When choosing a wheel for a Mazda car, special attention should be paid to the parameters of wheels and tires. For each car model, Japanese manufacturers use their individual standard sizes. For example, the factory equipment of the Mazda 6 assumes the use of 195/65 / R15 tires. Alternatively, you can use tires 205/50 / R17, 205/60 / R15, 225/40 / R18, 225/35 / R19.
Wheel sizes for Mazda 6 I GG
- an increase in the load on the hub bearings;
- loss of aerodynamic performance;
- decrease in vehicle stability.
In addition, such indicators as fuel consumption, handling and safety while driving a car depend on the choice of wheel sizes.
Before choosing a wheel for a Japanese car, you need to study its parameters:
- tire width;
- profile height;
- speed and capacity indices;
- tire pressure;
- diameter;
- departure;
- number of fasteners;
- types of fasteners;
- circle parameters;
- centering hole.
When choosing custom wheel sizes, you can use a tire calculator. This device is able to select the optimal sizes of disks and tires, wheel load index, taking into account the vehicle speed and the amount of ground clearance.
Wheel sizes for Mazda 6 GG version 2002-2008:
- thread diameter: 5.
The size of car tires for Mazda 6 GG
Here is a table where we indicate the indices of wheel load, speed, dimensions and pressure in tires on the GG version.
| Wheel Load Index | Tire parameters | Tire pressure kg / cm² | Speed index |
| 91 | 195/65 / R15 | 2.2 | V |
| 93 | 205 / 60R16 | 2.2 | V |
| Replacement | |||
| 91 | 215/45 / R17 | 2.2 | V |
| 91 | 215/50 / R17 | 2.2 | V |
| 89 | 215/45 / R18 | 2.2 | W |
| 91 | 225/45 / R18 | W | |
Wheels for Mazda 6 GG
| The size | Disc departure | |
| 5 × 114.3 | 6Jx15 | ET50 |
| 5 × 114.3 | 6.5Jx16 | ET55 |
| Replacement | ||
| 5 × 114.3 | 6.5Jx16 | ET55 |
| 5 × 114.3 | 7Jx16 | ET55 |
| 5 × 114.3 | 7Jx17 | ET55 |
| 5 × 114.3 | 7Jx17 | ET60 |
| 5 × 114.3 | 7Jx17 | ET60 |
| 5 × 114.3 | 7Jx18 | ET55 |
| 5 × 114.3 | 7.5Jx18 | ET60 |
Wheel sizes for Mazda 6 II GH
- 205 denotes the width of a car tire. This indicator is measured in millimeters and is determined by calculating the distance of the lateral edges of the inflated tire. This does not include protective belts;
- 60 shows the profile height of a tire, measured as a percentage of the width of an automobile tire. Thus, to determine the height, you need to know the ratio of 205 mm to 60%. As a result, we calculate the profile height: (60% / 100%) X 205 = 123 mm;
- R indicates the radiality of the tire. Translated from English, Radial is the radiality of a car tire. Thus, manufacturers assemble rubber and cord when creating a tire. Also, the letter D was used to designate the radiality. However, tires with this designation are practically no longer produced;
- 16 indicates the diameter of the rim center hole for which a car tire can be used. This indicator is indicated in inches.
Mazda 6 GH 2007-2012 model year:
- center hole diameter DIA: 67.1 mm;
- hub fastener: nut;
- thread: M12x5.
Additional information indicated on the side of the tire:
M&S (Mud and Snow) translated from English mud and snow: off-season and winter tires;
XL (Extra Load) a reinforced tire with a wheel load index exceeding by 3 units ordinary tires with similar standard sizes;
AW or AS off-season tires;
Symbol * indicates that the tire is intended for winter use. If this marking is not indicated on the side of the tire, then the rubber is used only for the summer period;
Inside, Outside- the inner and outer side of the asymmetric tire. Accordingly, when installing a wheel, the Inside inscription should be located on the outside of the rubber, and the Outside indicator on the inside of the tire;
Water, Rain, Aquatred, Aqua or an umbrella-shaped symbol indicates rain rubber;
Tubeless lettering- tubeless tire. If the inscription is absent, it means that the bus is used with the camera. Tube Type Indicator - Tire is installed with a tube only;
Arrow or inscription Rotation demonstrates the direction of the tread pattern. Indicated on the side of the tire.
Wheel sizes for Mazda 6 III GJ
For the Mazda 6 III GJ car, the standard disc size marking is used, as for other models of Japanese cars.
Before choosing a wheeled product, it is necessary to study the standard parameters of a factory-fitted autodisk 7.5 × 17 5 × 114.3 ET50 for the GJ version, where:
- 7.5 demonstrates its width in inches;
- the J symbol indicates the design, the shape of the flanges;
- the number 17 indicates the diameter of the disc fit. This indicator should correspond to similar parameters of the tire;
- 5 × 3 - PCD disc bolt pattern. The number 5 indicates the number of holes for fastening the nuts, 114.3 indicates the diameter of the PCD circle;
- ET50 marking indicates a disc overhang with an indicator of 50 mm. Reach is the distance from the rim mating plane to the middle of the wheel rim. The zone where the wheel rim is pressed against the car hub is called the seating plane.
The following information is attached to the marking of wheel rims on Mazda GJ 2012-2015:
Max Load indicates the maximum permissible wheel load;
ISO, TUV, SAE - classification standards for determining the quality of the disc, similar to GOST. For each product, one or another quality standard is indicated;
Center hole diameter DIA: 67.1 mm. This indicator should correspond to the diameter of the hub fit. For casting, manufacturers use a large centering hole. So that the wheels can be universal for all types of cars.
However, in this situation, the hub seating diameter and DIA differ from each other. Therefore, it is recommended to use a centered adapter ring as a connecting element.
The correct choice of wheel size also depends on the ability to determine the marking of the rim and tire. If the car owner does not know the marking designation, then the selected tires or wheels may not fit in size.
Wheel sizes for Mazda 6 III GL
The Mazda 6 GL version has been produced since 2015. Wheel parameters:
hub fastener: nut;
thread M12x1.5;
Tires for Mazda III GL
Wheels for Mazda III GL
Pay attention to the fact that the drill or bolt pattern indicates the fit of the rim diameter. In the operating instructions for cars, Japanese manufacturers indicate PCD, the landing diameter.
On Mazda cars, 3 different versions and editions use the same disc bolt pattern: 5 × 114.3. So this drill determines that the disc is 5 bolted and has a diameter of 114.3 mm.
Mazda 3 wheel sizes
| Diameter, R | Tire size | Disk departure, ET | Disc width, J | |
| 5 × 114.3 | R15 | 195/65/15 | 45-55 | 66.57.0 |
| 5 × 114.3 | R16 | 205/55/16 | 40-5540-5542-55 | 6.577.5 |
| 5 × 114.3 | R17 | 205/50/17215/45/17225/45/17 | 42-5545-5548-52 | 77.58 |
| 5 × 114.3 | R18 | 215/45/18225/40/18215/40/18 | 42-5542-5545-52 | 77.58 |
| 5 × 114.3 | R19 | 225/35/19225/35/19 | 45-5548-52 | 7.58 |
| 5 × 114.3 | R20 | 225/35/20 | 45-48 | 7.5 |
The parameters of the wheels on the Mazda 3 I and II are almost identical. The differences are that higher arches are installed on the second version of the car.
Thus, the Mazda 3 II BL can be fitted with wheels with an offset of 35 and a width of 8. Standard parameters are wheels of 16.17 inches with a diameter of 6.5 mm.
Wheels for Mazda 3 2013, III generation BM
| Drilling (PCD, bore diameter) | Diameter, R | Tire size | Disc width, J | Disk departure, ET |
| 5 × 114.3 | R16 | 205/60/16 | 6..5 | 50 |
| 5 × 114.3 | R17 | 205/50/17 | 7, 7.5 | 52.5 |
| 5 × 114.3 | R18 | 215/45/18 | 7, 7.5 | 50 |
| 5 × 114.3 | R19 | 215/35/19 | 8 | 50 |
| 5 × 114.3 | R20 | 235/30/20 | 8.5 | 45 |
Factory wheel sizes for Mazda 3 hatchback and sedan 2013-2017 model year are 16, 18 inches, depending on the configuration. Tires with standard sizes are installed: 215/45 / R18, 205/60 / R16.
Tire pressure on Mazda 3
When using R16 tires with a load of up to 3 passengers, the pressure of the front and rear wheels must be 2.5 bar. With a load of up to 5 passengers, the rear tire pressure is 3.2 bar and the front tire pressure is 2.8 bar.
R18 tires with a load of up to 3 passengers must have a pressure of 2.4 bar for the front wheels and 2.3 for the rear tires. Full load up to 5 passengers - rear wheel pressure 3 bar and front tire pressure 2.8 bar. Refer to the 3rd Generation Mazda 3 Owner's Manual for this information.
How to independently determine the drilling?
Wheel rim bolt determination method:
- the number of fasteners (bolts) is calculated from the holes located on the disc. For example, Mazda 3 has 5 holes in the disc;
- the calculation includes determining the distance between the inner walls of the holes and adding them to the resulting value of their diameter.
For example, having determined the number of bolts and the diameter of the holes, the car owner gets the value 5 × 114.3 for the Mazda 3.
An exception may be 18 inch wheels for the Mazda 3 with a front drive axle and an engine capacity of 2.0, as well as versions with all-wheel drive and a capacity of 2.5 liters.
Mazda CX5 wheel sizes
All configurations of the Mazda CX5, since 2012, use 17 and 19-inch alloy and steel wheels marked 17x7J ET50, 19x7J ET50:
- ET - disc overhang 50 mm;
- 7J - rim width;
- centering hole diameter - 67.1 mm and 5 holes for fastening bolts around the disk circumference 114.3 mm; PCD 5 × 3.
Wheels with non-standard parameters (- + 0.5) inches can be installed on the Mazda CX5.
Tires for Mazda CX5
If you use factory rims of 17, 19 inches, then for the CX5 model tires are selected with standard sizes: 225/55 / R19 / 99 V, 225/65 / R17 / 102 V. Marking designation:
- 225 - rubber width;
- 55.65 - profile height of the tire;
- 99.102 - index of carrying capacity from 750 to 850 kg;
- V - wheel speed index up to 240 km / h;
- R - radial tire design.
If you choose tires according to the capacity index, then you must take into account the fact that the estimated weight per person is 75 kg. As a last resort, you can calculate the number of passengers and install tires with high carrying capacity.
The car's wheel rim is attached to the hub assembly and is a conventional flywheel. 6. The drive of the wheel is provided by the energy generated by the engine. To spin a wheel with a larger mass, you need to spend more energy and, accordingly, more fuel. When a heavy wheel stops, the load on the vehicle's braking system increases. Therefore, many factors depend on the correctly selected parameters 6, such as comfort, handling, safety and efficiency.
Wheel size for Mazda 6
- Razorovka PCD, that is, the number of mounting holes and the diameter of the circle on which they are located - 5 × 114.3 mm.
- The diameter of the center hole DIA is 67.1 mm.
- Standard disc nut 12 x 1.5 mm.
The width, diameter and overhang of the disc may vary depending on the year of manufacture and modification.
Original light alloy 6 are designed specifically for this Mazda model and meet all recommended parameters. The exclusive design of five twin beams of various shapes emphasizes the dynamic and striking appearance of the vehicle.
What you must definitely remember
Therefore, it can be difficult to visually distinguish the PCD bolt pattern if the difference is 1-2 mm. Often a 5 × 112 disk is installed instead of a 5 × 114.3 disk. But even such a "penny" difference will not make it possible to tighten all the nuts to the end. As a result, the disc will not completely sit on the hub, and vibration and self-loosening of the nuts will occur during movement. Do not believe your eyes, pay attention to the markings!
CO diameter (DIA) - diameter of the central hole of the disc. Measured from the side of the disc adjacent to the hub. For the Mazda 6, this figure is 67.1 mm. The diameter of the center hole must match the bore diameter of the hub. The precise mating of the two parts ensures the centering of the rim and relieves the brake disc from vibrations. This is important, because, according to Mazda 6 GJ owners, regular brake discs tend to overheat and deform.
Universal alloy wheel manufacturers often have a larger center hole, and a specific vehicle requires a centering ring to be fitted to the hub.
Disc width
The size of the rims must match the size of the tire. And if the diameter of the disc and the diameter of the tire are the same, then difficulties arise with the width. In the disc marking, the width is indicated in inches, and the tire width in mm. When selecting, it is necessary to recalculate, or refer to the tables of correspondence between the sizes of tires and disks. The landing width of the Mazda disc 6 in 7 inches corresponds to the tire width from 200 to 225 mm.
Departure
The offset of the ET disc is the distance in millimeters from the vertical plane of symmetry of the disc to the plane adjacent to the hub. Typically, the offset is positive, but in some cases, the offset may be zero or negative. Departure affects the size of the wheelbase of the car, since the distance between the wheels depends on it.
Mazda 6 rims have a positive offset, for example, ET 50.
Diameter
The diameter is indicated in inches and exactly matches the rim diameter of the tire. The recommended diameter of Mazda 6 wheels is from 16 to 19 ″.
Type of
Modern wheel disks are manufactured in the following types:
- Standard steel wheeled. A budget option featuring a large unsprung weight. The discs have low corrosion resistance and durability. The advantage is maintainability.
- Light-alloy wheeled. They are made of light alloys, have an attractive appearance and are not subject to corrosion. According to the method of production, they are divided into cast and forged. Alloy wheels burst when hit in a large pit, forged ones withstand more severe blows.
Drilling
Disc drilling or bolt pattern, PCD (Pitch Circle Diameter) designation defines the diameter of the circle in mm along which the holes for mounting the disc are located and the number of these holes. For Mazda 6, this is standard 5 holes with a diameter of 114.3 mm.
In conclusion, a couple of tips:
- Even if you think that all the technical parameters are clear to you, it is better to buy wheels for Mazda 6 after consulting with professionals. This saves you unnecessary costs and adds safety on the road.
- Choose discs from trusted manufacturers. No copy can compare with the quality of a branded Mazda 6 Replica drive.
The looseness of the Mazda 6 wheel rims is a widespread parameter that denotes the way the wheel is attached to the chassis of the vehicle. This prevalence is due to the fact that most Japanese and Korean car manufacturers define identical sizes and parameters of wheels and tires, so that it is easier for motorists to choose. The razbotka disks "Mazda 6" are provided by the factory in one version and is equal to 5 × 114.3 regardless of generation. As for the wheels themselves, depending on the year of manufacture, they were installed in sizes from R15 to R19. By choosing and installing a set of wheels on a car, you can greatly improve the exterior design and obtain a high level of handling and stability.
If you need to make certain improvements in the appearance or technical characteristics of your Mazda 6 car model, you must select only spare parts and components from authorized manufacturers. Every car enthusiast knows that the wheels are the main part of the exterior. Most of the design depends on their size, color and shape. Not only the exterior of the car depends on the method of their manufacture, but also the driving qualities, which is much more important than the appearance. A vehicle with large rims looks more attractive than a similar one with small ones.
Mazda 6 bolt pattern, configurator
Improving the car's appearance is of course important, but it is not a top priority. For any type of transport, it is more important that changes in the original design do not reduce efficiency and resource. It is recommended to select only those spare parts and elements that would meet the factory specifications and safety requirements.
In addition to good looks, the installed wheels should be suitable for all parameters of wheel bolt pattern Mazda 6 2006, or any other model year. In addition, there must be full compliance with the established factory dimensions of the products. Inconsistency of the required parameters leads to incorrect and unsafe vehicle operation. Incorrectly chosen bolt pattern "Mazda 6" leads to the fact that the purchased discs simply do not fit, and they will have to be returned back. This gives the car owner unnecessary trouble. There are ways, for example, using adapter rings - this allows you to install even unsuitable wheels. However, in this case, movement will be a constant risk to the safety of the driver and passengers.
With the change in the size and parameters of the rims, it is necessary not to forget about the correct selection of a new set of tires.
Pitch Circle Diameter (PCD) stands for Pitch Circle Diameter. The value implies the number of bolts that are used to attach the product to the undercarriage and the diameter of the circle on which the bolts are located in relation to each other. When choosing a new set of wheels, it is necessary to consider this parameter as carefully as possible. Otherwise, if you do not know, there is a big risk of buying unsuitable products. It doesn't matter who the manufacturer of the new discs is, it can be original models or products from any other manufacturer. All of them must correspond to the permissible parameters and dimensions.
This parameter can be measured independently. A simple ruler will suffice for this, but for maximum accuracy it is better to use a vernier caliper. There are no problems with the number of bolts, they are very easy to calculate visually. But with the size of the diameter, difficulties arise. It requires high measurement accuracy and knowledge of special formulas to determine the parameter. It is best to look at it in the official technological documentation for the vehicle or pick it up according to the tables presented on the Internet.
Incorrectly selected and installed wheels for any car is a high risk of a threat to the safety of the driver and passengers.
In the best case, low-quality products will increase the wear of parts and suspension assemblies, and in the worst case, it can cause an accident.
Mazda 6 latest generation Parameters for other models
The popular CX 5 from Mazda is a midsize crossover with increased weight compared to the sixth model. The importance of the disks is even greater for her than for the sedan. Therefore, it is very important to use only high quality and official products for improvement and tuning.
Note!
On "Mazda CX-5" discs are installed in only two sizes - R17 and R19.
In addition to the dimensions in terms of the diameter and width of the rim, there are no cardinal differences in parameters from the Mazda 6. It is necessary to consider what parameters of the bolt pattern "Mazda CX 5":
- 17-inch with parameters - 5 × 114.3; 7 × 17; ET50; d67,1. Tires 225/65 / R17;
- 18-inch with parameters - 5 × 114.3; 7 × 18; ET50; d67,1. Rubber 225/60 / R18;
- 19-inch, having parameters - 5 × 114.3; 7 × 19; ET50; d67,1. Rubber 225/55 / R19.
The Mazda CX-7 car is equipped with the following wheels:
- Rim diameter - 18 inches;
- Width - 7.5 inches;
- Fasteners - 5 bolts x 114.3 mm;
- Departure - 50 mm;
- The diameter of the central hole is 67.1 millimeters.
On a note.
In this case, the so-called wheel markings are indicated. On the original, it should be embossed on the inside.
It indicates:
- 5 × 114.3 - the number of mounting holes and the diameter of the circle of their location, or bolt pattern;
- 7 × 17 - disc width and diameter, measured in inches;
- ET50 - disc offset, measured in millimeters;
- d67,1 - hub diameter, also indicated in millimeters.
The offset of the wheel is the distance between the planes of application to the hub and the center axle. This parameter is most important for calculating the characteristics of the steering and chassis.
"Mazda CX-5" Departure parameters are specified by the vehicle manufacturer and must be strictly observed. A deviation in one direction or another entails a change in the loads on the chassis. This can lead to a change in steering sensitivity and possible emergency situations.
The hub diameter indicates the size of the disc center hole. It is measured in millimeters. If the selected set of wheels has a larger diameter, then it is necessary to purchase special adapter rings. They often come in a set.
Note!
Any deviations from the specified factory dimensions may affect steering performance and suspension wear.
Options for "Six"
As for the "Mazda 6", which was released in 2008, then when selecting disks for a car, the following are taken into account:
- The diameter of the rim, which is measured in inches.
- Rim width, also in inches.
- Outreach, measured in millimeters. This is the distance from the vertical axis of symmetry to the plane of contact between the hub and the disc.
- Number of holes for fastening with nuts and bolts, or just bolt pattern.
- Hole for the hub and its dimensions. Marked as DIA and represents the diameter of the center hole. Measured in millimeters.
Taking into account all the dimensions and parameters, the marking of the wheels can be distinguished:
- The bolt pattern, standard for Japanese manufacturers, is 5 × 114.3.
- Disc widths - 6.0, 7.0 and 7.5 J, depending on the radius, measured in inches.
- Departure of the disk - ET from 50 to 60, depends on the width, is measured in millimeters.
- The diameter of the central hole for the hub is d 67.1 millimeters.
For most of the lineup, Mazda engineers chose a bolt pattern of 5 × 114.3.
This makes it easy to select from a wide range of wheel rims on the market. There is an opportunity to choose both original products and products of various brands. The choice of sizes in width and diameter depends only on the personal preferences of the car owner. These dimensions are floating and subject to change. It is not recommended to change the bolt pattern and diameter of the center hole.
Mazda 6 is a passenger car from the Japanese concern of the same name.
Since the presentation of the Mazda 6 model and until the end of 2018, three generations have been released, namely:
- Mazda 6 GG from 2005 to 2007;
- Mazda 6 GH in 2010;
- Restyled version in 2011;
- Third generation in early 2012.
The changes affected not only the exterior, but also the interior, technical characteristics, power unit, transmission.
Sizes of standard wheels for generations of Mazda 6
| Mazda 6 (2002 - 2007) | |
|---|---|
| Original (tire) | 205/60 R16 |
| Replacement | 205/55 R17, 215/55 R18 |
| "Factory" complete set with disks | R16 5x114.3 6J ET50, (6.5J), (ET55) |
| Disk parameters | PCD: 5x114.3, DIA: 67.1, Nut: 12x1.5 |
| Replacement | R17 5x114.3 7J ET50, ET60, R18 7.5J |
| Mazda 6 (2008 - 2012) | |
| Factory complete sets | 205/60 R16 |
| Replacement | 205/55 R17, 215/55 R18 |
| --/-- | R16 5x114.3 6J ET50, R17 5x114.3 7J ET50 |
| Mazda 6 (2013 - 2015) | |
| Original | 225/55 R17 |
| Replacement | 225/45 R19 |
| Mazda 6 (2016 - 2021) | |
| Original | 205/60 R16 |
| Replacement | 225/55 R17, 215/55 R18 |
| --/-- | R16 5x114.3 6J ET50, R18 5x114.3 7.5J ET60 |
Alternative discs Mazda 6
- Cast: light weight, low pressure on thrust bearings, hub, transmission;
- Stamped: durable, expensive;
- Forged: durable, one third lighter than analogues.
| Name | Manufacturer |
|---|---|
Light alloy | AITL - 534, 605 Alcar - Hybrid Allante - 184 (HB), 561 Alutec - Freeze, Grip, Ikenu, Monstr, Raptr, Singa, Xplosive Angel - Hornet 601, Rapide 609 Arbet - 1 ATS - Emotion, Streetrally Autec - Hexano, Ionik, Nordic, Polaric, Quantro, Skandic, Wizard, Xenos, Yucon, Zenit Autom - 569, 803 Borbet - CA, F Disla - Evolution, Formula |
Stamped | KFZ - 6525, 7503, 7625, 7855, 7856, 8005 ZW - BK5372 (BP) Tech Line - 640 Tomason - TN11 TRW - Z1108 (DGMF) Vossen - CV3, VFS-5 Wheel Master - 0366 WSP Italy - W1704 ZD - 21 ZF - FM039 (BMF) |
| Replica - Mazda SSL016 (HS), NS5264 Rial - Arktis Sportmax Racing - 1235 Storm - BK-438 Tech Line - 1603 Lawu - SL-511, YL-245, YL-828 LSW - L-335 Mak - Nitro Marcello - MR-07 PDW - 8052 Racing Wheels - H-126 RC Design - RC-11 Replay - NS38 |
|
European brands | Disla Assassin Black Matt, Gunmetal Diamond Dotz Dakar Hamann HA1005 (MB) (BMW) Kapitan Berlingo / Partner 1998-2002 Black Kormetal KM 225 Firebird, KM 250, KM 245 Tornado Kosei RX SUV Replay A101 (GMF), A25 (GMF) Replica legeartis A47 (SF), A513 (BKF), A521 (BKF) Tech Line 311 BD, 503 BD, 526 BD Vianor VR13 (SF), VR16 (BKF), VR29 (GMF), VR32 (SF) WSP Italy T562 Amalfi AU62 Silver, W1006 Cayenne PO06 Chrome, W1050 Philadelphia Antracite Polished, W1052 Corsair GT3 / RS FL.F PO52 Glossy Black |
* check prices in stores at the time of purchase.
- Check the wheel balance on a special diagnostic stand in the workshop. If deviations are found, restore the geometry of the structure. It is impossible to "reanimate" the disk on your own due to the lack of the necessary equipment;
- If you find cracks, dents on the rim, contact the service station for prophylaxis, rolling;
- At high, medium speed modes, avoid getting into pits, bumps. The disc is deformed, the tightness is broken, the tire cord is damaged;
- Pay attention to the pressure in the tires, it should not differ from the manufacturer's recommended pressure. In case of deviation, pump up yourself, contact the service station;
- Observe the transition to summer, winter modes. In summer, the tire pressure is 0.15 atm higher, in winter it is lower by the same amount. The parameters are indicated in the vehicle operating instructions;
- Tighten the nuts on the rim with a torque wrench. Excessive tightening tends to break the studs, weak tightening leads to unscrewing. Which will lead to a collision on the road with an oncoming traffic participant.
In sunny weather, cast aluminum wheels are less susceptible to destructive external influences. But in the slush, ice, when the road is strewn with chemicals, the rim lends itself to corrosion. This provokes paint peeling, destruction of the molecular composition, and a decrease in the strength of the structure.
Wash the wheels as soon as they become dirty. Since it is unlikely that it will be possible to clean it with a rag, use high-pressure compressors. Equipment of this class is available at many service stations, workshops, service centers.
Systematic polishing helps to get rid of scratches. Pre-clean the wheel from dirt, dry thoroughly, and then treat with a chemical. Wipe with a rag several times.
Store wheels in a suspended position, do not stack on top of each other. Clean from dirt, dry, wrap with cellophane. Some motorists practice applying an aerosol to the surface before conservation.
The average service life of original disks is 180 - 200 thousand km. With moderate driving style, the change interval will increase by one third. The resource of using tires is 70 - 80 thousand km.
What does the installation of disks of freelance sizes on a Mazda 6 car affect?
The size of tires, disks affect the technical characteristics of the machine. The instruction manual contains the recommended and permissible dimensions.
For a driver using the car as a means of transportation, the "factory" (stock) rim sizes are more than enough. In case of tuning, changes in standard characteristics, dynamic performance, "change shoes" the car in non-standard wheel sizes.
The list of characteristics that are changed by installing extra-standard wheel sizes on a Mazda 6 car:
- Controllability;
- Road grip;
- Sharpness, responsiveness of the steering wheel;
- Aquaplaning;
- Comfort;
- Noise level;
- Combined fuel consumption;
- Tread wear.
Decoding of marking of disks, tires on Mazda 6
For example, R19 5 × 114.3 6.5J ET50 (see photo):
- PCD (Pitch Circle Diameter) diameter of the circle of the center of the fixing holes: 71mm;
- Disc radius: 19;
- Number of holes 5;
- Fastener type: М11.0 - diameter of the stud;
- Thread Measurement (Pitch): 1.25;
- Center hole diameter: 67mm;
- Pressure (front / rear): 2.0 / 2.0 bar.
PCD parameter: distance between centers of opposite holes. Measurement with a ruler without dismantling the wheel. For a five-bolt design, the resulting distance must be multiplied by a factor of 1.05.
Rim Overhang ("ET"): The distance between the point of contact between the disc and the hub and the middle of the rim width. Designation: DEPORT, OFFSET. The offset is positive if the plane does not go beyond the point of contact, otherwise the offset is negative. The further the rim is from the body, the more the offset tends to zero.
- D is the diameter of the central hole, measured in millimeters.
- J, H and subsequent characters alphabetically indicate the markings of the humps on the rim shelf. Symmetrical, asymmetrical and combined.
- The "hum" is the lip on the rim for a tubeless tire. When driving, the "rails" hold the beads of the tire, preventing depressurization.
Numeric characters indicate the release date, month, year.
- TUV is an abbreviation of a supervisory authority for compliance with quality standards.
Maximum wheel load: the unit of measure depends on the country of the manufacturer of the rubber, rim.
Using automatic selection of tires and wheels for the car Mazda 6, you can avoid many problems associated with their compatibility and compliance with the recommendations of the car manufacturers. After all, they have a huge impact on a significant part of the vehicle's operational properties, primarily on handling, fuel efficiency and dynamic qualities. In addition, one cannot fail to note the importance of tires and rims as active safety elements. That is why their choice should be approached as responsibly as possible, that is, with knowledge of a number of parameters of these components.
Unfortunately, only a small part of car owners own such technical nuances. Regardless, the automatic selection system will prove to be extremely useful, as it will minimize the likelihood of incorrect selection of wheels or tires. And there is plenty to choose from, thanks to the widest range of such products presented in the Mosavtoshina online store.
