Oil change in Datsun on-Do and mi-Do engines
How to check the engine oil level Datsun on-Do and mi-do?
Checking the oil level must be carried out with the obligatory observance of 2 main criteria:
- One hundred percent cool engine;
- Horizontal surface for cars.
When pulling out the On-Do dipstick, the engine oil level should fluctuate between the MIN and MAX marks marked on the dipstick.
If you need to add oil
Oil consumption while the engine is running is common. The amount of oil consumption depends on the driving style, engine load and engine speed. crankshaft... During the break-in period of the car, an overestimated oil consumption may be observed.
That is why it is fundamentally important to inspect the oil level in the engine frequently, especially before long trips.
If the oil level in the engine is below the permissible level (below the min mark) or at the lowest point of the permissible one, you need to add oil to the mi-Do filler neck in small portions so as not to overdo it.
Then you should wait up to 5 minutes for the oil to completely drain to the crankcase. Then you can measure the level again, but the dipstick must be inserted all the way. It is impossible for the oil level to exceed the permissible norm - the max mark on the dipstick. This causes it to enter the Datsun combustion chamber through the ventilation system and be vented to the atmosphere, which could result in catalytic converter malfunction. In the most best case you will get a blowout of excess grease through the cover gaskets.
What kind of oil to pour into engine Datsun on-Do and Mi-Do?
Tips for purchasing this component for Datsun on-Do are in the instruction manual. You need to focus on the viscosity characteristics - the manual says that the desired oil is 5W-30. But in its absence, you can choose a different composition. All types of acceptable oils depend on the temperature in which the Datsun on-Do is used:
Table of the prescribed viscosity of engine oils for Datsun engines.
Read the same
Some drivers immediately run over to semi-synthetics, but the official stations still recommend synthetic oil.
OJSC "Joint-stock oil company Bashneft, Ufa
JSC Novokuibyshevsk Oils and Additives Plant ", Novokuibyshevsk
JSC Angarsk Petrochemical Company ", Angarsk
LLC TNK lubricants-, Ryazan
OAO Tatneft-Nizhnekamsk-neftekhim-Oil, Nizhnekamsk
JSC Tatneft -Nizhnekamsk -neftekhim-Oil ", Nizhnekamsk
LLC "Gazpromneft-Lubricants", "Omsk Oil Refinery" - Omsk
OOO Gazpromneft-Lubricants, Omsk Oil Refinery, Omsk
Hanval INC. Korea
Shell East Europe Co, England
Shell East Europe Co.
How many liters of oil do I need to buy for replacement?
Read the same
After installing the drain plug, oil filter and the dipstick in place, it is required to fill in oil in the following volume:
- 2.7 liters - if the change is carried out without dismantling the oil filter;
- 2.9 liters - with an oil filter change;
- 3.2 liters - dry fill.
How to change the engine oil. As easy as pie
Changing the engine oil - For Dummies from Auto overhaul How to change the engine oil
Contacts for cooperation (sponsors, advertising offers): Mail: [email protected] I'm on Vkontakte.
This is the data for Datsun on-Do with mechanical transmission. For engines with automatic transmission, the figures will be 3.9 liters, 4.1 liters and 4.4 liters, respectively.
How change oil in the Datsun engine yourself?
You can make a replacement at a service station, but this operation is simple, and there they will take a considerable amount for it (with the exception of oil change centers, where they change it for free when buying oil). So it won't be superfluous to know how to change the oil yourself.
When and at what interval does the oil in a Datsun engine change?
According to Datsun regulations, the replacement is done every 15,000 km, but the first maintenance must be done after 2,000 km, after which the specified interval must be adhered to.
On the other hand, many believe that the oil change every 15,000 km is unreasonably long and the interval should be shortened. This is justified by the style of movement, especially in metropolitan areas, where cars sit in congestion for a long time. Also, a discount is made for the climatic conditions of Russia - frost, hot weather, humidity, etc. Thus, movement in the middle climatic zone, with mild winter and not too hot summer months, implies a replacement every 10,000 km, and driving on Datsun on-Do in more severe conditions - every 7,000-8,000 km.
In addition, it is worth remembering that changing the oil also means installing a new oil filter.
Instructions for changing the oil in the Datsun on-Do and Mi-Do engine
Initially, you need to prepare for the procedure:
- Warm up the car, as the oil is drained only when it is not in operation, but hot. power unit;
- Next, Datsun is driven onto an overpass or, if there is none, on some props (you can use a jack);
- In the presence of metal or plastic protection the crankcase must be dismantled;
- It is necessary to prepare a container for the drained oil - at least 4 liters in volume.
- First of all, the drain plug is unscrewed using the "17" key;
Unscrewing the drain plug.
- Waste oil will begin to flow through the drain hole, under which it is necessary to place a container prepared in advance. It is required to work carefully, since the oil is hot;
- It takes more than 10 minutes to drain. But to speed up the process, it is recommended to unscrew the oil filler plug, and also pull out the dipstick;
- After all the oil is drained, you need to screw the plug back. The plug itself at Datsun has a conical shape, due to which it does not need other seals. But it is necessary to tighten it with moderate effort so as not to damage it, and in the future there will be no problems with twisting.
Replacing the oil filter
Read the same
It is carried out only after draining the used oil from the Datsun on-Do engine. This element is located in the area of the engine shield, which is in the rear area of the power unit. It is required to arm yourself with an appropriate puller.
Using a puller to remove the filter.
Alternatively, you can use a regular strap by wrapping it around the filter housing.
Location of the oil filter.
After dismantling the old Datsun on-Do filter, the seat on the engine must be thoroughly cleaned of the remnants of the old gasket, and the new filter must be lubricated with engine oil before installation. Further, it is screwed in until the contact between its O-ring and the cylinder block occurs.
New oil filter.
What to do if the oil level is above the MAX mark?
In this case, we recommend draining the excess butter to avoid oil entering the combustion chamber. Standard methods (through the withdrawal oil filter) it will not be possible to remove excess oil, since in this case it is difficult to control the level of the leaked oil, moreover, you can spoil it when you unscrew it.
How to remove excess oil? We recommend the original idea of using medical devices and instruments, namely: What engine for Renault Duster 1.6 Renault Duster is a crossover that is sold on Russian market under the French brand. It is produced at car factories in Romania, Brazil, Colombia and Russia. Even India is about to make the creation of this jeep. The brainchild of the French car industry has concentrated in its abilities the best properties for our client ...
Replacing engine oil in Datsun engines is no different from that for Lada Grant engines. Therefore, it is not difficult to do everything yourself.How to check oil level in Datsun On-Do and Mi-Do engines?
Checking the oil level must be carried out with strict observance of 2 main conditions:
- Completely cold engine;
- Horizontal surface for cars.
When pulling out the On-To dipstick, the engine oil level should fluctuate between the MIN and MAX marks marked on the dipstick.
Min and Max marks on the dipstick.
If you need to add oil ...
It is normal to consume oil while the engine is running. The amount of oil consumption depends on the driving style, engine load and engine speed. During the break-in period of the vehicle, there may be increased consumption oils.
This is why it is important to check the engine oil level regularly, especially before long journeys.
If the oil level in the engine is below the permissible level (below the min mark) or at the lowest point of the permissible one, it is necessary to add oil to the mi-Do filler neck in small portions so as not to overdo it.
Adding oil to the engine.
Then it is worth waiting up to 5 minutes for the whole oil to flow to the crankcase. After that, you can measure the level again, but the dipstick must be inserted all the way. It is impossible for the oil level to exceed the permissible norm - the max mark on the dipstick. This causes it to enter the Datsun combustion chamber through the ventilation system and be vented to the atmosphere, which could result in catalytic converter malfunction. In the best case scenario, you will get excess grease spurting out through the cover gaskets.
What kind of oil to fill in the Datsun On-Do and Mi-Do engine?
Recommendations for purchasing this component for Datsun on-Do are in the instruction manual. In this case, it is necessary to focus on the viscosity indicators - it is written in the manual that oil with the 5W-30 index is preferable. But in its absence, you can choose another composition. All types of permitted oils depend on the temperature in which the Datsun on-Do is used:
Table of the prescribed viscosity of engine oils for Datsun engines.
Some drivers immediately switch to semi-synthetics, but synthetic oil is still recommended by official stations.
| SAE viscosity grade |
Manufacturer |
|
| LUKOIL LUX | 5W-30.5W-40 10W-40, 15W-40 |
OJSC -Lukoil- |
| NEWOIL SUPER | 5W-30, 5W-40 I0W-30, 10W-40 15W-30, 15W-40 20W-40, 20W-50 |
OJSC "Joint-stock oil company" Bashneft ", Ufa |
| ROSNEFT MAXIMUM | 5W-40, 10W-40 |
JSC "Novokuibyshevsk Oils and Additives Plant", Novokuibyshevsk |
| ROSNEFT MAXIMUM | 5W-40, 10W-40 | |
| ROSNEFT PREMIUM | 5W-40 |
JSC Angarsk Petrochemical Company ", Angarsk |
| TNK MAGNUM SUPER | 5W-30. 5W-4010W-40,15W-4015W-50 |
LLC TNK lubricants-, Ryazan |
| TATNEFT SYNTHETIC | OW-40, 5W-30 5W-40 |
OAO Tatneft-Nizhnekamsk-neftekhim-Oil, Nizhnekamsk |
| TATNEFT ULTRA OPTIMA | 5W-30, 5W-40 10W-40 |
JSC Tatneft -Nizhnekamsk -neftekhim-Oil ", Nizhnekamsk |
| EXTRA | 5W-30. 10W-40 15W-40 |
LLC "Gazpromneft-Lubricants", "Omsk Oil Refinery" - Omsk |
| G-ENERGYS SYNTH | 10W-40. 15W-40 |
OOO Gazpromneft-SM- |
| SIBIMOTOR SUPER (LUX) | 10W-40. 15W-40 |
OOO Gazpromneft-Lubricants, Omsk Oil Refinery, Omsk |
| ESSO ULTRA | 10W-40 |
Exxon-Mobil, Germany |
| GT TURBO SM | 10W-40 |
Hanval INC. Korea |
| MOBIL 1 ESP FORMULA | 5W-30 |
Exxon-Mobil, Germany |
| MOBIL 1 NEW LIFE MOBIL 1 PEAK LIFE MOBILSUPER 2000 XI MOBIL SUPER 3000 X1 | 0W-40 5W-50 10W-40 5W-40 |
Exxon-Mobil, Germany |
| SHELL HELIX PLUSSHELL HELIX PLUS EXTRA SHELL HELIX ULTRA | 10W-405W-405W-40 |
Shell East Europe Co, UK |
| SHELL HELIX HX7SHELL HELIX HX8 | 5W-4010W-40 5W-40 |
Shell East Europe Co. United Kingdom |
How many liters of oil do I need to buy for replacement?
After installing the drain plug, oil filter and dipstick in place, you need to fill in the following amount of oil:
- 2.7 liters - if the replacement is carried out without dismantling the oil filter;
- 2.9 liters - with the replacement of the oil filter;
- 3.2 liters - dry fill.
This data is for Datsun on-Do with manual transmission. For engines with automatic transmission, the figures will be 3.9 liters, 4.1 liters and 4.4 liters, respectively.
How to change the oil in a Datsun engine yourself?
You can make a replacement at a service station, but this operation is simple, and there they will take a considerable amount for it (with the exception of oil change centers, where they change it for free when buying oil). So it won't be superfluous to know how to change the oil yourself.
When and at what interval does the oil in a Datsun engine change?
Datsun mandates a replacement every 15,000 km, but it is necessary to walk after 2,000 km and then adhere to the specified interval.
On the other hand, many believe that the oil change every 15,000 km is unreasonably long and the interval should be shortened. This is justified by the style of movement, especially in metropolitan areas, where cars sit in congestion for a long time. Also, a discount is made on the climatic conditions of Russia - frost, hot weather, humidity, etc. Thus, moving in the middle climatic zone, with mild winters and not too hot summer months, implies replacing every 10,000 km, and driving a Datsun on -Do in more severe conditions - every 7,000 - 8,000 km.
In addition, it is worth remembering that changing the oil also means installing a new oil filter.
Instructions for changing the oil in the Datsun on-Do and Mi-Do engine
Initially, you need to prepare for the procedure:
- Warm up the car, since the oil is drained only on an idle but hot power unit;
- Next, Datsun is driven onto an overpass or, if there is none, on some props (you can use a jack);
- If there is metal or plastic, it must be dismantled;
- It is necessary to prepare a container for the drained oil - at least 4 liters in volume.
- First of all, the drain plug is unscrewed using the "17" key;
Unscrewing the drain plug.
- Waste oil will begin to flow through the drain hole, under which it is necessary to place a container prepared in advance. It is required to work carefully, since the oil is hot;
- It takes more than 10 minutes to drain. But to speed up the process, it is recommended to unscrew the oil filler plug, and also pull out the dipstick;
- After all the oil is drained, you need to screw the plug back. The plug itself at Datsun has a conical shape, due to which it does not need other seals. But it is necessary to tighten it with moderate effort so as not to damage it, and in the future there will be no problems with twisting.
Replacing the oil filter
It is carried out only after draining the used oil from the Datsun on-Do engine. This element is located in the area of the engine shield, which is in the rear area of the power unit. It is required to arm yourself with an appropriate puller.
Using a puller to remove the filter.
Alternatively, you can use a regular strap by wrapping it around the filter housing.
Location of the oil filter.
After dismantling the old Datsun on-Do filter, the seat on the engine must be thoroughly cleaned of the remnants of the old gasket, and the new filter must be lubricated with engine oil before installation. Further, it is screwed in until the contact between its O-ring and the cylinder block occurs.
New oil filter.
What to do if the oil level is above the MAX mark?
In this case, we recommend draining the excess oil to avoid oil entering the combustion chamber. It will not be possible to remove excess oil by standard methods (by removing the oil filter), since in this case it is difficult to control the level of the leaked oil, moreover, you can ruin the oil filter when you unscrew it.
- 50 ml syringe (or more);
- System;
- An unnecessary bottle or container to drain excess oil.
We install the syringe into the hoses of the system, after cutting off the excess elements so that only the hose itself is up to 1 meter long. We suck it into the syringe through the neck from where the oil is poured several times until the level returns to normal.
Oil change video
You can more clearly see the process of changing the oil in this video. It shows the procedure for replacing engine oil in the Lada Granta power unit, since this model and Datsun on-Do have the same motors.
The Datsun on-Do is a compact entry-level vehicle based on Russian model Lada granta... The car has been produced since 2014. The eponymous hatchback, also available as a sedan, has received an updated exterior front and rear. The interior design has also undergone modernization, and this primarily concerns the front panel. "Datsun on-Do" is equipped with improved electric power steering, modified shock absorbers, more powerful brakes and high-quality noise insulation. The gearbox has been changed gear ratios... Initially, the model was sold only with a manual transmission, and in 2016 sales began with an automatic transmission. At that time, a version with an 82 hp engine left the conveyor. with.
In 2017, Datsun On-DO became available with a VAZ-21127 engine with 16 valves. The basic cost of the sedan is 480 thousand rubles for the version with a 1.6-liter engine (87 hp). The minimum cost of the version with a more powerful 1.6 liter engine (106 hp) is 552 thousand rubles. The multimedia system is available starting from the execution costing 563 thousand rubles. The most top-end Datsun on-Do equipment will cost 588 thousand rubles. This is a version with rear power windows, alarm and alloy wheels... Datsun on-DO has always been more expensive than platform Lada Kalina, but at the same time surpassed her in ride quality, build quality and comfort level. However, after the release of the updated Lada Kalina / Granta (in the style Lada Vesta) the model from the Datsun company quickly lost all its advantages.
How much engine oil is needed for Datsun on-Do
Year of release - from 2014
- Engine oil 1.6 - 3.2 liters.
Which engine oil is suitable for Datsun on-Do
Year of release - from 2014
- Engine Oil 1.6 - Nissan 5W-30, SAE 5W-40, Mobil 1, Motul
The Datsun on-Do budget sedan was created by Nissan on the Lada Granta platform. The model has been produced since the end of 2014 at AvtoVAZ. The cars are equipped with 1.6-liter atmospheric gasoline 8-valve engines VAZ 11183-50 and 11186 with 82 and 87 hp. respectively, 5-speed mechanical transmissions or 4-speed automatic machines.
What oil to use in your Datsun on-Do engine is indicated in the operating instructions. Datsun Genuine Oils, developed by ELF in cooperation with the automaker, provide a high level of performance characteristics and reliable operation of the car for a long time.
Original DATSUN 5W40 engine oil
Synthetic technology original Datsun 5W40 oil with ACEA A3 / B4 and API SL / CF performance level is recommended as engine oil for Datsun on-Do with 1.6 engine. It guarantees excellent protection of the engine against wear and exceptional cleanliness of its parts in all operating modes, including when driving in the city, on the highway, during sports and high-speed driving. The oil's resistance to temperature changes ensures its effectiveness at extremely high temperatures and prolongs engine life with frequent use under high load conditions. The low temperature fluidity of Datsun 5W40 oil facilitates cold starting of the engine, and the oxidation stability maintains the level of its performance throughout the entire service interval.
Original DATSUN 10W40 engine oil
Datsun 10W40 semi-synthetic engine oil meets international quality standards API SN / CF and ACEA A3 / B4. ELF experts recommend this oil for Datsun on-Do, which are used both in normal and difficult conditions for the engine: it provides a high level of protection of the engine from wear in all driving modes, therefore, increases its resource. Detergents and dispersants in the composition original oil Datsun 10W40 prevents deposits from forming on its parts and keeps them clean. Antioxidant properties and high thermal stability allow this oil to be used in Datsun on-Do engines with the maximum drain intervals prescribed by the automaker.
