1) Open the suitcase by pressing the latch, which opens the lock. The suitcase will be open

2) Check the initial combination of numbers - the code should be set to 0-0-0.

3) Press the button to open the lock and, without releasing it, twist the numbers to get the number you need, for example, 123

4)Release the button - the code is set!

• Your suitcase has a TSA 002 lock.

Many of our clients ask the question after receiving their suitcase: “Where is the key to the lock?”

Currently, the American transport security association TSA (Transportation Security Administration) practices special rules for inspecting passenger baggage at all US airports. Service agents have the right to inspect any luggage that they consider suspicious without the knowledge of the owner. Moreover, if your suitcase or travel bag is locked, authorized TSA employees have the right to break it. However, TSA does not bear any responsibility if luggage or locks are damaged. Agree, not a very pleasant prospect.

TSA representatives themselves suggest that passengers do not lock their luggage, but simply close it securely, or tie it with strong tapes or straps. This may also not suit passengers, since in the process of moving luggage, quite a lot of people come into contact with it, in addition to the owner. And no one will undertake to guarantee complete safety for things.

However, there is another, in our opinion, the most optimal way out of this situation. Modern luggage manufacturers equip their suitcases, travel bags and other travel accessories with a specially designed lock, which by analogy is called a “TSA lock”. In appearance, it may be completely different from any other combination lock, but it has one main addition. TSA code locks have a key, which the owner of the suitcase does not have.

Let's explain in more detail.

Regardless of the type of TSA lock, be it a combination lock or a lock with a key cylinder, customs officers and airport services have special universal keys with which such a lock can be opened without breaking. After the items are inspected, the luggage is locked again, and in the case of a combination lock, the personal code, which only the owner knows, is not violated. This allows you to completely eliminate the possibility of the lock being broken during luggage inspection. By the way, in the United States, a similar baggage inspection system that allows lock picking has been in effect since 2002, and currently the countries of the European Union are inclined to introduce similar requirements. Therefore, the TSA lock is relevant not only for those who are going on a trip to North America, but also to Europe.

TSA LOCK 002

The lock is TSA certified by the Transportation Association. Such locks have a special identification mark (red diamond), which guarantees protection against damage during luggage inspection.

TSA Combination Lock Operating Instructions

1) Press the large button located on the side; it usually has the inscription PUSH on it, i.e. "click"
2)
3) Find a small recessed button on the inside of the die - it will be located on the same side where the sliders are removed.
4) Take something sharp - a pencil or a toothpick - and press this button. If the button has sunk inside, remove the pencil and proceed to the next step. If not, keep it pressed.
5) Dial your combination of numbers on the wheels, for example, 1-2-3
6) The last step is to press the large PUSH button (if the button was recessed) or remove the pencil (if you yourself held the button pressed).

• Your suitcase has a TSA 007 lock.

Another variant of the combination lock, the installation is different:

How to set a code on your lock:
1) Press the button with the arrow and the key hole down/left, at the same time move the small ribbed button up (next to the numbers)

2) Make sure the zipper sliders pop out of the lock. Check that the initial combination on the number wheels corresponds to three zeros
3) With the buttons pressed, set your combination.
4) Once you have set the code, release the buttons.
Congratulations, your code is installed!

Despite its small size, a lock on your luggage bag or suitcase can give you peace of mind. It prevents unauthorized access and theft of your personal belongings. Each bag model has its own default combination of numbers, usually 0-0-0-0, but each user can change it at any time.

Different models of suitcases have different locking locks: lever, push-button or zippered.

How to change the code on a suitcase with a lever lock?

• Close your suitcase or briefcase. Locate the small lever on your luggage lock. It can be located on the outside next to the dial or on the inside of the lock.

• Set the factory default lock combination. Set the dial to "0-0-0-0", if it only contains three digits, set to "0-0-0".

• Press and hold the small button located next to the watch face. Some bags have a lever next to the dial that you press and push down or to the side as far as possible.

• Once the lever has been moved to the "code setting" position, turn each dial to select the desired number.

• After setting the new combination, move the small lever on the lock back from the “code setting” position to the original position. The combination lock has now been reset and you can use the new combination to open the suitcase.

How to change the code on a suitcase with a push-button lock

• Unlock the bag using the factory combination (0-0-0).
• Choose a new combination. Press and hold the button while spinning the dials.
• After the selected combination of numbers, release the button. Place the zippers into the slot locks, double checking that your new combination is installed.

Changing the code on a suitcase with a padlock

• Enter your lock's factory combination.
• Pull out one shackle of the suitcase lock.
• Rotate the lever 90 degrees and then press and hold it in place.
• Enter your new desired combination.
• Release the lever and place it in the "closed" position.
• Turn the dials around a few times and then enter a new combination to test the lock.

What is a TSA Lock? A TSA lock (TSA lock) is a lock with a customs inspection function. Its main task is to ensure unhindered inspection of your luggage if necessary. TSA locks are required for all travelers planning to travel to the United States.

The TSA Lock was created after the 2001 terrorist attacks in the United States. The TSA (Transportation Security Administration - American Transportation Security Association) scans each passenger's luggage before loading it on board the aircraft. At some intervals, service employees open randomly selected luggage for a more detailed inspection. In this case, if the luggage is equipped with non-TSA approved locks, they will be forced to gain access.

If the baggage is equipped with a TSA lock, if inspection is necessary, customs authorities will open it with a universal master key without confusing the code or damaging the suitcase. There are currently universal keys for TSA locks

TSA-approved locks have a universal master key that makes them easy to open without messing up the code or damaging your suitcase. Only the customs services of the USA, Canada, Great Britain and Israel have such a key. Each TSA-approved lock has an identifying mark - a red diamond - indicating that it can be opened with a master key.

Samsonite provides TSA padlocks and built-in locks (attached to the body of the suitcase) on its suitcases, and customs inspection locks are divided into key-operated and combination-operated locks.

If your suitcase has a TSA combination lock, you'll find our guide on how to change the code useful. So how do you change your TSA lock code?

Built-in TSA combination locks installed on suitcases of the Aeris and S"Cure, S"Cure DLX collections

Built-in TSA combination locks installed on suitcases from the Essensis, Colory, BLite Xtra collections

Built-in TSA combination locks installed on suitcases from the Inova, Spin Trunk, and Cosmolite collections

Built-in TSA cable locks for Duranxt Uprights collection cases

Built-in TSA combination locks installed on Cubelite, Cosmolite, Firelite, Skywheeler, Synconn collection suitcases

Home " Accessories " How to change the code on a combination lock. How to set a combination lock?

1, ZKP-2.

Disassembling a combination lock manufactured by "METTEM" is done as follows.

You need a Phillips screwdriver. Unpack the lock.

The kit includes a lock, escutcheon (locking plate), mate (escutcheon)

Instructions for a combination lock, outside view.

Here, in the photo, are the instructions for the combination lock, in expanded form.

Castle dimensions.

Mechanically, a combination lock is mainly installed on entrance doors to automatically lock when several buttons are pressed simultaneously. It is also possible to change the code.

The front of the castle. It differs in the height of the buttons. The thicker the door, the higher the buttons. ZKP-1 Installed on doors with a thickness of 24-35 mm, and

ZKP-2 Installed on doors with a thickness of 40-45 mm

The moving parts of the lock are steel, nickel plated. The number of possible codes is more than 1000. The number of recoded buttons is 10. Gross weight (kg): ZKP-1 – 13, ZKP-2 – 14.3.

In the photo of the combination lock, we see a spring block.

Using a Phillips screwdriver, unscrew the screws with a diameter of 4 mm.

They unscrewed it and put it next to it.

Unscrew the remaining bolts from the spring block.

Using a Phillips screwdriver, unscrew the spring block cover.

The cover has been removed. You can get levers.

We see on the “L” shaped lever, a hole into which the bolt falls (near the index finger) and opens the lock.

We take out the lever from the spring block... Here it is, this lever.

Now we take out the combination lock levers.

A lever is a part used to lock the lock, containing security elements in the form of code sections.

Here in the photo you can see that one corner is worn off.

We see that the plates (levers) are in a non-working position - with bevels OUTWARD.

The spring cover is open, the coding plates are visible in the photo.

We press the buttons (bottom) and the levers come out a little and we see that they are in the NOT coded position. Because each of these plates has a small cut. The cuts of the plates on the buttons included in the code combination are directed inside the lock body, and the cuts of the plates of the buttons not participating in the code combination are directed outward. Since all the edges face outwards, the lock has no code.

Outward cuts.

Remove the corresponding plates. Turn them over so that their cuts are directed inward towards the lock.

Remove the plate by hand or tweezers.

Here is one plate encoded.

Let's turn the plate over on the other side.

Here is the installed code "38". Usually this code comes “by default” from the manufacturer. If a different code is needed, then we turn over the buttons corresponding to the code number. The code may consist of one digit or several (no more than the number of digits and plates). From one to 10.

I press the buttons.

Here we see the code “38” is pressed. Assembling the lock is carried out in the reverse order.

When buying a bicycle, the first thing you need to think about in order to protect your vehicle from hacking is, of course, choosing a high-quality bike lock. It could be a u-lock, a chain or a cable, but something needs to protect your bike when parking in the city, even if it's a dedicated bike rack in a decent location.

Many people prefer a combination bicycle lock - due to the lack of a key, it seems more practical and convenient to use. In the end, the key can be lost, but the code just needs to be remembered - although this can be a problem, but that’s not the point now.

Why do you need to change the code on your bike lock and how to do it yourself

Since most manufacturers install a standard combination of numbers on bicycle locks, for example, 1111 or 0000, we advise you to change the code on the bicycle lock immediately after purchase. This should be done for basic security reasons, since if someone decides to steal your bike, the first combinations that the thief enters will be the standard ones from the manufacturer - for good luck, so to speak. Unfortunately, some people just leave the basic combination of numbers, which greatly simplifies life for thieves and complicates it for themselves.

This procedure is not as complicated as it might seem at first glance. Below you can find step-by-step instructions on how to change the code on a bicycle lock in a minute:

* open the bicycle lock using the old code;

* from the end on the code part of the lock it is necessary to turn the ring in the direction marked by the arrow, this should be done until it stops;

* Now we change the code - set our own combination, for example, 5603;

* Please note that the combination must be placed opposite the mark or arrow on the lock;

* Be sure to remember the new code, otherwise you will have to break into the lock of your own bicycle, which is much more difficult;

* return the ring to its original position by turning counterclockwise;

* close the lock and enjoy the result.

It will only take you a minute to set a new code on the lock. You can perform such manipulations as many times as you like.

Well, now you know how to change the code on your bike lock without much effort. We hope you find this information useful. You can learn more about the range and features of using coded anti-theft bike locks on the company website bikelock.ru.

Combination locks provide a high level of security for the premises, since they are quite difficult to crack, much less open with a found key or a special master key. Thanks to the development of new technologies, such devices are becoming not only more reliable, but also more affordable every year. Today, most entrance doors of apartment buildings are equipped with a combination lock. Owners of office buildings also appreciated the convenience of mechanisms with the ability to open the door with a unique code.

It was possible to ensure a high level of secrecy due to the ability to change the code combination. Changing the lock password may be necessary in various situations. For example, after renovation work, it is worth changing the code to limit access to workers who knew the previous combination.

Types of combination locks and how to change the code

Today there are several types of combination locks, which differ in the degree of secrecy and operating principle. Let's look at how the code is changed on each type of lock.

Mechanical combination locks. This type of device is considered obsolete, but, nevertheless, it can still be often found. To change the code on a lock with mechanical buttons, you will need to partially disassemble the case to gain access to special plates. Each of the plates corresponds to a button on the dial pad and has a slight bevel on one side. By removing the plate and placing it at an angle towards the center of the lock, the corresponding button becomes part of the code.

Electromechanical andelectronic combination locks. Such devices are more practical and are very popular due to the possibility of integration into an overall access control system. Electromagnetic combination locks can be found in almost all apartment buildings, and in recent years they have become in demand among owners of country cottages, where they are installed on the entrance gate.

Changing the code for electromechanical or electronic locks can be done in two ways, depending on the selected model:

Using code, which puts the device into programming mode. A special code allows you to put the lock into the mode of changing the code combination, after which you need to enter a new code. Having returned the lock to the standard operating mode, you need to make sure that it works with the new number combination.

Using a special key. Such models are equipped with a special key; it allows you to put the lock into a mode in which it is possible to set a new code. All that remains is to enter another combination of numbers, remove the key and check the functionality of the device.

Regardless of the type of combination lock, changing the secret combination of numbers is carried out within 5–7 minutes and does not require special skills, but if this procedure seems complicated, it is better to seek help from specialists.

Today, men's briefcases, man purses and clutches are most often equipped with combination locks.

By default, the factory settings set the codes to "0". In this case, you can use it to prevent accidental opening of the lock - after closing the buckle, simply scroll the dial, then, returning the values ​​to zero, you simply open the lock.

But if you plan to use a combination lock on your briefcase, purse or clutch, using all its functionality, then consider How to change the code on a combination lock.

So, first, let’s determine which way your lock opens. Typically, combination locks are opened by sliding up or down the top key of the lock or a specific button.

In order to change the code value on a combination lock, we need to move this key (or button) in the opposite direction from opening and, holding it in this position, change the numbers by scrolling the lock's digital dials. These manipulations must be carried out on an open briefcase (that is, when the parts of the lock are not closed).

All!)

Now all that remains is to check whether the lock operates against the code you set. Good luck to you in your endeavors.

Well, if you need buy quality or briefcase,then you've come to the right place su). Fast delivery Guaranteed!

As a rule, you can, in some cases, the cost of a men's purse for retail customers in our store must include a moderate retail markup. Wholesale price displayed on the product page by default.

We can offer wholesalers, online stores, and joint venture organizers (joint purchases) the lowest price and high quality of products and service.