Wheel sizes for different modifications of the Nissan car. Tires and wheels for Nissan Almera, wheel size for Nissan Almera Factory size tires for Nissan Almera n16

Choosing wheels for the Nissan Almera will not be difficult. You need to know the main parameters of the tire indicated on its sidewall. The rims must also match the selected Almera tires and hub. Razorovka, and the diameter of the central hole - the main parameters of the disc. Drilling is a way to make holes, not a characteristic

Knowing these dimensions, it is easy to find wheels. In the material you will find the tightening force of the nuts, the inflation pressure of the Nissan Almera wheels.

Almera N15 on disks

Nissan Almera generation N15 1995-2000 - has a number of the same parameters of disks, tires for gasoline hatchbacks, sedans 1.4 and 1.6 liters with a capacity of 87, 99 hp. respectively, as well as with diesel engines 2.0 l with 75 hp

Unchanged values:

• center hole diameter -59.1 mm
• fastener type - Nut
• tightening torque: 98 - 118 Nm
• fastener size -M12 x 1.25
• tire pressure - 2.1-2.3 kg / cm²
• fastening torque - 98-118 N / m.

Almera N15 tire size range:

• diameter in inches - 13-15.
• width in mm -175 - 195
• profile (%): 55 - 70.

The smallest tires are 175 / 70R13 and 195 / 55R15 are the largest.

Wheels for Almera N15:

• bolt pattern or drilling -4x100
• diameter in inches - 13-15
• width in inches -5-6
• offset ET in mm - 35-40.

Tires, wheels for Almera N16

Some of the sizes of Almera N16 wheels are the same. The same for everyone will be:

• DIA - center hole diameter 6 6.1 mm
• fastening the nut and the size of the fastening pins of the hub - М12х1.25
• tightening torque of nuts - 98Nm
• tire pressure - 2.1-2.3 bar
• PCD (bolt pattern) - 4 × 114, .3.

Almera N16 on disks

Tire size range:

• diameter -14.0 - 17.0
• width in mm - 175 - 215
• tire profile (%): 45 - 75.

The marking of the smallest tire for Almera N16 is 175 / 75R14, and the largest is 215 / 45R17.

• diameter in inches - 14 - 17
• width in inches - 5 - 7
• departure ET - 35−45 mm.

Almera Classic wheel specifications

Almera Classic on discs

Bolt pattern (PCD), center hole diameter (DIA), fastener dimensions are the same as for Almera N16.

The tightening torque of the nuts is 90 Nm, the pumping pressure is 2-2.2 bar, the offset ET is in the range of 35-40 mm.

Sizes of tires and wheels Almera Classic 2006-2012:

• 175 / 70R14 88H - 5Jx14ET35 ET 24-45
• 185 / 65R15 88H - 6Jx15ET40
• 185 / 70R14 - 5.5Jx15ET35 and 6J15ET35
• 195 / 60R15 - 6Jx15ET40
• 205 / 50R16 - 6.5Jx16ET40
• 205 / 50R16 -7J x16ET35

Almera G15 wheel parameters

Common parameters:

• bolt pattern −4 x 100
• center hole diameter (DIA) -60.1 mm
• pressure - 2.0-2.2 (compare with the manual)
• mount - M 12 x 1.25
• departure ET - 40

Almera G15 on disks

Tire and rim sizes:

• 175 / 70R14 - 5.5J14ET40
• 185 / 65R15 - 5.56J15ET40

Almera Tino Tire and Rim Sizes

Almera Tino bolt pattern (PCD) - 5x114.3, diameter of the central hole (DIA) - 66.1 mm, fastening nut - thread of studs M12x1.25, tightening torque -100 Nm.

Almera Tino on disks

Tire marking:

• diameter in inches - 15, 16 and 17,
• profile width in mm - 185, 195, 205, 225
• profile height in% - 45 - 65.

Details about bolt pattern (drilling) and other characteristics of wheels and tires

Ramping is indicated by PCD - the number of holes for the hub studs and the diameter of the circle of the mounting centers.

Disc characteristics

Center hole diameter - DIA. Must match the size of the hub.

Wheel offset ET is the distance between the central axis of symmetry and the plane of the mounting surface of the attachment.

Decoding of the 6.5Jx16 ET45 disc marking:

• 6.5 - landing width of the rim in inches, multiply by 2.54 to convert to millimeters
• J - configuration or shape
• X - X factor, casting, stamping
• 16 - landing diameter
• ET45 - positive wheel overhang of 45 mm.

Summer tires do not have a seasonal designation. A winter tire is marked with M + S, a snowflake symbol or the word Winter is applied. All-season tires are marked as a winter tire, but sometimes the inscription is applied: AS, R + W, AW. On the sidewall of the tire, a four-digit number will indicate the year of manufacture - 0418 means: 04 - the number of weeks (January), 18 - 2018.

Decoding of tire marking 205/65 R16 94S:

• 205 - profile width in mm
• 65 - profile height as a percentage of the width
• R - radial tire
• 16 - landing diameter in inches
• 94 - load index
• S - speed index.

Good disc manufacturers

Russian companies:

• K&K - joint production, letters - abbreviated names of the companies: KraMZ Russia and Komos Germany.
• IFree - releases alloy wheels, are of excellent quality and low price, available for cars of foreign and Russian brands.
• NeoWhell - production at the AzovTek plant, founded by an Indian corporation. The product is certified according to international ISO standards.
• Skad - based in Russia. The quality is beyond question, the products are supplied for Ford, Volkswagen.

The best foreign manufacturers:

• OZ Group, Momo - Italian brands.
• NS is an Asian manufacturer. Delivers ISO certified products. Covers a wide range of models.
• Nitro, Replica - presenters Chinese manufacturers, the largest disc suppliers in the Asian region. They are in demand. They cover standard sizes of models of machines produced for the world market.
• Aez is a German holding company ALCAR. Provides cast, stamped, forged and two-piece road rollers with chrome and lacquer finish.

Producers of good and not expensive tires

Sava tires are manufactured in various factories in Europe. the company specializes in the production of not expensive summer and winter tires for cars.

Tire dimensions

Selection of tires and wheels for a car Nissan almera 1.8i II (N16) 2005 reduces the risk of problems due to mistakes made by car owners when choosing them on their own. As a rule, this is due to the lack of relevant knowledge about a number of parameters that must be taken into account. It is for this reason that when installing tires and wheel rims various difficulties arise, and in addition, very many suspension and steering components are subjected to increased stress. The Mosavtoshina online store uses an automated system for the selection of rims and tires, the work of which is based on a special database. It contains various technical information about the vast majority of modern passenger cars and trucks... All its many advantages will become available after the user specifies the make, model, year of manufacture and modification of his vehicle.

Forums are full of information on the selection of tires and wheels on new car Nissan Almera 2013. It is the misunderstanding with the size that is controversial. We decided to clarify this issue. So, rubber Amtel standard size 185/65/15 is a budget option, inexpensive, but, frankly, not great. Delivered to the conveyor only because of Largus in order to unify production.

Taking into account the protrusions in the rear arch, you can forget about the 215, although there are options, including the R17.

Rubber size 195/65/15 can be safely installed as it is one of the most common sizes. Initially, the Bluebird car - the Japanese prototype of the 2013 Nissan Almera - was delivered as standard once with this size; the wing arches are similar.

The most interesting option is considered 205/55/16. This size can also be recommended. It is the most widespread in the world, however, it should be borne in mind that it will be possible to buy car disks with a dimension of 7.0 JJ PCD 4X100 DIA 60.1 ET 43 and less - up to a minimum departure of ET 38. If the dimension is even smaller, there will be a danger of the wheel protector touching arches in case of maximum suspension compression. The other extreme here is setting the offset of the ET 45 or the standard ET 50 at the 205th wheel width, since there is a risk of touching the protrusion in the rear right wheel arch.

Note that a larger overhang provides a deeper fit of the wheel in the arch, but not vice versa, as many believe.

To maintain a smooth ride and in order to get rid of the "wretchedness" of empty wheel arches, we recommend opting for 205/60 R15.

Discussion of drive selection -

2.01.2018

From the right choice wheel disks, seasonality and condition of tires depend on the safety of the vehicle while driving. Alas, as practice shows, most even experienced motorists do not always take this seriously. What wheels to put on the Nissan Almera? Since this question is considered the most frequently asked on the forums dedicated to this car model, we will try to answer it as informatively as possible.

The main parameters of any wheel rim its dimensions and size are considered to be the maximum permissible load... All these values ​​are indicated in the car's operating book, or directly on the wheels installed by the manufacturer.

Such should be the Almeri G15. Where is Logan here?

The choice of disks for Almeria of different modifications (N16, Classic, G15)

On the Internet you can find enough information about the selection of disks and tires for various modifications of Almer. However, many owners still cannot fully understand: how to choose the right wheels and tires for a car? First you need to plunge into the history of the creation of this vehicle. The prototype of the Nissan Almera G15 was the Japanese Bluebird, basic configuration which was produced with rubber parameters 195/65/15. Since chassis this car has not changed much, and tires with such values ​​can be safely installed on modern modifications of Almera. For example, on the G15 model, standard tires with parameters 185/65/15 work well, however, on budget options they have proven themselves worse. Within the framework of the publication, we will not name the companies that produce tires. They are already known to everyone. Let's just say one thing: good tire should work out on average 5-6 seasons, although this depends on the mileage of the road surface and driving style. This has been proven in practice. The rubber of the Amtel company, which is often installed from the factory on budget Nissan, does not always meet the high requirements. This does not mean that it is bad, and the size of the disks does not fit it.

One of the common sizes is 205/55/16. Tires with these parameters can also be installed. But, here it is necessary to take into account the dimension of the disks, which should have the following designation 7.0 JJ PCD 4X100 DIA 60.1 minimum offset ET 43 or it can be reduced to ET 38. With a larger dimension, the protector may touch the wheel arch. With a large overhang, the wheel sits deeper in the arch, and not vice versa.

Almeria's tuners love Nismo wheels, they fit like family and look cool

The main indices in the designation of the wheels:

• PCD 4x100 - designation of wheel rim bolt pattern (4 bolts located on a circle with a diameter of 100 mm);
• ET - disc departure;
• JJ - disc width;
• H91 - maximum speed and the permissible mass (index H = 210 km / h, the number 91 denotes the mass, the maximum value of which is 615 kg);
• R is the diameter of the tire (this parameter must be equal to the diameter of the disc);
• Tubeless - "tubeless";
• W (Winter) - tire for winter;
• DIA is the diameter of the hub bore. Note that on some forged wheels its value differs upwards. In this case, special centering inserts are provided to help prevent wheel runout at high speeds.

The main dimensions of the Nissan Almera wheels: R15 4 × 100 ET35-45 J6.5, R15 4 × 100 ET35-45 J6, R16 4 × 100 ET35-45 J7, R17 4 × 100 ET35-45 J7. Rubber with the following parameters is suitable for these disc sizes: R14 175/70, R15 185/65, R15 195/60, R16 195/55.

Razortovanie discs

The factory bolt pattern of G15 wheels has a 4/100 or 4x100 formula. There are cases when car owners specifically change this parameter (for example, when). However, such a measure is not always justified, given that in this case the original design parameters set by the manufacturer are changed.

Razboltovka Nissan Almera 4 * 100

It is important to choose a disc with suitable bolt pattern. This is necessary for correct wheel alignment. Note that it is allowed to install a disc, the diameter of the fastening circle of which differs from the value set by the manufacturer by a few millimeters up or down. In this case, the car owner acts, as they say: at his own peril and risk. An incorrect bolt pattern causes a wheel alignment disorder, which in the future can lead to serious problems, up to spontaneous loosening of the bolts at speed. In addition, vibrations can be felt while driving. Moreover, the greater the discrepancy, the greater the discomfort from movement is felt by all those present in the vehicle interior.

Choosing winter tires for Nissan Almeria

Many owners choose not to focus on tire seasonality. Most likely, for reasons of economy, they simply buy all-season tires, sometimes not even always of satisfactory quality. However, its use is largely justified only in regions with a mild climate and warm winters.

When it comes to winter riding, it is recommended to purchase only high quality Nissan Almera tires, which are made of durable and soft rubber. If on summer tires still somehow you can save money, then you should not do this on tires for winter. Why it is necessary to purchase only high quality branded winter tires? Only such products differ in their composition: due to the presence of a large amount of synthetic rubber, the tire tread at any, even extremely low temperatures, remains plastic, providing excellent grip on any winter road surface.

The fundamental factor in choosing winter tires it is not the presence of the letter "W" on the side of the tire, and not the manufacturer (in conditions of tough competition, everyone is trying to keep the brand), but a clearly defined tread pattern, which can be of two types:

1. Scandinavian
2. European

They differ in the depth of grooves and blocks on the tread plane. The Scandinavian type has deep grooves in the figure and is more adapted for driving on snowy roads. European - on the contrary, differs in a less pronounced pattern and is intended more for driving on icy highways. In addition, manufacturers produce tires with a universal tread pattern that performs well on both snowy and icy winter roads.

Differences between studless winter and summer tires

In regions with a large predominance of icy roads, it is recommended to install special winter studded tires with a universal tread pattern on the car. Such rubber is sold both in a ready-made version (with installed spikes), and with the possibility of their self-assembly. High quality, soft, studded tires significantly increase handling vehicle on icy and snowy highways, making the ride comfortable and safe.

To drive a car safely, it is necessary to select the right tires and wheels. Unfortunately, many car enthusiasts do not take this issue very seriously. But the work of the suspension, the dynamics of the car and the ride comfort depend on the size of the wheel.

Nissan almera

The car is the prototype of the Japanese BluBord. It was produced from the factory with 195/65/15 tires. For all the years of production, the chassis has not undergone any changes, so wheels with such parameters fit the latest Almera modifications.

On the Nissan Almera G15, 185/65/15 tires are great. For a budget option, it is better to put other models. The most common are 205/55/16. However, when installing, consider the size of the drives.

It should be marked 7.0 JJ PCD 4X100 DIA 60.1. In this case, the minimum overhang should be in the range ETT 38 - ET 43. If you set the size too large, the wheel arch protector may touch it. When the overhang is increased, the wheel sits deeper into the wheel arch.

Nissan x-trail

Over the years, the car was produced with various configurations... Besides the engine, appearance and the interior of the passenger compartment, the size of the wheels also changed. The car, produced in 2001-2006, was equipped with 215/65 R16 tires. The tires sat on discs with a bolt pattern of 5x114.3, with a central hole diameter of 66.1. Departure was 40.

On cars of the second generation, produced in 2007-2010, the manufacturer recommends installing tires:

Third generation of cars Nissan x-trail the plant began to produce in 2011. All subsequent lines of the machine are equipped with the same wheels. Manufacturers recommend installing tires and wheels of the following sizes:

Nissan teana

The car belongs to the business class. From the factory, it is produced with 16-18 inch alloy wheels. Main parameters:

• Razboltovka - 5x114.3,
• Width - 6.5-8.0J,
• Departure - ET 40-47,
• The central diameter is 66.1.

All these dimensions are selected depending on the configuration of the machine. Standard:

• 215/60 / R16,
• 215/55 / ​​R17,
• 235/45 / R18.

Some drivers use R18 tires. For them, parameters 225/45 R18 are considered ideal. Most suitable discs:

• Razboltovka - 5x114.3,
• Width - 6.5-7.5J,
• Departure - ET 45-50,
• The diameter of the central hole is 66.1.

Other generations of Teana are equipped with similar tires with the same wheels.

Nissan almera classic

The production of the car began in 2006. All subsequent models were equipped with the same wheels. The only difference could only be the volume of the internal combustion engine. Today the car is equipped with a 1.6 B10 Sedan engine.