Vaz 2109. The fact that the cable has broken is very easy to understand: when you pull the hood opening lever from the passenger compartment, you feel no effort and no sounds. The lever does not return to its place. The hood naturally does not open, since the lever pulls the retaining spring back with a cable.
Sooner or later, the hood of the VAZ 2109 will still have to be opened, but how to do it if pulling the lever from the passenger compartment does not open it. Naturally, no one wants to spoil the hood, and it must be opened without mechanical damage. This is done as follows: it is necessary to crawl under the hood from below and bend the retaining spring of the hood of the VAZ 2109.
It's just that you can't climb under the hood of the VAZ 2109, because protection is installed from below. This work is best done on a viewing pit or an overpass. Naturally, you can cope while lying under the car, on the flyover or inspection pit it will be more convenient, since it is not so easy to reach the VAZ 2109 hood spring from the bottom of the car.
The first thing to do is to remove the protection. It is better to remove all of its sheets so that it is more convenient to crawl.
They are removed simply - self-tapping screws are unscrewed and the sheets are easily removed. Now it is necessary to try to reach out with your hand to the retaining spring under the hood through the formed space.
It is better to illuminate yourself with a flashlight, since nothing will be visible and you will have to act by touch. It is necessary to bend the spring towards the battery. When the hood opens, you will hear a click, similar to that which is always heard when opening the hood from the passenger compartment. It will be easier to do this if someone presses down on the hood in the area of the lock from above. That's it, the hood of the VAZ 2109 is open, despite the torn cable.
What to do if you find yourself in the following situation: the hood cable of the VAZ 2109 broke. The fact that the cable broke is very easy to understand: when you pull the hood opening lever from the passenger compartment, you feel no effort and no sounds. The lever does not return to its place. The hood naturally does not open, since the lever pulls the retaining spring back with a cable.
It is necessary to bend the retaining spring of the hood VAZ 2109
Sooner or later, the hood of the VAZ 2109 will still have to be opened, but how to do it if pulling the lever from the passenger compartment does not open it. Naturally, no one wants to spoil the hood, and it must be opened without mechanical damage. This is done as follows: it is necessary to crawl under the hood from below and bend the retaining spring of the hood of the VAZ 2109. You simply cannot climb under the hood of the VAZ 2109 from below, because the protection is installed from below. This work is best done on a viewing pit or an overpass. Naturally, you can cope while lying under the car, on the flyover or inspection pit it will be more convenient, since it is not so easy to reach the VAZ 2109 hood spring from the bottom of the car.
The first thing to do is to remove the protection. It is better to remove all of its sheets so that it is more convenient to crawl.
Engine protection VAZ 2109
We unscrew the self-tapping screws for the protection of the VAZ 2109
They are removed simply - self-tapping screws are unscrewed and the sheets are easily removed. Now it is necessary to try to reach out with your hand to the retaining spring under the hood through the formed space.
Place of attachment of the hood cable to the spring
It is better to illuminate yourself with a flashlight, since nothing will be visible and you will have to act by touch. It is necessary to bend the spring towards the battery. When the hood opens, you will hear a click, similar to that which is always heard when opening the hood from the passenger compartment. It will be easier to do this if someone presses down on the hood in the area of the lock from above. That's it, the hood of the VAZ 2109 is open, despite the torn cable.
Hood lock VAZ 2109
The cable now needs to be replaced. We buy a new cable and put it in place of the old one. We are convinced that the work is working properly, the lever in the cabin must regularly open the hood of the VAZ 2109. This method is very simple and does not require any tools and time consuming work. To main.
vaz2109.net
How can you open the hood on a VAZ 2109: if the cable breaks
How to open the hood on a VAZ 2109 if the cable breaks? This is a small, but still a problem. Especially when it's cold outside. Most often, it is in such weather that this problem happens. Another, more common, reason for the failure of the cable is its deterioration. 
- The cable broke under the hood
If the gap has occurred inside the cabin
A wire rope, or pull rod, is a single-strand or multi-stranded steel wire enclosed in a sheath, on top of which is a metal braid. Its main function is to open the bonnet by mechanical action on the handle of the lock. To solve the problem of how to open the hood of a VAZ, you need to take certain actions.
First, you should find the place where the cable broke. To this end, it is necessary to inspect the mechanism for opening the hood of a VAZ 2109 car or those places where access is still preserved. And you need to start by examining the handle of the lock.
The present mechanism includes a lock that holds the hood closed and a hook that prevents the hood from opening unintentionally. Their location is at the front of the bonnet. The handle of the lock is taken out into the salon and is located on the left under the dashboard. Having decided on the cliff, you can start the work itself.
Various options are possible here. If the cable breaks inside the passenger compartment, then, using pliers, you need to pull out its remnants from under the panel, grab the edge of the rod (core), but in no case by the sheath, and pull it hard enough towards you, that is, to the side salon.
Moreover, this should be done smoothly, without jerking. Otherwise, you can tear it elsewhere. In order to prevent the cable from falling out of the pliers, it is necessary to construct a loop at its end and thread it onto the tool. Maybe the hood will open.
Back to the table of contents
The cable broke under the hood
The cable may have broken under the hood. In this case, the following algorithm of actions is proposed:
- If possible, drive the VAZ 2109 onto a lift, overpass or inspection pit. Can be jacked up. At the same time, in case of failure of the jack, insure against falling of the car.
- Carefully remove the engine crankcase guard, which is held in place by several self-tapping screws. Do the same with the tin boot to provide the necessary space for further manipulation.
- Insert your hand into the opening between the radiator and the engine compartment. Feel for the ring where the rod is attached. It is not difficult, it is located directly next to the bonnet lock. Reach the ring from the bottom, pull or press to the left with force, towards the driver's door. If even then the hood of the VAZ 2109 does not open, then at the same time you also need to press on it from above. So, the ring will become malleable. A little effort and the hood is open. It is better if 2 people are involved in the process.
- After that, you need to dismantle the old torn cable and install a new one. The work will be greatly simplified if one person pulls the spring at the lock, and the other takes care of fixing the cable on the handle of the locking device. First, you will have to knock hard on the body with the hood, but over time everything will be fine.
There are also other options for opening the hood.
- Raise the hood of the VAZ 2109 and try to open its lock with a long wire.
- Contact a car repair shop, where the hood will be opened professionally, efficiently and in a short time, the cable will be replaced, and the reason, if it is technical, will be identified and eliminated.
- View the instructions for the VAZ 2109 car. As a rule, it indicates possible malfunctions and ways to eliminate them. In extreme cases, it is advisable to at least familiarize yourself with the layout of the thrust.
In order for the cable to last longer, you must:
- lubricate its outputs with lithol;
- use a stranded cable, as it is strong, flexible, does not stretch and wears out slowly;
- be very careful with the handle of the lock.
Do not consider the VAZ hood cable a trifle. This is a full-fledged part of a complex mechanism. Do not replace it with regular wire or even rope (such cases are known). It's not safe. Take care of your nerves and health, respect yourself and your car.
expertVAZ.ru
How to open the hood of a VAZ-2109 with a torn cable
The VAZ-2109 car is full of surprises, so those who like to modernize with their own hands in the garage of their beloved iron horse, the car will be to your liking. There are many malfunctions during the active operation of the VAZ-2109, but there are also a lot of tuning options.
One of the breakdowns can be a break in the cable that opens the hood of the car. Until you correct this problem, the hood will be idle in the closed position. The cable breaks more often in cold weather, not withstanding low temperatures. Another reason for damage to its integrity is the deterioration of the part.
What to do if the cable breaks in the cabin
A cable that allows you to open and close an important part of the VAZ-2109 is a stranded or single-core wire made of steel, placed in a sheath, on top of it there is a metal braid. The main task of the cable is to open the hood when forces are applied to the handle of the lock.
To open the structure when the cable breaks inside the VAZ-2109, it is necessary to inspect and evaluate the area where the break occurred. Despite the breakdown, access to some parts and areas is likely to have survived and should be explored. Investigation of the condition of the parts near the hood begins with an inspection of the lock handle.
The mechanism for changing the position of the VAZ-2109 hood presupposes the arrangement of the structure with a lock and a hook, the latter acting as a fuse against unauthorized opening of the hood. The details are placed in its front part. The manufacturer brought the handle into the salon and built it on the left right under the dashboard. Seeing the place of the cliff, you can proceed to further work.
Experts note several ways to open the hood with a torn cable at once. A rush inside the passenger compartment allows you to solve the problem using pliers.
Using a tool, remove the remnants of a torn part from under the panel, try to grab the edge of the rod, but do not touch the sheath.
Using force, pull the edge of the rod towards you, but at the same time, keep it smooth, do not allow sudden jerks. Otherwise, there is a high risk of a cable break elsewhere. If you want to make sure that the cable does not fall out of the pliers, make a loop at the end of the part and thread it through the tool.
If the cable breaks under the hood of the VAZ-2109
There are times when the cable breaks at its location right under the hood. Then use this step by step instructions:
- You will need a lift, flyover or observation pit. If there is a jack, use it, having secured the car from falling from a height in advance.
- With the machine at the top, start removing the protection that fits the engine crankcase, it is fixed with several fasteners. Do the same manipulations with a tin boot, this will help free up space for further actions to open the hood.
- Place your palm in the hole between the radiator and the motor compartment. Feel with your fingers the ring in which the rod is fixed - the component is located near the lock device.
- Reaching the ring, pull it towards you with an effort and push to the left, focusing on the door next to the driver. The hood should now open.
- If the manipulations did not give a positive result, and the hood is still closed, also try to press on the ring, press it well. To make the process go faster, it is advisable to enlist the help of another person.
- It remains to remove the torn cable and replace it with new sample... The assistant must tighten the spring mechanism located at the lock, and the owner of the car at this time fixes the cable on the handle of the locking mechanism.
Alternative ways to open the hood of the VAZ-2109
Experts share additional ways to solve the problem with opening the hood of the VAZ-2109 due to a broken cable:
- Raise the hood of the car and use a long wire to open the keyhole.
- If you didn't manage to open the hood with your own hands, you should contact a car repair shop, whose workers will do the job efficiently and quickly, and besides, they will change the torn cable themselves.
How open hood of VAZ-2109 with a torn cable
VAZ car 2109 full of surprises, so those who like to upgrade on their own in the garage of their favorite car, the car will be in the mood. There are a lot of malfunctions at the time of active use of the VAZ-2109, but there are also a lot of tuning options.
One of the breakdowns is a break in the cable that opens the hood of the car. Until you correct this problem, the hood will be idle in the closed position. The cable breaks more often in cold weather, not withstanding cold weather. The next reason for damage to its integrity is the deterioration of the part.
What to do if the cable breaks in the cabin
A cable that allows you to open and close an important part of the VAZ-2109 is a stranded or single-core wire made of steel, placed in a sheath, on top of it there is a metal braid. The main task of the cable is to open the hood when forces are applied to the handle of the lock.
To open breakage structure cable inside VAZ- 2109 , it is necessary to inspect and evaluate the area where the rupture occurred. Despite the breakdown, access to some parts and areas is likely to have survived and should be explored. Investigation of the condition of the parts near the hood begins with an inspection of the lock handle.
The mechanism for changing the position of the hood VAZ- 2109 assumes the arrangement of the structure with a lock and a hook, the latter acts as a fuse against unauthorized opening of the hood. The details are placed in its front part. The manufacturer brought the handle into the salon and built it on the left right under the dashboard. Seeing the place of the cliff, proceed to further work.
Read also:
How to open the hood of a vaz 2109 without a cable.
Experts note several ways to open the hood with a torn cable at once. A rush inside the passenger compartment allows you to solve the problem using pliers.
Using the tool, remove the remnants of the torn part from under the panel, try to grab the edge of the rod, alas, do not touch the braid.
With an effort, pull the edge of the rod towards you personally, alas, at the same time adhere to a smooth stroke, do not allow sudden jerks. Otherwise, there is a high risk of a cable break elsewhere. If you want to make sure that the cable does not fall out of the pliers, make a loop at the base of the part and thread it through the tool.
Read also:
HOW OPEN THE HOOD VAZ (if the cable has flown off or broken)
With such a weakly tricky measure, we save ourselves from the trouble that caught you by surprise.
If the cable breaks under the hood of the VAZ-2109
There are times when the cable breaks at its location right under the hood. Then use the following step-by-step instructions:
- A lift, overpass or observation pit is required. If there is a jack, use it, having secured the car from falling from a height in advance.
- With the machine at the top, start removing the protection that fits the engine crankcase, it is fixed with several fasteners. Do the same manipulations with a tin boot, this will help free up space for further actions to open the hood.
- Place your palm in the hole between the radiator and the motor compartment. Feel with your fingers the ring where the pull is fixed - the component is placed near the lock device.
- Reaching the ring, pull it firmly towards you personally and push to the left, taking into account the door next to the driver. The hood should now open.
- If the manipulations did not give a positive result, and the hood is still closed, also try to press on the ring, press it well. To make the process go faster, it is advisable to enlist the help of more) a person's textbook.
- It remains to remove the torn cable and replace it with a new sample. The assistant must tighten the spring mechanism located at the lock, and the owner of the car then fixes the cable on the handle of the locking mechanism.
Alternative ways to open the hood of the VAZ-2109
Experts share additional ways to solve the problem with opening hood VAZ-2109 on the base of the cliff cable:
Read also:
How to open a vaz 2109 without a key video.
- Raise the hood of the car and use a long wire to open the keyhole.
- If you open hood It didn't work out with your own hands, you should contact a car repair shop, whose workers will do the job efficiently and quickly, and besides, they will change the torn cable themselves.
The instructions supplied with your car can help you to open the immobilized hood on your own. In it, the manufacturer describes common breakdowns and do-it-yourself methods for eliminating them. In any case, you will have to study the layout of the thrust.
In order for the cable in the VAZ-2109 to serve for a long time, use the following recommendations from specialists:
- Treat the outputs with lithol.
- Use a multi-strand rope. It is considered the most durable, reliable and at the same time mobile, does not stretch too much and is characterized by slow wear.
- Carefully handle the handle of the lock mechanism.
Newbies in the repair business of domestic cars experiment in vain, replacing a torn cable with ordinary wire. In VAZ-2109, how to open with a torn cable hood, tell in the video instructions:
There is a special offer on our website. You can get a free consultation of our corporate lawyer by simply asking your question in the form below.
Post Views: 1
Car owners often face the problem of opening the hood due to a torn cable. This is an important detail that helps you gain access to the heart of the vehicle. A break in the cable drive gives the driver a lot of trouble. A breakdown always happens unexpectedly and at the wrong time.
Imagine a situation where on a winter morning, rushing to work, you try to start the car, but nothing happens. As a matter of urgency, pull the lever that opens the hood to see the engine. The characteristic sound of a broken cable is heard. And you understand that you have to take a taxi to work.
Any driver should be able to get out of such situations. This will make it possible to do without car service, save money and time. This article will help you learn how to open the hood if the cable breaks. By applying the tips, you will deal with the problem.
Ways to open the hood if the cable breaks
The design of the hood, the lock and the location of the cable drive are different on vehicles. But the repair sequence remains the same in all cases. The owners of domestic brands were more fortunate, since manufacturers over the years have not made significant changes in the design of the cars produced. Therefore, opening the hood will always work without problems.
Most often, the cable breaks near the lever, less often under the hood. In the first case, it is easy to cope with the breakdown, and in the second you have to tinker.
When the cable broke in front of the lever
This is the most simple situation... To eliminate the breakdown, inspect in the car the place of attachment of the cable and the hood opening handle, perhaps a stopper has fallen off the lever - insert it into place and secure. If you notice that the cable itself is broken, then you will need pliers. To open the hood, try to firmly grasp the cable together with the casing and pull it down. It may not work the first time. If a break occurs, cut the shroud and wrap the metal cable around the pliers, then pull firmly to open the hood.
When the cable broke under the hood
If you examined the mount inside the passenger compartment and did not find anything, then the cable broke off under the hood next to the lock. This problem is considered the most serious, because you need to somehow get access to the lock and forcibly click it off.
There are two main methods for the hood that opens back, which can be applied to domestic and foreign cars.
- Through the radiator grill. On many models, you can get to the lock using a homemade wire hook or knitting needle. Insert the hook into the slot in the grille. You can also crawl through the air intake. Reach the cable tab and pull on it. Some cars have a solid grille with no slots. In this case, it must be removed, but this is not always easy. In extreme cases, you have to break it. The new grille is inexpensive.
- Through the protection of the crankcase. This is another way to help you get to the castle. You will need a viewing hole, but if there is none, you will have to repair it while lying on the ground, jacking up the car. Remove the metal protection from the engine oil pan. Using a long screwdriver, remove to the tongue to which the cable is attached and push to the left (towards the driver). You may need the help of another person. You pull the cable, and the assistant first pushes the hood down, then lifts it.
If the hood opens forward, you will have to tinker with it. You will need a homemade crochet hook. You can get to the castle through the hood air intake. Remove it and hook on the cable through the grate. In some cases, you have to cut out one division, since the narrow slots interfere with the work.
If it did not work to open, then another method will help you. Raise the edge of the bonnet in the area of the lock. Pull out the sealing gum - you should get a gap. Then, using a long screwdriver or a hook, pick up the cable and the hood will open.
Causes of cable drive failure
A common cause of cable breaks is normal wear and tear. Over time, it stretches and frays where it bends. Lack of lubrication also greatly affects its service life.
If the lock and cable have not been treated with oil for a long time, then jamming occurs. The driver has to make a lot of effort to open the hood. As a result, the cable drive does not hold up.
Check the condition of the lock and cable regularly. At low temperatures, they freeze. When you feel that the hood is difficult to open, identify the cause and eliminate the malfunction without waiting for a breakdown. If, nevertheless, the cable breaks, then install a new one. Try to fix it securely without kinking. At the end, treat the lock with grease. After a well-done work, you will forget about the problem with the broken cable for a long time.
Video: how to open the hood - VAZ 2108-2115
The hood of the car is opened by pulling a special metal rope. However, nothing works for long. The cable may break. Now it will be impossible to open the hood, what should I do? So, let's consider several variations of the solution to the problem that has arisen.
Opening the hood of the VAZ 2107?
If the hood opening handle moves easily, the tension cable is torn. It is necessary to determine: where exactly this break occurred. If this happened closer to the opening handle (it is located in the passenger compartment), then the torn rope can be picked up with a homemade hook or other convenient means, pulled into the passenger compartment and made renovation work... If the tension cable breaks in the engine compartment, then the problem is more serious, but you should not panic. You can hook the broken cable from the side of the radiator grill. Any braid is suitable for this. You can also try to reach the lock hook through the cabin air ducts.
Such actions are very difficult to perform. If all efforts are in vain, then you will have to cut the fastening loops of the hood itself (repairs will be expensive in the end). For this, the radiator grille is removed, the fixing loops are cut off with a grinder, then it is not difficult to replace the torn cable.
Opening the hood of the VAZ 2109?
In order to open the hood on a VAZ 2109, you need to get under the car. Next, we make simple steps. Remove the crankcase protection and tin boot. This must be done so that the hand goes near the radiator. Next, we grope the ring to which the cable is attached, and press the lock. The assistant from above opens the hood. It is worth noting that the rope is attached directly to the lock, so we press on the ring only from the side and in the direction of the driver's seat. For craftsmen, a method of opening the hood with a long wire is suitable. You can pick up the hood lock with a homemade hook.
Opening the hood of the VAZ 2114?
For this car, the way to open the hood is the same as for the VAZ 2109. After removing the engine protection, you need to move the tail of the spring to the side (this is how the cable works). For the VAZ 21014, the radiator grill is made of plastic, so it can simply be broken, the cable and the grille itself can be replaced (it is very inexpensive).
Qualified help is the best solution
If you yourself cannot solve the problem with opening the hood on your vehicle, then it is better to contact technical assistance. A qualified team will quickly solve your "problem" and you will be able to continue using the car. In Togliatti and the region, the General company provides effective assistance. This is the right decision for many road and technical problems with technical means.
