Depending on the specifics of the internal structure of various equipment and machinery (for example, milling or grinding machines, cars, etc.), a wide variety of types of drive belts are on the market to ensure their performance. Such rubber products include: wedge, poly-wedge, gear, flat and other models. The last type of belts is one of the most common in the world, because it has a number of advantages.
The main advantages of drive belts for machines of various types
Compared to toothed belts, flat belts have a number of additional advantages. Among the main advantages of such RTI should be noted:
- simple shape and low cost;
- smoothness and noiselessness;
- almost complete absence of vibration and shocks.
The most important advantage of flat belts is the ability to smooth out jerks at high speeds. This is possible due to the special shape of the product. The fact is that flat drive belts for machine tools cannot quickly catch on the pulley (slippage occurs at the time of starting), so this process occurs gradually.
The company "Holzer Flexo" sells a variety of rubber products. The cost of products sold is on average lower than that of competitors, and the geography of the main production forces is located evenly across Russia, which saves time on order transportation.
Flat belts are quite commonly used as ordinary drive belts for low, medium and high load transmissions.
As for consumer properties, they are as follows:
- These belts are highly durable;
- Due to its elasticity, there is no need for additional stretching;
- Holds well and has high wear resistance;
- Perfectly tolerates any chemical and climatic factors;
Now let's talk about the benefits of using flat belts:
- The belt has a smooth, vibration-resistant factor;
- Reduces the shock wave by distributing it along the entire length of the belt, which is achieved due to the elasticity of the tape;
- Flat belts do not require any maintenance at all, which is an indication of its reliability and ease of operation;
- The discussed belts have good durability, due to the fact that the belts are elastic, they themselves work for a long time and at the same time soften the load on the other mechanisms of the equipment, which also extends the life of the equipment in general.
Specifications for drive flat belts
Thickness/ min. Pulley diameter, mm |
Strength, N/mm width |
Modulus at 1% elongation, N/mm width |
Surface type |
Note |
|
Flat drive belts for light/fast gears or for transportTextile surfaces (impregnated or with a thin rubber coating), including spindle tapes. |
|||||
Belt flat KHST-50 |
fabric/fabric |
Spindle tape/transport |
|||
Belt flat KHST-51 |
fabric/fabric |
Spindle tape/transport |
|||
Belt flat KHST-80/15 |
fabric/fabric |
Transport |
|||
Belt flat KHST-80/25 |
fabric/fabric |
Drive/transport |
|||
Belt flat KHST-90 |
fabric/fabric |
Drive/transport |
|||
Belt flat KHST-90G |
Fabric/rubber |
Drive/transport |
|||
Belt flat FNF-3 |
fabric/fabric |
Light drives/transport |
|||
Belt flat FNF-6 |
fabric/fabric |
Light drives/transport |
|||
Belt flat FNF-100 |
fabric/fabric |
Light drives/transport |
|||
Flat drive belts for most light to medium duty gears or for transport(rubber/fabric or rubber/rubber) |
|||||
Profile KHS-F0 |
Fabric/rubber |
Light drives/transport |
|||
Profile KHS-F1/12 |
Fabric/rubber |
Light drives/transport |
|||
Profile KHS-F1/17 |
Fabric/rubber |
Light drives/transport |
|||
Profile KHS-1 |
rubber/rubber |
Light drives/transport |
|||
Profile KHS-1/20 |
rubber/rubber |
||||
Profile KHS-1/30 |
rubber/rubber |
Folder Gluers |
|||
Profile KHS-1/40 |
rubber/rubber |
Folder Gluers |
|||
Profile KHS-2/30 |
rubber/rubber |
General purpose drive |
|||
Profile KHS-2/60 |
rubber/rubber |
Folder Gluer |
|||
Profile KHS-3/30 |
rubber/rubber |
General purpose drive |
|||
Profile KHS-3/40 |
rubber/rubber |
Drive with increased abrasion |
|||
Flat drive belts for heavy duty machines2 way power transmission with high speeds To drive roller conveyors. |
|||||
Profile KHS-140T |
rubber/rubber |
Drive/transport |
|||
Profile KHS-2T |
rubber/rubber |
Textile machines, etc. |
|||
Profile KHS-A2T |
rubber/rubber |
Textile machines, etc. |
|||
Profile KHS-250T |
rubber/rubber |
Textile machines, etc. |
|||
Profile KHS-251T |
rubber/rubber |
Textile machines, etc. |
|||
Profile KHS-A3T |
rubber/rubber |
Textile machines, etc. |
|||
Profile KHS-390T |
rubber/rubber |
Textile machines, etc. |
|||
Profile KHS-391T |
rubber/rubber |
Textile machines, etc. |
|||
Profile KHS-A4T |
rubber/rubber |
Textile machines, etc. |
|||
Profile KHS-570T |
rubber/rubber |
Heavy/Powerful Drives |
|||
Flat belts with leather coversfor heavy starting (jerk) or for work in an oil mist environment; drawing machines for the cable industry, variators with tapered pulleys, etc. |
|||||
Profile KHA-6T |
Skin/leather |
Light/medium drives |
|||
Profile KHC-2A6T |
Fabric/leather |
Medium drives |
|||
Profile KHC-3A10T |
Fabric/leather |
Medium drives |
|||
Profile KHC-A40T |
Fabric/leather |
Powerful drives |
Main Applications
INDUSTRIES |
TYPES OF MACHINES |
TEXTILE |
Carding, roving, tape, spinning, etc. Pneumatic and high speed spinning Spindle tapes for ring spinning machines Rope-twisting, longline-twisting and double-twisting machines Automatic winders Drum dryers and brush cleaners |
FLOUR AND BAKERY |
Brush washing machines Mill roller machines Leavers, cleaners and blowers dough mixers |
POULTRY PROCESSING |
Plucking lines |
MEAT AND CANNING |
Cutter drive, tin can lines |
DAIRY |
Milk Dryer Sprayers |
TOBACCO |
Drives, traction and transport belts, incl. seamless |
PACKAGING AND PACKAGING |
Tension belts with soft rubber and increased coefficient of friction for packaging films |
MANUFACTURE OF CARDBOARD AND FILM PACKAGING, PRINTING |
Printing machines, die-cutting presses Folder Gluers, Folding Box Making, Soft Rubber Feeders Welding machines for making bags |
PAPER PRODUCTION |
Conveyors for self-tapping and slitting machines Bag making and paper bobbin winding machines |
WOODWORKING |
Shape-milling, 4-sided, circular saw, shaving and tenoning machines Sawmills, chipboard production, etc. |
METALWORKING |
Lathes Grinding machines Precision drilling, etc. |
DIFFERENT INDUSTRIES |
Press for car bodies Extruders Generators Centrifugal and pneumatic pumps Fans |
Buy flat drive belts Moscow
We offer quality belts with a guarantee of long-term operation, as our products are the standard of quality. Cooperating with the manufacturer directly, you are guaranteed to get the best prices for all our products. For more information about our flat belts, please contact our consultants by phone, which are listed in our contacts.
The company "RUSIMPORT RTI" has been supplying parts and spare parts for conveyor and transport equipment for many years. We are always ready to deliver any equipment to your facility, as well as help you repair your parts and mechanisms. In our product catalog you can find the following products, which are designed for different types of conveyors:
Conveyor belts;
Conveyor belts;
Drive belts;
Flat belts;
conveyor chains;
Grids transporting;
Mechanical connectors;
Reducers and motors;
Composite sleeves for NGOs;
Vulcanizing presses;
Consumables;
Bearings;
Rubber technical plate;
silicone products;
PVC products;
Pulleys and more.
You can learn more about each component of the conveyor in the relevant section or contact our specialists. If you need any advice, then just call our consultants at the numbers listed in our contacts, and they will be happy to advise you and answer all your questions. We deliver goods to any point of the Russian Federation in exactly the time specified in advance.
Belts for machine tools are an important element in the operation of equipment. This technical detail is an indispensable element of the machine:
drilling;
woodworking
turning;
milling;
format-cutting;
LLC "Holzer" manufactures and sells belts for machine tools of various types. Our products can be bought in such cities as Moscow, Lyubertsy, Podolsk, Novosibirsk. Russia is an industrial country. Therefore, our products are in great demand. The price for it is quite low, despite the fact that the quality of products meets all modern standards and norms. If you want your machines to run consistently and smoothly, you should definitely buy our belts. It doesn't matter what equipment you have. We produce belts for drilling, woodworking (“Master Universal 2000”, etc.), turning, grinding and other types of machines.
The tapes we produce are of the highest quality. Therefore, with our products, your machines will run like clockwork.
Product Main Features
The catalog presented by us contains all the drive belts for machines of various types. And there are many of them. You can buy drive belts for almost any type of machine from us. Our range is huge. We produce various types of tapes.
Drive belts for machine tools are needed primarily to transmit torque from one shaft to another using pulleys. Such products are used in a huge number of various mechanisms. Their working surface is on the side. Various types of these products are produced. Drive belts for machine tools are: wedge, flat, toothed, round, wedge-shaped, balancing.
For example, V-belts are used in agricultural machines, various industrial units, etc. They are also used in modern urban transport. V-belts for machine tools are made of cordon fabric, which is coated with layers of rubber. The main layer is located between the longitudinal parts of the fibers. The price of such products may vary, depending on the model and manufacturer.
Flat belts for machine tools are used in almost every industry. They are necessary to ensure the rotation of the pulleys, increase the accuracy and synchronization of work. Flat belts for machine tools have excellent performance. Their tape tolerates vibrations well and operates almost silently. Flat products have proven themselves in many industries. In addition, their price is acceptable. Therefore, buying flat belts for machine tools will not be very expensive. Especially in the company "Holzer" LLC.
Toothed belts for machine tools combine the features of a belt and chain drive. The belt rotates very smoothly. Timing belts for machine tools create rotation without slipping effect. Thus, their efficiency is higher than that of conventional products. Thanks to such belts, the load on the machine shaft will be significantly reduced.
Round machine belt can be used for small machines with low power. Although the scope of its application is quite wide. Round machine belt can be used in a wide variety of gears. They are equipped with a wide variety of installations, devices and mechanisms. The round belt for the machine does not lose its performance at air temperatures from - 60 C to + 80 C. Thus, it can be used in almost any temperature regime. Round products have a low cost. Their price depends on the manufacturer of the product. You can buy various types of such products from us.
V-shaped machine tape belts have their own scope - CVT systems. They work great. These products have shown their reliability and efficiency. CVT transmissions cannot function without them. They are an integral part of the whole mechanism. CVT gearboxes are among the most reliable and efficient.
In lathes, tape machine belts are used quite widely. Their use is primarily due to their quality. A tape made from high quality materials will last a long time.
Our advantages
Sale of belts for machine tools is the main activity of Holzer LLC. The price list contains various types of products (flat, round, etc.). Our online store offers a variety of tapes for machine tools and other equipment. You can order and buy almost any belts from us.
We produce belts for both large industrial equipment and small lathes. The price of the product is quite low. Since we are a manufacturer of our own products, their cost is significantly lower than that of most of our competitors. Therefore, it will be easy to buy our products.
If you need professional advice, you can always contact our staff. They will answer all your questions. They will tell you in detail about our products and help you make the right choice. This way you can get exactly what you really need. You don't have to overpay and buy a useless thing. The quality of the equipment is high. Products comply with all international norms and standards. Its operation is reliable and durable.
To place an order, just contact our staff. They will issue it as soon as possible. You will be able to receive your purchase quickly and without delay. We have been on the market for a long time. During our existence, we have established ourselves as a reliable and inexpensive supplier. Many of our customers have already seen this and use our products, which are distinguished by the highest performance. Therefore, working with us is profitable, convenient and comfortable!
www.rk-rti.ru
Flat drive belts
Optibelt flat belts
for machines and devices.
Assortment of flat belts
Installation and maintenance of flat belts
Belts flat endless
The production of flat belts for machine tools and equipment meets the highest requirements. High-quality belts increase the reliability and productivity of equipment, do not require special maintenance.
Application: textile industry, industrial machines, sawmills and chipboard machines, centrifugal and pneumatic pumps, roller mills, stone processing lines, generators and fans, drum milk dryers, baking powder and dough mixers
Flat endless cord belts (type I, II, III):
Main differences and advantages: Flat drive belts allow you to smooth out jerks (torque surges) during heavy starting at high speeds, due to initial slippage and gradual engagement with the drive pulley. Flat drive belts absorb machine oils and greases to a large extent, thereby ensuring power transmission without loss of friction coefficient for a long time. Flat drive belts are easy to operate and have a long service life. Flat endless cord belt with double-sided fabric lining (type II) Flat endless cord cord belt with one-sided fabric lining (type I)
Flat endless cord belt without fabric lining (type III)
Flat belt parameters, mm Length (L) 1000 ÷ 5600 Width (W) 25 ÷ 200 Thickness (t) 2.2 ÷ 6.0
Flat belts based on polyamide fabrics
Flat belts with a polyamide core have replaced the classic flat rubber-fabric belts. The pulling layer of the flat belts is polyamide with its high tensile strength and high load capacity, with virtually no residual elongation. Various elastomers and leather are used for the working sides of flat belts. Flat-belt transmissions using flat belts with a polyamide core are characterized by quiet operation, synchronous rotation accuracy and high efficiency.Flat belts with a p / a core are resistant to oils, fats and other solvents, have high wear resistance and significant tensile strength. fabrics
Application of flat belts with p / a core:
transmission of high power in classic and multi-pulley transmission transmissions; in packaging machines; in the paper and textile industry as tangential belts; for cutting tools and machine tools; for loading devices.
Flat drive belts (based on a traction polyamide core) for power transmission from the world's leading manufacturers, offered to your attention, can be bought both for cash and cashless payments. These belts are designed to work in power drives of industrial equipment. Flat drive belts can be used for heavy duty and high tension applications such as main drives of roller flour mills, paper machines, stone cutting and stone crushing machines, sawmills, stamping presses in metalworking, etc.
Main differences and advantages:
Flat drive belts smooth out jerks (torque surges) during heavy starts at high speeds, due to initial slippage and gradual engagement with the drive pulley. Flat drive belts absorb machine oils and greases to a great extent, thereby ensuring power transmission without loss of friction coefficient for a long time.
Flat drive belts are easy to operate and have a long service life.
KHST-51 | India | 0.6 | 0 | textile | textile | 10 | 90 | 1.5 | -- |
TP-5 | Türkiye | 0.7 | 0 | PA fabric | PA fabric | 15 | 90 | 4 | Yellow - Green |
KHS-20FBG | India | 2 | 0 | rubber | textile | 40 | 120 | 3 | -- |
KHST-80 | India | 0.9 | 0.25 | textile | textile | 20 | 100 | 2.3 | -- |
PS-55 | India | 0.9 | 0.25 | cotton fabric | rubber | 20 | 100 | 2.3 | -- |
KHST-90 | India | 1.2 | 0.25 | textile | textile | 20 | 100 | 2.3 | -- |
KHST-90G | India | 1.2 | 0.25 | textile | rubber | 20 | 100 | 2.3 | t.Green-Black |
FNF-3 | India | 0.9 | 0.25 | textile | textile | 20 | 100 | 2.3 | t.Zel. |
TT4 | Türkiye | 1.2 | 0.25 | textile | textile | 15 | 90 | 4 | Green-Green |
FNF-30 | India | 0.9 | 0.25 | textile | textile | 15 | 90 | 4 | t.Zel. |
KHS-F0 | India | 1 | 0.25 | textile | rubber | 20 | 80 | 2.3 | Green-Green |
TG4FSTR | Türkiye | 1.1 | 0.2 | rubber | rubber | 20 | 90 | 4 | Green-Black |
PF-0 | India | 0.9 | 0.2 | textile | rubber | 20 | 80 | 3.0 | Green-Green |
FNF-6 | India | 1.1 | 0.4 | textile | textile | 30 | 150 | 3.5 | -- |
TT6 | Türkiye | 1 | 0.4 | textile | textile | 20 | 135 | 6 | Green-Green |
FNF-60 | India | 1 | 0.4 | textile | textile | 20 | 190 | 3.8 | Green-Green |
KHS-F1/1.2 | India | 1.2 | 0.4 | textile | rubber | 30 | 150 | 3.5 | Green-Green |
TG4 | Türkiye | 1.2 | 0.4 | rubber | textile | 20 | 90 | 4 | Green-Black |
PF-1 | Japan | 1.3 | 0.4 | textile | rubber | 30 | 150 | 5 | Green-Green |
KHS-A1 | India | 1.4 | 0.4 | textile | rubber | 30 | 150 | 3.5 | Green-Green |
TG6 | Türkiye | 1.2 | 0.4 | rubber | textile | 20 | 135 | 6 | Green-Black |
KHS-F1/1.7 | India | 1.7 | 0.4 | textile | rubber | 30 | 150 | 3.5 | Green-Green |
RNF-60/1.7 | Japan | 1.7 | 0.4 | textile | rubber | 30 | 150 | 5 | t.Green-Green |
KHS-F1/20 | India | 1.2 | 0.4 | textile | rubber | 30 | 150 | 3.5 | -- |
KHS-1 | India | 1.5 | 0.4 | rubber | rubber | 30 | 150 | 3.5 | Yellow - Green |
GG6 | Türkiye | 1.5 | 0.4 | rubber | rubber | 25 | 135 | 6 | Green-Green |
P-1 | Japan | 1.5 | 0.4 | rubber | rubber | 30 | 150 | 5 | Salad.-Yellow. |
PS-140 | India | 1.7 | 0.4 | rubber | rubber | 25 | 190 | 3.8 | t.Green-Yellow. |
PS-140T | India | 1.7 | 0.5 | rubber | rubber | 30 | 225 | 5 | t.Green-Yellow. |
KHS-140T | India | 1.7 | 0.4 | rubber | rubber | 30 | 200 | 6 | Syn.-Ser. |
GT14 | Türkiye | 1.7 | 0.4 | rubber | textile | 50 | 315 | 14 | Green-Black |
KHS-140 | India | 1.7 | 0.4 | rubber | rubber | 40 | 150 | 3.5 | t.Green-Yellow. |
KHS-1/30 | India | 3 | 0.4 | rubber | rubber | 40 | 150 | 3.5 | Salad.-Yellow. |
KHS-1/30T | India | 3 | 0.4 | rubber | rubber | 50 | 180 | 4 | Syn.-Syn. |
GG10/3 | Türkiye | 3 | 0.4 | rubber | rubber | 30 | 225 | 10 | Green-Green |
PT-30 | India | 3 | 0.4 | rubber | rubber | 30 | 190 | 3.8 | Salad.-Yellow. |
KHS-1/40 | India | 4 | 0.4 | rubber | rubber | 50 | 150 | 3.5 | Salad.-Yellow. |
KHS-1/40T | -- | 4 | 0.4 | rubber | rubber | 60 | 180 | 5 | Syn.-Syn. |
GG10/4 | Türkiye | 4 | 0.4 | rubber | rubber | 30 | 225 | 10 | Green-Green |
PT-40 | India | 4 | 0.4 | rubber | rubber | 50 | 180 | 5 | Salad.-Yellow. |
KHS-1/60T | India | 6 | 0.4 | rubber | rubber | 80 | 180 | 4 | Syn.-Syn. |
F35/28 | Italy | 2.8 | 0.4 | textile | leather | 35 | 200 | 3.5 | Green-Ser. |
KHC-A6 (LT6) | India | 2.5 | 0.4 | textile | leather | 35 | 190 | 3.8 | Red-Ser. |
KHC-A6T | India | 2.5 | 0.5 | textile | leather | 35 | 225 | 5 | Red-Ser. |
KH-A6T | India | 3.5 | 0.5 | leather | leather | 40 | 225 | 5 | Ser.-Ser. |
KHS-140 | India | 2 | 0.5 | rubber | rubber | 30 | 150 | 3.8 | Green-Yellow |
KHS-1/20 | India | 2 | 0.6 | rubber | rubber | 40 | 160 | 4 | Salad.-Yellow. |
P-2 | India | 2 | 0.6 | rubber | rubber | 40 | 160 | 4 | Salad.-Yellow. |
P-3 | India | 3 | 0.6 | rubber | rubber | 60 | 150 | 4 | Salad.-Yellow. |
PT-40IG | India | 4 | 0.6 | rubber | rubber | 60 | 150 | 4 | Green-Yellow |
KHS-2 | India | 2.2 | 0.8 | rubber | rubber | 60 | 300 | 7 | Salad.-Yellow. |
KHS-2T | India | 2.3 | 0.8 | rubber | rubber | 60 | 320 | 7.5 | Syn.-Ser. |
GG14 | Türkiye | 2 | 0.8 | rubber | rubber | 60 | 320 | 7.5 | Green-Green |
KHS-2XT | Japan | 2.3 | 0.8 | rubber | rubber | 60 | 320 | 7.5 | Black-Black |
RNR-100/23T | India | 2.3 | 0.8 | rubber | rubber | 60 | 315 | 7.5 | Black-Black |
PS-2 | India | 2.3 | 0.8 | rubber | rubber | 60 | 300 | 7 | t.Green-Yellow. |
KHS-2/30 | India | 3 | 0.8 | rubber | rubber | 60 | 300 | 7 | Salad.-Yellow. |
PS-3 | Japan | 3 | 0.8 | rubber | rubber | 60 | 300 | 7 | t.Green-Yellow. |
KHS-2/40 | India | 4 | 0.8 | rubber | rubber | 60 | 300 | 7 | Salad.-Yellow. |
PS-4 | Japan | 4 | 0.8 | rubber | rubber | 60 | 300 | 7 | Green-Yellow |
KHS-2/60 | India | 6 | 0.8 | rubber | rubber | 60 | 300 | 7 | Salad.-Yellow. |
PS-6 | Japan | 6 | 0.8 | rubber | rubber | 60 | 300 | 7 | -- |
KHC-2A6 (LT14) | India | 3.1 | 0.8 | textile | leather | -- | -- | -- | -- |
KHC-A10 | India | 3.2 | 0.8 | textile | leather | -- | -- | -- | -- |
KH-A10 | India | 4.6 | 0.8 | leather | leather | -- | -- | -- | Ser.-Ser. |
LNL-100 (LL14) | Japan | 4.8 | 0.8 | leather | leather | -- | -- | -- | Ser.-Ser. |
KHS-3 | India | 3 | 1 | rubber | rubber | 100 | 400 | 10 | Salad.-Yellow. |
POE-250T | Japan | 2.6 | 1 | rubber | rubber | 100 | 430 | 11 | t.Green-Yellow. |
KHS-250T | India | 2.6 | 1 | rubber | rubber | 90 | 430 | 11 | Syn.-Ser. |
PS-250T | Japan | 2.6 | 1 | rubber | rubber | -- | -- | -- | t.Green-Yellow. |
PS-251 | -- | -- | 1 | rubber | rubber | 100 | 400 | 10 | -- |
PS-251T | Japan | -- | 1 | rubber | rubber | 100 | 430 | 11 | -- |
KHS-251T | Japan | 3 | 1 | rubber | rubber | 100 | 430 | 11 | -- |
KHS-3/40 | India | 4 | 1 | rubber | rubber | 100 | 400 | 10 | -- |
KH-2A6 (LL14) | India | 5 | 1 | leather | leather | -- | -- | -- | Syn.-Ser. |
KH-A10T | India | 5.2 | 1 | leather | leather | -- | -- | -- | Syn.-Ser. |
LT20 | -- | 3 | 1 | leather | textile | -- | -- | -- | -- |
LL20 | Slovenia | 4.8 | 1 | leather | leather | -- | -- | -- | Syn.-Ser. |
P-5 | Japan | 5 | 1.2 | rubber | rubber | 120 | 400 | 10 | Salad.-Yellow. |
KHS-3/50 | India | 5 | 1.2 | rubber | rubber | 120 | 400 | 10 | Salad.-Yellow. |
KHS-391 | India | 4 | 1.5 | rubber | rubber | 150 | 600 | 15 | Salad.-Yellow. |
KHS-390T | Japan | 3.3 | 1.5 | rubber | rubber | 150 | 650 | 17 | Syn.-Ser. |
GG33 | -- | -- | 1.5 | rubber | rubber | 150 | 650 | 17 | -- |
PS-391 | Japan | 4 | 1.5 | rubber | rubber | 150 | 650 | 17 | t.Green-Yellow. |
PS-391T | Japan | 4 | 1.5 | rubber | rubber | -- | -- | -- | -- |
KHC 2A10 | -- | -- | 1.5 | -- | -- | -- | -- | -- | -- |
KH-2A10 (LL20) | India | 4.8 | 1.5 | leather | leather | -- | -- | -- | Syn.-Ser. |
KHC-3A10 | -- | 5.2 | 2.4 | textile | leather | -- | -- | -- | -- |
KH-3A10 | -- | 7.5 | 2.4 | leather | leather | -- | -- | -- | Syn.-Ser. |
KHC-4A10T | India | 6.2 | 3 | textile | leather | -- | -- | -- | -- |
KHS-A2T | India | 3 | 0.5 | rubber | rubber (pr/c) | 70 | 320 | 8 | Green-Black |
KHS-A3T | India | 3.5 | 1 | rubber | rubber (pr/c) | 120 | 430 | 11 | Green-Black |
KHS-A4T | India | 5 | 1.5 | -- | rubber (pr/c) | 250 | 750 | 21 | Green-Black |
KHS-A5T | India | 5.2 | 3 | -- | rubber (pr/c) | -- | -- | -- | Green-Black |
Esband Seamless Flat Drive Belts
Esband NE series seamless belts: neoprene (high quality chloroprene rubber) working cover has proven itself in the drives of woodworking equipment. In particular, seamless belts of the NE series on the spindle drives of 4-sided moulder planers from Weinig are widely known as original ("native") components from the model ranges of the Unimat - Powermat - Hydromat series, as old releases (sometimes, 20-30 years ago) and new ones, regardless of the number of spindles (this includes all WACO modifications).
It is also very useful for end users to know that NE22, NE26 belt types are suitable for the vast majority of 4-sided planers on the Russian market, regardless of brand, country of origin, number of spindles, and other possible modifications (both Western and Asian ТМ Winner, Beaver, Nortec, and many others).
The basic range of warehouse types is given in the table below, and, starting from the power on the spindle of 17-22 kW, we recommend using only the NE18 type, as the most reliable and having a minimum elongation in operation:
All Esband seamless belts are antistatic, resistant to industrial oils, greases, gasoline, have a constant coefficient of friction, high wear resistance, and are quiet in operation. Our extensive stock of this series includes more than 100 lengths, in 10mm increments, and taking into account a nominal length tolerance of +/- 0.5%.
Types of belts from this series NE21 and NE22 are ideal for driving scoring saws of machines of different functionality, sharpeners, grinders for various purposes in metalworking. As a rule, in such transmissions, the width of the belts does not exceed 30 mm (often less), with an unfolded length of not more than 1000 mm. (usually from 400 to 700 mm).
Since the belts of this series have transverse flexibility, for self-centering of the belt when operating at high speeds, it is optimal to bombard at least one drive pulley in the transmission (if the pulleys are not equipped with limiter flanges). For some types of transmissions (including transport) it is important to grind one or both sides of the belt as an additional option.
In order to optimally match flat seamless belts in a specific power transmission, the following parameters must be provided:
Engine power, (kW) diameters of driving and driven pulleys (mm) center distance of pulleys (mm) - with more than 2 pulleys. circumferential speed of the driving pulley (rpm) operating conditions (temperature, dust, oil, etc.) the presence of frequent drive starts (including a sharp jump in torque to maximum) and / or sharp braking.
To calculate complex gears, especially in cases where the belts work on both sides, a kinematic diagram with reliable center distances and pulley wrap angles is required.
ark22.ru
Company "Mashdetal"
For more than 15 years, our company has been operating on the Russian market. We specialize in drive belts, bearings and conveyor belts. The specialization is quite narrow, but in each section there are a huge number of nuances that seriously affect the final product and which you need to understand. Here, of course, professional knowledge and skills are needed.
We carry only premium brands Optibelt, SKF, Habasit, FAG, INA, NSK, Timken, thereby offering our customers only the highest quality products. You can choose any of the brands, go to the corresponding page and get the necessary information. If something is not clear or something is not understood, we will help you.
The site presents:
- Optibelt: all types of industrial and automotive belts, metal products (pulleys and bushings)
- SKF: the widest range of bearings, lubricants, seals and technical devices
- Habasit: all types of conveyor belts and flat drive belts
The list of our products is quite large: Optibelt belts, pulleys, technical accessories, bearings, conveyor belts, as well as flat belts of our own production.
Optibelt belts supplied by our organization are considered to be the highest quality parts on the domestic spare parts market. The following types of Optibelt drive belts are described in detail on the website:
Optibelt drive belts
- Drive belts for agricultural machinery;
- V-belts Optibelt;
- Polyclinic;
- CVT;
- Toothed belts Optibelt;
- Reinforced timing belts Optibelt;
- Multi-ribbed belts Optibelt;
- Snowmobile belts;
- Optibelt belts for pumping units;
Optibelt guarantees the reliability of its products. Tapes and drive belts from the manufacturer from Germany Optibelt are distinguished by the special reliability of materials; abrasion resistance; a wide range of withstand temperatures; long service life; ease of installation; smooth running, maintained during transmission; a wide range of transmitted powers and speeds of rotation of the pulleys; good indicators of stretching, elasticity, lack of sagging.
The drive belt from Optibelt is a well-thought-out complex design, created using the latest materials with different properties, advanced technologies in their processing and calculation of indicators that the belt reveals already in use. With this approach, many types of drive belts appear, each of which clearly corresponds to the task: reinforced toothed - for high power transmission, flat drive belts - for high-speed transmissions, multi-ribbed - for drives with the possibility of slipping the belt; gear for powerful and high-speed gears, etc.
Careful manufacturing of only high-quality raw materials makes Optibelt belts extremely wear-resistant, immune to mechanical (high temperatures, friction, shock, compression, stretching) and chemical (oils, fuels, lubricants) factors. In a word, belts from the Optibelt company are the best parts in terms of price-quality-durability ratio. You will also receive detailed advice by calling us or contacting one of the branches in the cities: Moscow, Krasnoyarsk, Orenburg, Tyumen, Kemerovo, Yekaterinburg and St. Petersburg. Here you can find the right drive belts and buy them at the best prices on the market.
Belts from "Mashdetal" - the main part of the production!
optbelt.ru
Belts are flat
A drive flat belt with a polyamide core is a product that occupies an important place in the machine-building market, as it is a traction element for water lifts, generators, mixers, harvester conveyors, baking powder and dough mixers. A flat drive belt can have two layers of friction, in which case it is called double-sided, it can be looped, in which case it is called endless.
- operating temperature range -50° +150° С.
- Belts do not stretch, have high efficiency and are able to work at high speeds and high powers.
- Belts with a polyamide core, coated with chrome-tanned leather, which are recommended for use in gears with strong peak overloads, are in high demand.
Belts flat CHIORINO:
TYPE Material Thickness (mm) Elongation 1%(N/mm)
Т60/30А Synthetic rubber 3.00 60.0
Т25/20Е Synthetic rubber 2.00 17.0
Т25/25Е Synthetic rubber 2.50 17.0
Т40/25Е Synthetic rubber 2.50 18.0
Т40/30Е Synthetic rubber 3.00 19.0
DG-E10/30 HS Synthetic rubber 3.00 15.0
DG-E10/40 HS Synthetic rubber 4.00 15.0
DG-E10/50 HS Synthetic rubber 5.00 15.0
DG-E10/60 HS Synthetic rubber 6.00 15.0
DU1/30W Polyurethane (TPU) 3.00 5.0
DU1/40W Polyurethane (TPU) 4.00 5.0
DU-E 10/30W Polyurethane (TPU) 3.00 15.0
DU-E 10/40W Polyurethane (TPU) 4.00 15.0
T0 HS Synthetic rubber 1.40 2.0
T1 HS Synthetic rubber 1.50 5.0
T1R HS Synthetic rubber 2.10 5.0
T2 HS Synthetic rubber 2.35 8.0
T2R HS Synthetic rubber 3.00 8.0
T3 HS Synthetic rubber 2.60 11.0
T3R HS Synthetic rubber 3.20 11.0
T4 HS Synthetic rubber 3.10 12.5
T4R HS Synthetic rubber 3.90 12.5
T6 HS Synthetic rubber 3.50 18.0
fields of application of flat polyamide belts
- car body presses
- sawmills and chipboard machines
- 4-sided shaping and milling machines
- circular saw, shaving and tenon cutting machines
- flat belts for machines: drilling, turning, grinding
- wire-twisting and longline-twisting machines
- double twist machines
- ring spinning and automatic winding machines
- paper bobbin winding machines
- carding, roving, spinning machines
- pneumatic and high speed spinning machines
- printing and folder-gluing machines
- die-cutting presses
- machines for the production of cardboard sleeves
- mill rollers and plucking lines
- drum milk dryers
- brush cleaners and brush washers
- baking powder and dough mixers
- cleaners and blowers
- folding box making machines
- cutter drives and tin can lines
- bag making welding machines
- self-tapping and slitting machines
- extruders
- generators
- fans
- centrifugal and pneumatic pumps
- mixers
- roller mills
- turbines
- stone processing lines
In order to order a belt that is right for you, we need to know the minimum diameter of the pulley or shaft on which the belt will operate, the length and width of the belt, and operating conditions. The dimensions of the belts can be limited only by the dimensions of the rolled material and range from 120 mm to 50,000 mm.
For belt prices, stock availability, belt production time, please contact our managers. The production time for belts is 1-3 weeks, and depends on the volume of the order, the availability of material in the warehouse, and the workload of production.
Application of drive belts in woodworking and metalworking
Drive belts for machine tools are widely used in the metalworking and woodworking industries. The drive belt can stand both on the drive of the main movement and on the feed drives and to ensure the transfer of rotation from the engine to the axle. At the same time, very often belts are used not only in universal machines, but also in machines with program numerical control (CNC).
Practically any types of belts are used in machines; as a rule, V-belts, poly-V-belts or variator belts are used to drive the main movement and the spindle, because these nodes usually do not require positioning and allow slippage. For feed or tool change drives, toothed belts are used, very often reinforced versions, feed drives must ensure high positioning accuracy of the working head and drive rigidity.
Polyurethane belts with metal cord are very often used in coordinate laser cutting and engraving, plasma cutting, milling machines for feed axes, they allow for high speeds of movement of the working tool and good positioning accuracy.
Drive belts are used in many types of metalworking machines to drive the main movement, feed drives, as well as to drive automatic tool change:
- Belts for laser and plasma cutting machines;
- Belts for lathes;
- Belts for milling machines;
- Belts for machining centers.
Especially a lot of belts are used in woodworking equipment, because. it does not impose ultra-high requirements on the rigidity and accuracy of the drives. Main knots:
- Belts for universal woodworking machines (single spindle);
- Belts for combined machines (multi-spindle), may include planer, thicknesser, milling, circular saw and drilling and grooving units;
- Belts for flooring production lines;
- Belts for sawmills.