the hunter and fisherman.
