APPROVED

General manager
Surname I.O.________________

General Provisions

1.1. The car mechanic belongs to the category of workers.
1.2. A car mechanic is appointed and dismissed by the order of the general director on the proposal of the head of the technical center.
1.3. The car mechanic reports directly to the head of the technical center.
1.4. During the absence of a car mechanic, his rights and obligations are performed by a person appointed in accordance with the established procedure.
1.5. A person who has primary vocational or secondary vocational education, as well as at least one year of work experience, is appointed to the position of a car mechanic.
1.6. A car mechanic should know:
- rules for disassembly, troubleshooting and repair of parts, assemblies, assemblies and devices;
- device and principles of operation of the equipment being repaired, methods of restoring worn-out parts;
- technical conditions for testing, adjustment and acceptance of units, mechanisms and equipment after repair;
- the procedure for registration of acceptance documents;
- tolerances, fits and accuracy classes;
- device and methods of using special devices and measuring instruments.
- name and marking of metals, oils, fuels, brake fluid, detergents.
1.7. The car mechanic is guided in his activities:
- the Charter of the organization, the Internal Labor Regulations, other regulations of the company;
- orders and orders of the management;
- this job description.

Job responsibilities car mechanic

A car mechanic performs the following job duties:

2.1. Carries out diagnostics and preventive inspection of cars Vehicle.

2.8. Prepares acceptance documentation.

Car mechanic rights

A car mechanic has the right to:

3.1. Request and receive necessary materials and documents related to the activities of a car mechanic.
3.2. Inform the immediate supervisor about all deficiencies identified in the course of their activities and make proposals for their elimination.

Car mechanic's responsibility

The car mechanic is responsible for:

4.1. Failure to fulfill and / or untimely, negligent fulfillment of their duties.
4.2. Inaccurate information about the status of work.
4.2. Failure to comply with applicable instructions, orders and orders for the preservation of commercial secrets and confidential information.
4.3. Violation of the rules of internal labor regulations, labor discipline, safety regulations and fire safety.

JOB INSTRUCTIONS OF THE AUTOMOTIVE WORKSHOP 1 Tier

APPROVED

General manager
Surname I.O. ________________
"________"_____________ ____ G.

General Provisions

1.1. The car repair mechanic belongs to the category of workers.
1.2. A car repair mechanic is appointed to the position and dismissed by order d on the proposal of the head of the technical center.
1.3. The car repair mechanic reports directly to the head of the technical center.
1.4. During the absence of a car repair mechanic, his rights and obligations are transferred to another official, which is announced in the organization order.
1.5. A person who meets the following requirements is appointed to the position of a car repair mechanic: initial vocational or secondary vocational education, at least a year of work experience in the relevant field.
1.6. A car repair mechanic should know:
- rules for disassembly, troubleshooting and repair of parts, assemblies, assemblies and devices;
- device and principles of operation of the equipment being repaired, methods of restoring worn-out parts;
- technical conditions for testing, adjustment and acceptance of units, mechanisms and equipment after repair;
- tolerances, fits and accuracy classes;
- device and methods of using special devices and measuring instruments.
1.7. is guided in its activities by:
- legislative acts of the Russian Federation;
- the Charter of the organization, the Internal Labor Regulations, other regulations of the company;
- orders and orders of the management;
- this job description.

Job responsibilities of a car repair locksmith

A car repair mechanic performs the following job duties:
2.1. Carries out diagnostics and preventive examination vehicles.
2.2. Rejects parts after disassembly and washing, performs, if necessary, locksmith processing of parts, static balancing of parts and assemblies.
2.3. Performs work on disassembly, repair and assembly of units and mechanisms of vehicles in accordance with the technical specifications of the manufacturer and other guidelines for the organization of work.
2.4. Performs work on the installation, regulation and replacement of spare parts, units and equipment in accordance with the issued work order.
2.5. Eliminates defects and malfunctions identified during diagnostics in agreement with the site (shift) foreman.
2.6. Performs work using overalls and the required protective equipment, devices and fences, complies with safety and fire safety regulations.
2.7. Reports to the shift (section) foreman and the head of the technical center on the identified malfunctions of equipment and devices.

Rights

A car repair mechanic has the right to:
3.1. Inform the immediate supervisor about all deficiencies identified in the course of their activities and make proposals for their elimination.
3.2. Submit proposals for improving the work related to the responsibilities provided for in this instruction for the management's consideration.
3.3. Require the management of the enterprise to ensure organizational and technical conditions and registration established documents required for the performance of official duties.

Car mechanic's responsibility

Anna Safronova In her youth, Katerina Pogodina wanted to enter a university in the English department, but did not pass the competition. Today, she speaks three foreign languages and is a top manager at one of the largest international companies After failing with linguistic ...

Jack Zenger and Joseph Folkman It's no secret that emotions are contagious. For example, a study by James Fowler of the University of San Diego and Nicholas Christakis of Harvard showed that joy is passed from person to person. If your friend ...

Anastasia Mitkevich Persistence, curiosity, the ability to make new acquaintances are the qualities that helped Mary Ghukasyan build an enviable career. Forbes Woman, she spoke about the first steps in the profession and the principles of her work Mary Ghukasyan was born in Yerevan, in ...

Douglas Wilson The higher your position, the more difficult it is to understand what is really going on at the lower rungs of the corporate pyramid. Bad news - if you are told about it at all - is only presented to you in a favorable light. How to hear the truth about what is happening in everyone ...

Jacob Morgan When we talk about the ability to love your job or self-organization, we most often mean entry-level or intermediate-level professionals. But these skills continue to be relevant to senior executives as well. What aspects of their work are they ...

APPROVED
General manager
Surname I.O. ________________
"________"_____________ ____ G.

1. General Provisions

1.1. The locksmith-repairman belongs to the category of workers.
1.2. A locksmith-repairman is appointed and dismissed by the order of the General Director on the proposal of the Chief Engineer / Site Manager.
1.3. The locksmith-repairman reports directly to the chief engineer / site manager.
1.4. During the absence of the repairman, his rights and obligations are transferred to another official, which is announced in the order for the organization.
1.5. A person who meets the following requirements is appointed to the position of a mechanic-repairman: initial vocational or secondary vocational education, work experience in the relevant field for at least a year.
1.6. The locksmith-repairman should know:
- technological processes of manufacturing products;
- kinematic and electrical circuits serviced machines;
- device and rules for using complex control and measuring tools and devices;
- design features universal, special devices and other equipment;
- ways to install the tool;
- enterprise standards and methodological instructions for quality in the part related to its activities.
1.7. The locksmith-repairman is guided in his activities:
- legislative acts of the Russian Federation;
- the Charter of the organization, the Internal Labor Regulations, other regulations of the company;
- orders and orders of the management;
- this job description.

2. Job responsibilities of a mechanic-repairman

The locksmith-repairman performs the following job duties:
2.1. Repairs the equipment of the production site in a timely manner.
2.2. Conducts scheduled preventive maintenance (PPR) of equipment in accordance with the PPR schedule.
2.3. Identifies the causes of premature wear of equipment, takes measures to prevent and eliminate them.
2.4. Repairs technical equipment and carries out minor repairs of machine tool assemblies and mechanisms.
2.5. Keeps records of existing equipment (mandrels, fixtures, etc.) and orders spare parts on time.
2.6. Performs operations related to setting up machines.
2.7. It takes good care of the equipment and accessories and maintains it in working order and cleanliness, does not leave the operating equipment unattended.

3. Rights of a locksmith-repairman

The locksmith-repairman has the right:
3.1. Require the administration to ensure the rules of labor protection, safety and fire safety.
3.2. Require the provision of overalls in accordance with current regulations.
3.3. Submit proposals for improving the work related to the responsibilities provided for in this instruction for the management's consideration.

4. Responsibility of the repairman

The locksmith-repairman is responsible for:
4.1. For non-fulfillment and / or untimely, negligent fulfillment of their duties.
4.2. For non-compliance with the current instructions, orders and orders for the preservation of commercial secrets and confidential information.
4.3. For violation of the rules of internal labor regulations, labor discipline, safety regulations and fire safety.

If after reading this article you do not receive a definite answer, ask for quick help:

APPROVED
General manager
Surname I.O.________________
"________"_____________ ____ G.

1. General Provisions

The procedure for registration of acceptance documents;
- tolerances, fits and accuracy classes;
- device and methods of using special devices and measuring instruments.
- name and marking of metals, oils, fuels, brake fluid, detergents.
1.7. The car mechanic is guided in his activities:
- the Charter of the organization, the Internal Labor Regulations, other regulations of the company;
- orders and orders of the management;
- this job description.

2. Job responsibilities of a car mechanic

A car mechanic performs the following job duties:

2.1. Carries out diagnostics and preventive inspection of vehicles.
2.2. Rejects parts after disassembly and washing, performs, if necessary, locksmith processing of parts, static balancing of parts and assemblies.
2.3. Performs work on disassembly, repair and assembly of units and mechanisms of vehicles in accordance with the technical specifications of the manufacturer and other guidelines for the organization of work.
2.4. Performs work on the installation, regulation and replacement of spare parts, units and equipment in accordance with the issued work order.
2.5. Eliminates defects and malfunctions identified during diagnostics in agreement with the site (shift) foreman.
2.6. Performs work using overalls and the required protective equipment, devices and fences, complies with safety and fire safety regulations.
2.7. Reports to the shift (section) foreman and the head of the technical center on the identified malfunctions of equipment and devices.
2.8. Prepares acceptance documentation.

3. Rights of a car mechanic

A car mechanic has the right to:

3.1. Request and receive the necessary materials and documents related to the activities of the car mechanic.
3.2. Inform the immediate supervisor about all deficiencies identified in the course of their activities and make proposals for their elimination.
3.2. Submit proposals for improving the work related to the responsibilities provided for in this instruction for the management's consideration.
3.3. Require the management of the enterprise to provide organizational and technical conditions and the execution of the established documents necessary for the performance of official duties. (

4. Responsibility of a car mechanic

The car mechanic is responsible for:

Failure to fulfill and / or untimely, negligent fulfillment of their duties.
4.2. Inaccurate information about the status of work.
4.2. Failure to comply with applicable instructions, orders and orders for the preservation of commercial secrets and confidential information.
4.3. Violation of the rules of internal labor regulations, labor discipline, safety regulations and fire safety.

If after reading this article you do not receive a definite answer, ask for quick help:

Job description locksmith regulates labor relations. The document contains general provisions about the position, requirements for education, work experience, knowledge, the order of subordination, employment and dismissal of an employee from office, a list of his functional duties, rights, types of responsibility.

The instruction is developed by the head of the organization's division. The document is approved by the director of the organization.

The standard form provided below can be used when drawing up the job description of a mechanic, mechanic, toolmaker, car repair, etc. A number of provisions of the document may differ depending on the specialization of the employee.

І. General Provisions

1. The locksmith belongs to the category of "workers".

2. The locksmith is directly subordinate to the head of the department / general director of the organization.

3. Appointment and dismissal of a locksmith is made by order of the General Director.

4. A locksmith shall be appointed to a person who has at least a specialized secondary education and at least one year of experience in similar work.

5. During the absence of a locksmith, his rights, functional duties, responsibility are transferred to another official, as reported in the order for the organization.

6. A locksmith in his activities is guided by:

internal labor regulations;
this job description;
The charter of the company;
governing, normative acts of the organization;
orders, orders of the management;
orders of the immediate superior;
the legislation of the Russian Federation.

7. The locksmith should know:

operating principles, equipment arrangement, methods of restoration of worn-out structures;
the procedure for disassembling, repairing, assembling parts, installing units, assemblies, handling devices;
requirements for landings, tolerances, accuracy classes of parts;
time standards for work;
methods and conditions for the use of special, auxiliary equipment, measuring equipment;
consumption rates of materials, spare parts;
conditions for testing, adjusting, accepting mechanisms, assemblies, assemblies after service and repair;
handling rules, the appointment of mechanized tools.

II. Job duties of a locksmith

The locksmith performs the following job duties:

Typical job description for an auto mechanic and his key responsibilities

Sorts parts by performance criterion after disassembly, cleaning.

2. Processes units, parts, conducts their static balancing.

3. Carries out inspection, inspection, preventive inspection of parts and mechanisms.

4. Eliminates the established malfunctions, defects during the period of diagnostics by the decision of the immediate superior.

5. Collects, adjusts, replaces spare parts, components, assemblies, equipment in accordance with the received work order.

6. Informs the immediate supervisor about the identified malfunctions of parts, mechanisms and the necessary measures to eliminate them.

7. Disassembles, assembles, repairs units, equipment parts in accordance with the guidelines of the organization for the work.

8. Uses overalls, installed personal protective equipment during work.

9. Applies devices, devices in compliance with safety regulations and fire protection.

10. Determines the causes of increased wear, failure of parts and mechanisms.

11. Prepares documents for the provision of materials, spare parts, tools.

12. Maintains proper operation, timely inspection of parts and mechanisms.

13. Carefully spends and rationally uses entrusted tools and devices.

ІІІ. Rights

The locksmith has the right:

1. Do not start performing their functional duties when there is a danger to life and health.

2. Communicate with departments of the organization on work issues.

3. Participate in educational events, improve your qualifications.

4. To demand from the management of the organization the formation of normal conditions for safe work, the exercise of their powers.

5. Inform the management about the identified deficiencies in the organization's activities, send proposals for their elimination.

6. Consult with specialists on issues beyond the competence of a locksmith.

7. Receive information from managers about decisions regarding its activities.

8. Communicate proposals to the management to improve the organization's activities.

9. Independently make decisions within the limits of their competence.

IV. A responsibility

The locksmith is responsible for:

1. Improper performance of their duties.

3. Violation of the provisions of the governing documents of the organization.

4. The reliability of the information provided to the management about the functioning of mechanisms, equipment.

5. The results of independent decisions, their own actions.

6. Violation of safety standards, labor discipline, fire protection standards, internal labor regulations.

7. Causing damage to the organization, its employees, the state, clients.

A locksmith-repairman repairs, restores parts, mechanisms of equipment that is used for industrial, household, technical activities.

1. Scheduled preventive maintenance of equipment, in accordance with the established schedule.

2. Taking into account the current mandrel, devices.

3. Setting up machines.

4. Processing of units, parts according to the established qualifications (degrees of accuracy).

Job description of a car mechanic sample form. Job responsibilities of a car mechanic

Job descriptions

Open in WORD format

a common part.

A car repair locksmith belongs to the category of general-purpose workers who checks the technical condition of cars using diagnostic equipment and instruments, performs maintenance operations and repairs of vehicles.
The car repair mechanic obeys and receives orders, work orders directly from the head of the technical center, and is in operational subordination to the shift (section) foreman of the technical center.
Appointment and dismissal from it is made by order of the General Director of the enterprise on the proposal of the head of the technical center.
A car repair mechanic should know: rules for disassembly, troubleshooting and repair of parts, assemblies, assemblies and devices, safety rules; device operating principles of repaired equipment, methods of restoring worn parts; technical conditions for testing, adjustment and acceptance of units, mechanisms and equipment after repair; tolerances, fits and accuracy classes; device and methods of using special devices and measuring instruments

2. Functions and duties
2.1. A car repair mechanic must:

carry out diagnostics and preventive examination of vehicles, identifying defects;
reject parts after disassembly and washing, perform, if necessary, locksmith processing of parts, static balancing of parts and assemblies
to carry out work on disassembly, repair and assembly of units and mechanisms of vehicles in accordance with the technical specifications of the manufacturer and other guidelines for the organization of work;
carry out work on the installation, regulation and replacement of spare parts, units and equipment in accordance with the issued work order;
to eliminate the defects and malfunctions revealed during the diagnostics in agreement with the master of the section (shift);
ensure the quality of work, make the necessary adjustments to the methods and methods of adjustment;
keep the workplace and equipment clean, work using overalls and the required protective equipment, devices and fences;
participate in the implementation of progressive methods of repair and restoration of equipment, measures to increase the service life of equipment, reduce downtime, prevent accidents and industrial injuries;
know and follow the instructions for safety, fire safety, industrial sanitation during work;
report to the shift (section) foreman and the head of the technical center:
on the identified malfunctions of equipment, devices;
about each case of injury suffered personally or by other workers,
about persons who violate safety instructions, fire safety.
to participate in the provision of assistance to victims, in the elimination of the accident;
know the techniques of first aid;
know the location and be able to use fire extinguishing means.

3.Rights

Locksmith for car repair provided following rights:

get acquainted with the draft decisions of the management of the enterprise concerning its activities;
make suggestions for improving the work stipulated by this instruction.

4. Responsibility
4.1. The auto repairman is responsible

for improper performance or non-performance of the duties assigned to him, within the limits determined by the current labor legislation of the Russian Federation. violation of labor and production discipline, compliance with the rules and instructions for safety and industrial sanitation.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.

Instructions sent by:

Kairgeldin Aida
Head of HR department
LLC "Astex-M" Moscow

Job description of a car repair locksmith

Job descriptions

Job description of a car mechanic

Open in WORD format

1. a common part.

1.1. Full title of the position: Car mechanic.

1.2. This position is subordinate to and receives orders, working orders directly from the head of the motor transport department, and is in the operational subordination of the dispatcher-mechanic.

2. Functions

2.1. The executor of this position is entrusted with the fulfillment of the following functions:

Ensuring trouble-free and reliable operation of the company's vehicles, correct operation, timely repair, control of technical condition;

· Carrying out preventive maintenance works;

· Holding seasonal service cars;

· Carrying out preventive inspection of vehicles and equipment;

· Promptly take measures to eliminate breakdowns in the operation of vehicles;

· Participate in the installation and replacement of spare parts and equipment;

· Participate in the work on the introduction of progressive methods of repair and restoration of equipment, measures to increase the service life of equipment, reduce downtime, prevent accidents and industrial injuries;

· Knowledge and observance during work of instructions on safety measures, fire safety, industrial sanitation;

Report to the dispatcher-mechanic and the head of the motor transport department:

· About the identified malfunctions of vehicles, equipment, devices;

· About each case of injury, poisoning, burns, received personally or by other workers, as well as about fire, explosion or emergency;

· About persons committing violations of safety instructions, fire safety.

· Participate in providing assistance to victims, eliminating an accident, fire or other incident (calling an ambulance, fire department); know the techniques of first aid; know the location and be able to use fire extinguishing means; know, skillfully and quickly perform the duties stipulated by the accident elimination plan in various emergency situations.

3.Rights

3.1. For high-quality and timely performance of duties, the Executor of this position is granted the following rights:

· Make suggestions for improving the work provided for by this instruction.

4. Responsibility

4.1. The petrol station car mechanic is responsible for non-fulfillment of the duties assigned to him, violation of labor and production discipline, observance of rules and instructions on safety and industrial sanitation.

Articles >> Professions >> Profession auto mechanic

Car mechanic profession

Description of the profession of an auto mechanic

The profession of an auto mechanic has been and remains in demand. All kinds of moving technical means are becoming more and more, and in terms of their design, they are becoming more complicated and improved every day. Any mechanism always needs proper maintenance. Well trained and skilled workers can do this.

An auto mechanic is a car mechanic who performs both vehicle maintenance and subsequent repairs. It is this multidisciplinary specialist who monitors technical condition different types motor transport equipment. For the work of an auto mechanic, devices and sophisticated equipment are needed, with the help of which any kind of defects are diagnosed and eliminated. These include auto scanners and dynamometers.

The job of an auto mechanic is as follows:

preliminary examination and complete diagnosis;
performance of quality Maintenance cars;
elimination of malfunctions in the units and assemblies of the vehicle;
regulation of various machine mechanisms;
car tuning, repair of a restoring or cosmetic nature, replacement of faulty elements and unusable parts;
maintenance of documentation for all calculations and registration of guarantee papers.

A well-performed work of an auto mechanic can significantly reduce the risk of accidents, thereby ensuring the safety of the driver and his passengers. And in order to become a specialist in this area, you need to acquire certain professional skills:

be able to identify the cause of any defect and malfunction of the machine;
navigate in all kinds fuels and lubricants and fuel;
be able to handle different kinds hand tools, diagnostic and repair equipment;
have knowledge of the principles and devices of operation of vehicles of all kinds and models;
undeniable is the fact that any car service specialist must be able to drive a car.

The profession of an auto mechanic is associated with certain risks. The disadvantages of this activity include injuries such as fractures, bruises, cuts, muscle sprains, blurred vision, etc. A strong vibrations and noises from tools and motors in operation are detrimental not only to hearing, but also to health in general. In addition, in their practice, auto mechanics often deal with chemicals. Therefore, people with allergies should not engage in this type of activity.

Since the volume of work in auto repair shops is huge, it is not possible for one specialist to cope alone. That is why in large auto centers there is a differentiation by specialization:

auto electricians. Their responsibility includes the elimination of any problems in the electronics;
car drivers. They are responsible for straightening the body and putting it on. Thus, the car is prepared for painting work;
painters. They are responsible for the final sanding and painting of the car;
diagnostician mechanics. These specialists diagnose the vehicle and identify the cause of the breakdown.

Personal qualities of an auto mechanic

The profession of an auto mechanic is very difficult. It is not enough to have excellent hearing, well-developed visual-figurative thinking, observation, ability to concentrate and excellent memory. In addition, you need to be sturdy and in good physical shape. Specialists in car repair shops have to withstand considerable loads, because many parts of the car are quite heavy. That is why there is no place for women in the work of an auto mechanic.

It is very important to be disciplined, patient and orderly. Some situations in the practice of an auto mechanic require him to react quickly and be able to impeccably and unquestioningly fulfill all the requirements of managers. It is worth remembering that the lives of people can depend on the care, painstaking and sometimes corrosiveness of the master.

It is also necessary to be a sociable person, to be able to calmly communicate with clients, colleagues and management, to make compromises - all this will significantly improve the quality of the auto mechanic's work.

Job description of a car mechanic

After all, the reputation of any enterprise is based, first of all, on the well-functioning activities of the entire team as a whole.

Car locksmiths are often stressed and stressed. That is why people suffering from diseases of the heart, respiratory, nervous systems are unlikely to be hired for such work. Also, a person with visual impairments and hearing aids should not study to be an auto mechanic.

Education (What you need to know?)

Currently, various educational institutions are operating, which train their students in the profession of an auto mechanic. The vocational schools train specialists to work at the service station, in the technical school you can learn to be a car mechanic. Mechanical engineers receive higher technical education.

Those wishing to acquire basic knowledge of the work of an auto mechanic can attend training courses. A beginner specialist in this profile will get a job in a small car service with a small salary. Large organizations prefer to hire car mechanics with higher education, where the salary will meet the requirements.

Place of work and career

Auto mechanics work at service stations. In small car services, you can often find a universal master. Specialists of a narrower profile work in large auto centers.

Not a single industrial and agricultural enterprise can do without a car mechanic. The auto mechanic will also be provided with work at motor depots, bus fleets and taxi companies. High-level specialists are required not only in car services, but also in sports.

Those who wish to succeed in the profession of an auto mechanic need to constantly work on themselves, deepening and improving their knowledge, and improve their qualifications. In the modern world, technology is developing quite rapidly. And in order to always remain in demand in this type of activity, to earn an excellent reputation, it is necessary to discover something new for oneself in work every day, gaining invaluable experience. It is not enough just to master this profession by graduating from an educational institution.

The career growth of any car mechanic depends on the firm or organization in which he will directly work. The more professional the skills of a locksmith, the higher his salary. And high-quality work will attract more new customers.

Over time, a versatile and experienced auto mechanic may well engage in private activities, opening his own car service. In the future, it will be possible to create new jobs by hiring other professionals in this field. There are more and more cars with complex devices on the roads, and it is more and more difficult to find a good master.

In any case, not a single experienced auto mechanic has been left without a livelihood. A good specialist, even of retirement age, will always be able to feed himself and his family.

Back | To main

The job description of a locksmith regulates labor relations. The document contains general provisions on the position, requirements for education, work experience, knowledge, the order of subordination, employment and dismissal of an employee from office, a list of his functional duties, rights, types of responsibility.