To date, the scope of application of cranes on truck chassis has expanded significantly. Its main purpose is loading, unloading and delivery of various goods to their destination. In addition, manipulators can be used to erect structures directly on site. The use of CMU not only simplifies the construction and installation work, but also due to economic reasons. Such installations are quite versatile and easy to maintain. A manipulator or CMU replaces a truck, crane and a team of workers, which can significantly save resources when carrying out various activities.

Like a mobile crane, a crane-manipulator installation in its design features is a lifting device of increased danger, it is subject to mandatory registration with the Federal Service for Environmental, Technological and Nuclear Supervision (Rostekhnadzor), which is enshrined in Federal Law No. 116-FZ of July 21, 1997 "On industrial safety of hazardous production facilities."

Registration of a crane-manipulator installation as a hazardous production facility with the Federal Service for Environmental, Technological and Nuclear Supervision (Rostekhnadzor) implies the formation and preparation of an extensive list of necessary documentation in accordance with the requirements of the legislation, which often requires the attention of experienced specialists and the use of specific knowledge and skills. With our help, you will be able to obtain a complete package of documents, including a Certificate of Registration of a Hazardous Production Facility for the successful conduct of construction work at the facilities.

As well as registration of a crane on a truck chassis, registration of the CMU with Rostekhnadzor includes 2 stages, where each has its own clear sequence and implies the preparation of a package of necessary documentation in accordance with the requirements of the legislation. Our specialists have extensive knowledge and solid experience and are ready to help you in such a complex procedure as registering a crane installation at Rostekhnadzore.

However, not every installation requires registration with Rostechnadzor authorities. There are a number of vehicle models that are not subject to registration. These include:

Loader cranes installed on the foundation;

Truck mounted cranes, pneumatic-wheeled, short-base, crawler cranes, on a special chassis, on a chassis and close and crawler tractors, rail, railway, movable, trailed, self-aligning with a carrying capacity of up to 1 ton, inclusive, or with a load moment of up to 4 tons, inclusive;

Loader cranes for training purposes.

If your equipment is subject to the registration requirements, then it must be taken into account that the registration procedure for a truck-mounted crane at Rostekhnadzor consists of two stages:

Stage 1. Registration of the CMU as a technical device

Before conducting registration actions in relation to the installation, the operating organization or the owner must make the initial decision on putting it into operation, which is regulated by the safety rules of the hazardous facilities where the lifting structures are used. After commissioning, the owner of the crane or the operating organization prepares a package of documents for registration. In this case, the following documents must be submitted to the territorial office of Rostekhnadzor:

1. Application;

2. The original passport of the lifting mechanism, which must contain information about all persons responsible for the crane-manipulator, and performed technical inspections of equipment;

3. Certificate of conformity for the lifting mechanism;

4. Agreement with a company that is responsible for the implementation of technical inspection of the state of technology;

5. Documents confirming the appointment of certain persons responsible for the correct and safe operation equipment, control of its serviceability, compliance of the work on the crane with the established standards.

6. Documents confirming the right of ownership or use (contract of sale, lease, etc.);

7. Constituent documents of the operating organization.

After submitting the package of documents, the Rostechnadzor inspector checks the submitted documents and makes a decision on registering the CMU or on returning documents with comments for further correction. In case of a positive decision, the technique is assigned a registration number. The registration number assigned during registration has no validity period.

Stage 2. Registration of the crane in the register of the HIF

After assigning a registration number, it is necessary to register the handling unit as a hazardous production facility (HIF) with the assignment of IV hazard class. The owner or operating organization must submit the following package of documents to the registering authority:

1. Application;

2. Completed information characterizing the HIF;

3. A copy of the compulsory health insurance policy;

4. A copy of the document confirming the right to own or use the OPO (sale and purchase agreement, lease, etc.);

5. Copy of the crane passport;

6. Constituent documents of the operating organization.

State bodies strictly monitor the fulfillment of the obligation to register such equipment, therefore, there are sanctions for its failure. So, for example, for non-compliance with the rules for accounting and registration of lifting structures, according to Chapter 9 of the Code of Administrative Offenses of the Russian Federation, it is provided administrative penalty for violation of legislation in the field of industrial safety, the amount of which can reach 1 million rubles.

By contacting our organization, you receive a guarantee of successful registration of a hazardous production facility, as well as registration of a truck crane as soon as possible, our lawyers will advise you on accounting for technical equipment, and will also select the most convenient option for registration with Rostekhnadzor and operation within the framework of current legislation,thereby protecting your company from unnecessary red tape and high fines.

ADVANTAGES YOU WILL RECEIVE BY CONTACTING US FOR HELP:

1. Free consultation in the field of industrial safety throughout the entire process of registration of the CMU as an OPO;

2. Registration as soon as possible (within the limits of the current legislation);

3. No unnecessary actions. Our employees go to your office, draw up the necessary documents.

4. Guarantee of obtaining a certificate of registration of the organization in the register of hazardous production facilities with registration by the CMU;

5. Comprehensive development of internal documentation required by law, at the request of the customer.

Our company EuroSpecTechnika LLC offers you assistance in preparing a complete set of documents for a manipulator (CMU) for registration with Rostekhnadzor.
To register a crane manipulator, you need the following documents:
The passport of the manipulator (CMU), of the established form according to PB 10-257-98 and order No. 533 of the Gosgortekhnadzor of Russia.
Permission to apply
Customs Union Certificate of Conformity
Industrial safety expertise conclusions for Rostekhnadzor (if the crane manipulator is more than 10 years old)
To register a PBO, you will need the following documents:
Passport to the CMU (with marks on the passage of the PTO or WHAT)

We are ready to produce in the shortest possible time and provide you with all the documentation for setting the manipulator to the Rostekhnadzor authorities or Also, in addition to making a passport from scratch, we can make a duplicate of the passport of the manipulator crane.

We work with many factories, manufacturers of CMU, therefore we have a large base of production documentation for the development of a passport.
Our company is ready to assist in the production of a passport for manipulators, cable or hydraulic. It can be scrap trucks, timber trucks, airborne, arches, with hole drills and much more. For the most part, we order passports for cranes of the following brands of manipulators:
HIAB, DONG YANG, SOOSAN, KANGLIM, UNIC, TADANO, HORYONG, HOTOMI, PALFINGER, FASSI, INMAN, CS Machinery CSS, MAEDA, other.

What is included in the passport of the manipulator:
1... Permission to apply ( all permits make their way through the Rostekhnadzor base )
2. Certificate of Conformity ( make their way through the Rosaccreditation base)
3. General information
4. Circuits hydraulically and electrically
5. Diagram of the device of safety (and their photos)
6. Scheme and diagram of cargo-altitude characteristics
7. Mark in the certificate of acceptance (by an organization licensed by Rostekhnadzor)
8. Mark about the passage of the PTO or WHAT (by an organization licensed by Rostekhnadzor)
The passport consists of 60 pages without changing, it is stapled in the printing house and in hardcover.

Our certificates and licenses

We can also make lost nameplates for manipulators

Call or email This email address is being protected from spambots. You need JavaScript enabled to view it., and you will receive qualified assistance with documents for cranes manipulators!

An example of several important passport pages for a crane manipulator. (An example is given on the DONG YANG 1926 passport)

Special equipment is widely used in many areas of human economic activity. This includes construction, transportation, and loading operations. Perhaps the most demanded technique today is a truck with a crane-manipulator installed on it.

The reasons are simple - such a machine is distinguished by enviable cross-country ability and carrying capacity, it can carry out both loading and unloading operations and cargo transportation. In addition, the crane mounted on the chassis allows you to reduce the cost of renting additional equipment and hiring labor. The increased demand for dictates new requirements for permits for such devices and the qualifications of drivers of special equipment.

What kind of knowledge should a specialist driving a car with a crane have? What documents are required for the operation of the CMU? To get answers to these questions, you need to study the corresponding instructions.

Requirements for Truck Drivers with a Loader Crane

The activity is responsible and difficult, therefore the requirements for it are quite high. Only qualified specialists manage to get a job in a large, developing company. The driver of such a vehicle must have:

• category C driver's license;
• an idea of ​​how the manipulator works;
• crane operator's certificate, if the special equipment belongs to truck cranes;
• an order for carrying out activities with a permit from the State Supervision Authority, if work is carried out in certain areas, for example, near power lines.

In great detail and clearly, all the requirements are spelled out in model instructions for crane operators and drivers of self-propelled cranes, approved by Gosgortekhnadzor. In accordance with it, to the employees who manage mobile cranes, a number of requirements are imposed.

1. The driver can be admitted to after completing the training course under the training program for crane operators and obtaining a certificate.
2. Persons at least 18 years of age, without health contraindications, who have passed a medical examination, can master the profession of a crane operator.
3. The exam for those trained in the specialty "crane operator" is taken by a commission and a representative from Gosgortekhnadzor. If the result is positive, the crane operator is issued a certificate. It contains information on the type and construction of the crane, which the driver is authorized to operate.
4. The crane operator and his assistant must be issued with permits for activities, signed by the owner of the crane or.

In addition to the above, companies often have special requirements for the professional and personal qualities of the future manipulator operator:

• extensive experience in;
• attentiveness, composure, resistance to stress and responsibility;
• speed of reaction;
• experience in driving trucks;
• the ability to draw up shipping documents;
• knowledge of the infrastructure of the city, region (if the manipulator is used as a tow truck).

However, it is still possible to get a prestigious position, despite the impressive list of requirements. The main thing is to make it clear to employers that you are exactly the specialist they need. And please note: it can take up to 1 month to receive the documents required for work.

Registration of CMU with Rostechnadzor authorities

To work on a car with a loader crane, you must have the following papers:

• equipment passport in Russian, drawn up in accordance with the requirements for passports Vehicle and truck cranes;
• permission to operate the CMU, issued by Rostekhnadzor of Russia.

Crane on the base truck must be registered with Rostekhnadzor as a hazardous production facility (HIF). Please note: a manipulator with a lifting capacity of up to 1 ton and a load moment of 4 tons, as well as a crane for training purposes, do not need to be registered.

Industrial safety expertise is provided for HIFs. From documents for special equipment it is necessary technical certificate installation or its duplicate. The staff of the organization, the property of which is the CMU, should include:

• a specialist certified to operate a manipulator and holding a valid certificate;
• slinger with a training certificate.

Now you need to prepare documents for submission to Gostekhnadzor. First, we submit primary papers.

1. Application for registration of a lifting mechanism (GPO).
2. The passport for the crane.
3. If the CMU is not new, an agreement is required with the organization that carried out the technical inspection of the installation.
4. Appointment orders:

• a safe operation supervisor;
• responsible for maintaining special equipment in working order;
• the person responsible for the safe operation and performance of the loader crane.

Having handed over all the necessary papers, you will receive the forms of regulations and orders, which must be filled out with the help of the Rostechnadzor inspector assigned to your organization. All completed documents are submitted to the Rostekhnadzor office.

1. Production control regulation.
2. A letter of agreement on this provision.
3. Order on technical supervision of the safety of lifting machines in production.
4. Registration card for special equipment in the state register of hazardous production facilities.
5. Characteristics and data of the manipulator, reported additionally.

The representative of Rostechnadzor must stamp all documents and make notes on the date of admission. Now all that remains is to wait. If everything is executed correctly, then the passport for the crane with marks of the passed registration will be ready in about 30 days. In the meantime, the permits are being prepared, it is necessary to insure the car as a HIF. The insurance will have to be renewed once a year.

When you have all the permits in your hands, you need to draw up a letter to Rostekhnadzor so that an inspector will be allocated for you to start up the manipulator. The planned start of operation of the CMU must be notified at least 5 working days in advance. The inspector issues a permit based on tests carried out at the manufacturer or on a technical examination carried out by the owner of the manipulator. Before signing the permit, the device is once again inspected and checked at the owner's territory, the provided papers are checked and the level is assessed Maintenance installation.

The registration procedure for vehicles will have to be repeated in case of:

• repair and obtaining a new passport for the manipulator;
• sale or transfer of management of the CMU to a new owner;
• overhaul, modernization, improvement.