Power saving mode is a recent feature of the iOS system, which became available to smartphone users with the release of iOS 9.
Putting a mobile device into this mode will allow users to conserve iPhone battery power by reducing the amount of power it consumes. In this case, the device itself in the economy mode may work a little slower, and some functions will become completely unavailable.
An indicator that your smartphone is in power saving mode is that the battery icon in the status bar turns yellow. By this yellow battery, you can always understand whether the mode is on or on on the iPhone.
How to Enable Power Saving Mode on iPhone
You can manually enable this mode on the iPhone in the settings of the mobile device: open the settings, go to the "Battery" section and drag the toggle switch to the "On" position. It is expected that such a maneuver will extend the operating time of your mobile device by 3 hours, however, the performance of the smartphone will decrease by 40%.
Do not want to climb into the settings? Ask Siri to activate the mode, the voice assistant can do it.
Also, the mobile device independently offers to turn on the power saving mode when the battery level is low, or rather, when the charge drops to 20%, displaying a dialog box on the iPhone screen.
How to disable power saving mode
The mode is exited automatically when the iPhone battery level rises above 80%.
However, not everyone is ready to wait and put up with the features of the smartphone in economy mode, like a 30-second automatic lock. In this case, you can go to "Settings"\u003e "Battery" yourself and turn off Low Power Mode.
If you did not find an answer to your question or something did not work out for you, and there is no suitable solution in the comment below, ask a question through our . It's fast, simple, convenient and doesn't require registration. You will find answers to your and other questions in the section.
Why is the charging on the iPhone turned yellow? A similar phenomenon can be observed at times when the battery percentage is close to zero, but it often happens when the battery level is normal. How seriously to take this signal, and is it worth calling the master in this case? You will receive answers to these questions in this article.
Reasons for the yellow iPhone battery icon
If you have such an indicator on, then this indicates that the phone is currently in power saving mode. This is the name of a special option that will allow you to save the level of charge by limiting some functions of the smartphone. This is very convenient when there is no way to charge the device, but you need to stay in touch for as long as possible.
Features of iPhone Power Saving Mode
- Reduced display brightness. In this mode, the backlight percentage is much lower, as it takes a lot of energy to keep the screen running.
- Optimized performance. This means that all minor additional features are disabled in the gadget, such as menu animations, some minor services, etc.
- Disable background downloads. The mode assumes that updates for applications and software that are usually installed by default will not be downloaded to the iPhone unless the owner disables this feature on their own. Also, AirDrop, iCloud sync, etc. become unavailable.
How to disable power saving mode
Now you know why the battery icon on the iPhone turned yellow. Of course, this is sometimes a very useful feature. But what if at the moment you need to use the full capabilities of your smartphone? In this case, you can simply charge it more than 80% or disable the option manually.
Instructions for canceling the power saving mode:
- Go to the "Settings" menu of the iPhone;
- In the list that opens, find the item "Battery";
- In this section, you need the option "Power saving mode";
- Disable the mode.
After disabling the option, the smartphone should work at full capacity and you will be able to use all its functionality. If this does not happen and the iPhone indicator color is still yellow, there is probably some kind of software failure and the setting cannot be canceled. In this case, you should contact a specialist.
How to order iPhone diagnostics and setup
At the first sign of a breakdown, contact the qualified masters of the Spravnik service center. If you have a question why the charging icon on the iPhone is yellow after turning off the power saving mode, then only professionals can answer it. And we are ready to provide our customers with their services. To order the departure of the master, call or leave a request on the site.
Surely every owner iPhone And iPad at least once wondered why the battery level indicator turns yellow from time to time. The answer is extremely simple - the yellow indicator means that the device is in power saving mode. What is it and how to return the usual charge indicator? What is power saving mode? Power saving mode is a useful feature in iOS that allows you to save battery life. When the battery is low (from 20% and below), it automatically offers to change some settings in order to reduce power consumption (dimming the screen, turning off new email notifications, deactivating the "Hey Siri" function, etc.). This mode significantly extends battery life, as indicated by the yellow color of the indicator. Users who want to extend the battery life of their gadget can enable the feature themselves whenever they wish. However, iOS offers to activate the power saving mode when the battery drops below 20%. 
In this case, the indicator turns yellow, confusing some. When connected to a power source, the mode remains active until the battery level reaches 80%, after which it automatically turns off. In case the function was activated manually (after 80%), it remains enabled even when the battery is fully charged.
How to disable power saving mode
There are two ways to deactivate the function and get rid of the yellow icon. First, you can put your iPhone on charge and wait until the battery level reaches at least 80%. In this case, the mode will turn off automatically, and the indicator will turn green again. Secondly, you can turn off the power saving mode yourself. To do this, open the "Battery" section in the "Settings" application and move the lever to the "off" position. next to "Power Saving Mode".
Keep in mind that Power Saving Mode significantly extends battery life, and if you don't mind turning off some features, it will allow you to use your iPhone and iPad for much longer. In addition, this mode is the only effective way to increase the battery life of devices running iOS 9 and later. Taken from
Surely every owner of the iPhone and iPad at least once wondered why the battery level indicator turns yellow from time to time. The answer is extremely simple - the yellow indicator means that the device is in power saving mode. What is it and how to return the usual charge indicator?
What is power saving mode?
It is important to periodically calibrate the lithium-ion battery. Battery calibration does two things: it sets up the battery and it helps the software calculate the battery life range. Periodically draining and recharging the battery keeps the flow of ions moving in the battery. The material properties of lithium-ion batteries require constant use to maintain peak performance.
With each update, new features are added, some of which affect battery life. Research and experience have proven otherwise. The first step is to fully discharge the battery. This can be done in normal use, but sometimes it may not be an option. After all, you don't want to leave to work with the remaining 2% resource. Sometimes 2% can last several hours. It's best to drain your battery when you can go without your device for a few hours, perhaps before bed.
Power Saving Mode is a useful feature in iOS that allows you to save battery life. When the battery is low (from 20% and below), it automatically offers to change some settings in order to reduce power consumption (dimming the screen, turning off new email notifications, deactivating the "Hey Siri" function, etc.). This mode significantly extends battery life, as indicated by the yellow color of the indicator.
To speed up battery drain, turn on the flashlight, turn up the brightness, and play a video, preferably streaming over the Internet. Once your device turns off due to insufficient battery charging, it's best to leave it for a while. If possible, leave it overnight and don't charge it until the next morning. This isn't always an option, and if it's too inconvenient, skip this step. Allowing the device to sit overnight will further drain the battery. This is partly due to the fact that when the power was turned off, there was some battery life left.
Otherwise, it will shut down without saving its state to secondary storage. Store it in the charger until it is at least 100% charged. If possible, keep it in the charger longer. Holding the device in the charger after reaching 100% ensures that it is fully charged. Two extra hours should do it. It will also generate less heat, which will extend the overall battery life. Now that your device is fully charged, you must reset it.
Step by Step Battery Calibration
The device will boot up and will now be reset. Remove the charging cable when the device is up and running. For some, it may not be possible to complete all of these steps. If your battery life is around 0% and you want to drain it faster, turn on your flashlight, turn your screen brightness all the way up, and play a video, preferably from the internet. In some cases, calibration can help, but it is not a panacea. Luckily, you can extend the life of your new battery by following a few tips.
- No buttons or switches or indicator lights.
- Should not interfere with cell intake.
Users who want to extend the battery life of their gadget can enable the feature themselves whenever they wish. However, iOS offers to activate the power saving mode when the battery drops below 20%.
Adding Low Power Mode to Control Center
After all, yellow signifies caution or warning in other areas of our lives. Thanks for reading and don't forget to pay it up front. It's green when it's fully charged, red when it's nearly empty, and white or black at other times, depending on the background color of your screen. In the next tutorial, we'll show you where to find the low power mode so you can turn it off and not hit the battery icon. This screen looks like the image below. Whether or not the yellow battery indicator appeared, because low power mode was enabled in this pop-up menu or the manual method, the method to turn it off is the same.
In this case, the indicator turns yellow, confusing some. When connected to a power source, the mode remains active until the battery level reaches 80%, after which it automatically turns off. In case the function was activated manually (after 80%), it remains enabled even when the battery is fully charged.
Why is the charging indicator on the iPhone turned yellow?
This will cause the battery life to expire faster than when low power mode is enabled. However, you can make some adjustments that will help improve battery life if you are not in low power mode, for example. Open the "Settings" menu. Scroll down and select the "Battery" option. Step 3: Press the button to the right of Low Power Mode to disable the setting. The battery icon should no longer be yellow.
How to disable power saving mode
There are two ways to deactivate the function and get rid of the yellow icon. First, you can put your iPhone on charge and wait until the battery level reaches at least 80%. In this case, the mode will turn off automatically, and the indicator will turn green again.
Secondly, you can turn off the power saving mode yourself. To do this, open the section " Battery" in the application " Settings” and move the lever to the position “ off" against " Power saving mode».
As mentioned earlier, you will likely see a decrease in battery life after turning off Low Power Mode.
- Scroll down and select the Battery option.
- Turn off low power mode.
Percent percentage automatically results in a yellow screen
Sometimes it is white, sometimes red, but also black or yellow. We will tell you when the battery indicator turns yellow and how it turns white again. During the day, it may happen that the battery is discharged in a one-digit percentage range, and the white battery indicator suddenly turns yellow. This is included when it comes to getting the last minutes. When using a 20% battery, the first time a message appears on the display, a reminder to turn on the power saving mode will appear.
Keep in mind that Power Saving Mode significantly extends battery life, and if you don't mind turning off some features, it will allow you to use your iPhone and iPad for much longer. In addition, this mode is the only effective way to increase the battery life of devices running iOS 9 and later.
Anyone who refuses to do so will be reminded of ten and five percent of the battery's capacity. In this case, the display brightness becomes unavailable, emails are not downloaded automatically, automatic download is suspended and can no longer be activated when calling. If you think this mode doesn't have much effect, you should check out Matt Birchler's blog. He learned that with the current economy mode, the battery was 38.7% slower, so you expect over a third of battery life.
Depending on usage, this could mean plus a few hours. You can also activate the power saving mode manually. Go to "Settings", click "Battery" and press the control button to the right to activate the mode. When the battery indicator reaches 80 percent, the mode will automatically turn off unless you have manually activated the mode. Don't worry, this is only a power saving mode. Unlimited data packages are rare and usually come with rather high prices.
Surely every owner of the iPhone and iPad at least once wondered why the battery level indicator turns yellow from time to time. The answer is extremely simple - the yellow indicator means that the device is in power saving mode. What is it and how to return the usual charge indicator?
What is power saving mode?
Power Saving Mode is a useful feature in iOS that allows you to save battery life. When the battery is low (from 20% and below), it automatically offers to change some settings in order to reduce power consumption (dimming the screen, turning off new email notifications, deactivating the "Hey Siri" function, etc.). This mode significantly extends battery life, as indicated by the yellow color of the indicator.
Users who want to extend the battery life of their gadget can enable the feature themselves whenever they wish. However, iOS offers to activate the power saving mode when the battery drops below 20%.
In this case, the indicator turns yellow, confusing some. When connected to a power source, the mode remains active until the battery level reaches 80%, after which it automatically turns off. In case the function was activated manually (after 80%), it remains enabled even when the battery is fully charged.
How to disable power saving mode
There are two ways to deactivate the function and get rid of the yellow icon. First, you can put your iPhone on charge and wait until the battery level reaches at least 80%. In this case, the mode will turn off automatically, and the indicator will turn green again.
Secondly, you can turn off the power saving mode yourself. To do this, open the "Battery" section in the "Settings" application and move the lever to the "off" position. next to "Power Saving Mode".
Keep in mind that Power Saving Mode significantly extends battery life, and if you don't mind turning off some features, it will allow you to use your iPhone and iPad for much longer. In addition, this mode is the only effective way to increase the battery life of devices running iOS 9 and later.
