Every car owner wants his car to look solid and be as comfortable as possible. One of the types of tuning that is used in this case is glass tinting. In this article, we will learn about the main aspects of such an upgrade.
Pros and cons of window tinting Choosing a film for tinting Car window tinting with your own hands Materials and toolsPreparatory stageThe tinting process Useful tips $ (".index-post.contents"). ToggleClass ("hide-text", localStorage.getItem ("hide-contents" ) === "1")
Pros and cons of window tinting
Consider the main advantages of tuning:
in the heat, the interior is less susceptible to heating; the upholstery material does not fade; plastic interior products do not overheat and do not lose their appearance; presentable appearance of the car; both passengers and things left in a closed car are hidden from prying eyes; the driver's eyes are less affected by the blinding rays of the sun or oncoming headlights, the light of a car coming from behind; in the event of a collision, the glass will not crumble, but will remain tinted.
Disadvantages:
the visibility is reduced, especially at night, which makes parking difficult and can create an emergency; in the flow of a large number of vehicles, the mirror ability of the film will blind other drivers; too high density of tinting layers can cause window regulators to break down; non-compliance with state standards is the cause of fines.
Did you know? In China, tint film with the image of a famous character (singer, actor) is popular.
The choice of film for toning
There is a large selection of tint films on the market today. To figure out which film to give preference to, we will consider it according to several criteria.
Cost and quality:
The leaders in the production of this material are the American companies LLumar, 3M, SunTek, SolarGard. The quality is undeniable, which affects the price. The 3M company (USA) offers a budget version of the product, the line includes such films as Black Shade, Metallic Shade. The quality is not inferior, but the price is several times lower. The Chinese manufacturer offers the cheapest products, but they quickly fade and lose their external gloss.
By destination:
Sun protection (ultraviolet and infrared radiation). Impact resistant (consists of more layers). Decorative (emphasizes the individuality of the car owner).
By manufacturing method:
Unmetallized - polymer, acrylic and painted layer. Affordable, does not create problems in the operation of mobile and navigation systems, there is no mirror effect. Does not last long. Metallized - in addition to the main layers, it contains metallized. Has a mirroring effect, lasts longer and protects against ultraviolet radiation more effectively. May interfere with mobile communications and navigation systems.
In addition to the above criteria, it is important to consider the ability of the film to transmit light.
Learn about removable, silicone, electronic, chameleon tinting; front glass tinting according to GOST; toning, which the device "does not see".
Light transmission options:
5% - the interior is not visible from the outside; 10% - the outlines of people in the cabin are noticeable; 15% - silhouettes are clearly visible; 20% - faces can be seen outside; 35% - by looking closely, you can see the entire interior; 50% - even small details inside the car are visible ...
After considering all the criteria and determining the toning function, it will not be difficult to make the final choice.
Did you know? According to the world statistics of the study of road accidents, tinted cars are less likely to be their participants. This is explained by the fact that drivers are not distracted by the study of those sitting in neighboring or oncoming vehicles, but are entirely focused on the road.
DIY car window tinting
Car tinting at home is not difficult. In this case, the main thing is accuracy and adherence to the rules of work.
Materials and tools
Materials and tools required for work:
film; sponge; utility knife with a wide blade; spray; water and detergent; plastic spatula; sharp knife for cutting material; hair dryer.
Learn how to remove old tinting and how to wipe off the glue from the tinting.
Preparatory stage
Let's prepare the work surface:
Pour water into a spray bottle with a few drops of detergent and shake. Spray the compound onto your work surface.
First, go over the hard side of the sponge.
Then, with a utility knife blade, go over the entire glass, especially carefully - in the corners where the most dust collects.
Wash off again with detergent.
Important! Before work, you should clean the glass as thoroughly as possible, since any speck can create a bubble.
Open the roll of the selected material, place it on the outside of the dampened glass and, leaving about 2 cm around the edges, cut it off.
When making a pattern, leave 1 cm of film at the bottom (under the eyelash) and a few millimeters along the rest of the edges to avoid a gap. The top needs to be trimmed to fit the edging.
Cut the pattern carefully with a sharp knife. Cut off the top first, then the sides.
Make sure there are no gaps by looking at the work from the inside. Now lift the glass and cut the bottom edge. The pattern is ready.
Tinting process
We proceed directly to pasting:
Rinse the work surface with a spray bottle and go over it with a spatula. Rinse again.
After separating the unnecessary layer, generously moisten the work surface and glass surface. Take the film by the edges and attach it to the glass, moisten.
Spread the material very neatly left and right, paying particular attention to the edges.
Check how the tinting looks from the outside. If there are no bubbles, dry everything with a hairdryer. The work is done.
Useful Tips
Experts recommend using Johnsons Baby shampoo: this product provides the easiest film glide possible. Try to cut the edging with one movement of your hand, without lifting the knife. This will give the most accurate result, without any ragged edges. Moisten the glass regularly - the material and the surface should be in close contact. A better quality and easier-to-work film is considered to be made in the USA. The Chinese film is very thin and there is a very high probability of scratching or kinking it. The American material is denser, peels off easily and is easily tucked in along the edges. Moreover, it is more elastic. For beginners, it is better to remove the eyelash before work to avoid creases. Please note that a completely closed glass goes a little into the seal, so the glass on top must be lowered. Smooth the film sideways, never up and down. Be sure to remove all air and all liquid. If the film has slipped a little, you can correct it by pulling it in the right direction while it is still wet. Always leave a margin on the edges, do not overdo it, so that later wrinkles do not appear. When working with a spatula, you need to be extremely careful and not squeeze it into the material so as not to scratch it.
In more detail, the tinting process can be viewed in the following video:
So, the process of tinting a car can be done at home, while saving on payment at a car dealership. This procedure is simple and requires only care, accuracy and accurate calculations. However, before traveling abroad in your car, you must carefully study the rules and laws adopted regarding tinting.
How to tint a car? This is a question that deserves special attention. The appearance of a vehicle with good design and amazing tuning is what attracts the eyes of everyone around. Toning refers to tuning elements. It is worth considering in more detail the question of how to tint a car, because thanks to tinting, the car will acquire charm, shine and presentability.
The tint film, among other things, prevents many unpleasant effects on the car. Among them is the burnout of the trim, dashboard, acoustics and audio equipment. In addition, the tinting will create a barrier that prevents the sun from dazzling the driver.
When tinting with a film, car windows are not dismantled. Maybe only the door panels are removed - and that is very rare. In addition, it is a very quick process: the car can be completely tinted in three hours. This does not scratch the glass. Another plus that a tint film for a car possesses is that it can be removed at any time, and the glass will remain intact. It is also heat-resistant: it is not afraid of overheating or frost. It does not shine, demetallize, flake or bubble. Plus she doesn't miss
How to tint a car with your own hands? Not as difficult as it might seem. This will require an eraser spatula, shampoo, knife, blade, ruler, and tape.
How to tint a car correctly? First, you need to wash it thoroughly, washing off all the fat from the glasses. If you do not do it efficiently, then hairs, dust particles will clog under the film, and this is fraught with a bad result. Then you need to measure the glass (a allowance of five centimeters on each side is taken into account), and you can proceed to the film, or rather, to cut it. We need to find the transparent side of the film. Then you should take the film and sprinkle it abundantly with water, in which there is a sufficient amount of shampoo. The film must be damp, or even wet. Then it is divided to the end (you need to make sure that its sides do not stick together), and the transparent part is thrown away. The adhesive side of the film is applied to the car glass. Then you need a rubber eraser, which will need to drive the water to the edges from the center. The film must be held so that it does not slip. Attention! You need to remove ALL water. Then, after an hour, you can cut the film. But in no case is it exactly along the edge - for this you need to wait about 8 hours. You can dry the film with a hairdryer to improve the result.
How to tint a car, or rather, its rear window? The film is attached to it in a different way. You need to first carefully examine it, then wash it thoroughly. Fastening starts from the top. The washing liquid must be distributed over the top of the glass that has already been washed. Then, 1/3 of the film is separated and the liquid is abundantly sprayed onto its surface. The same operation will need to be repeated with the remaining 2/3 of the film. As already mentioned, you will need to wait a few hours, after which it will be possible to adjust. And finally, advice: for the first 2-3 days, you do not need to open windows in order to avoid possible deformation (this is if the film is not of the highest quality).
Many people are interested in how to glue the tinting on the car. This is a rather complex process that requires compliance with a number of conditions. First of all, it is recommended to choose the right material for tinting. It must meet certain criteria. Strict adherence to the manipulation technology is of no small importance. This will help you avoid common mistakes.
According to legal requirements, the tint of the windshield should be no more than 25%. For side windows, 30% is considered an acceptable parameter. In addition, it is allowed to put a reflective film on the windshield. Its width should be no more than 14 centimeters. Such a device improves the driver's view.
There are no such restrictions on the rear windows. At the same time, the law prohibits the use of a mirror coating. With strong light reflection, there is a danger of accidents. Front windows - side and windshield - should not lead to distortion of some shades. These include red, white, yellow and green. Otherwise, it will cause additional violations. In modern cars, windshields transmit no more than 80% of the light. Therefore, there is no need to tint them. The same applies to the front side windows. The lightest tinting film absorbs 10-20% of light.
Therefore, there is a high probability of exceeding the norm. This will result in fines.
If you plan to tint your car, you should definitely evaluate the percentage of light that the film lets through. To do this, it is recommended to contact the toning point. With the rear windows, things are much simpler. In this case, there are no strict restrictions. The above-mentioned mirror coating is considered an exception.
Varieties
Today, there are many known ways to darken a car. If you plan to do it yourself, it is recommended to use a film. In this case, it is worth familiarizing yourself with the rules for choosing a material and recommendations for fixing it.
Simple
For a simple material, a black glue base is characteristic.
Multicolored
Films of different shades can be found on sale. This allows the car owner to choose the appropriate option.
Transparent
Such material can be covered with different patterns.
Metallized
With rolling colors
The color of this coating gradually changes.
Chameleon
This material is characterized by a mirror-like surface.
Silicone
This is a fairly popular modern material that many car enthusiasts choose.
Perforated
This film is supplemented with various holes.
How to choose a tint film for a car
There are a number of criteria to consider when choosing a film for tinting. Many companies are engaged in the production of such a coating.
Suntek
This is one of the most popular manufacturers, whose products are in demand all over the world. The range of the company includes different materials - mirror, metallized, energy-saving films. Innovative formulations help protect against the harmful effects of ultraviolet radiation.
There are materials with anti-reflective properties. They do not fade over time and are even capable of trapping glass fragments in an accident.
Llumar
The company offers many interesting options. A two-layer film, which has a deep color, is considered popular. It is made by metallization. The material protects the interior from heat and helps prevent paint fading. The coating from this manufacturer is allowed to be thermoformed. Thanks to this, it fits perfectly on curved glass.
Sun-gard
Such films help to protect the car from the negative effects of sunlight. After some time, ultraviolet light provokes fading of interior elements, plastic items and leather. In addition, the sun causes glare, which creates dangerous situations on the road. The use of toning material helps to avoid such problems.
SunControl
This film is produced by an American company. It is very popular because it combines high quality and affordable cost. The company's arsenal includes metallized and non-metallized coatings. They have a scratch-resistant surface.
SolarGard
These films are quite expensive, but they are still very popular. The company's arsenal includes many series that differ in the degree of light transmission. This parameter ranges from 5 to 37%.
The company offers its customers two-layer films, which are characterized by deep coloring and are made by metallization. Thanks to this, it is possible to achieve protection against heating and to avoid fading of the painted layers. The coating can be easily thermoformed. As a result, it can be easily applied to curved glass.
Preparing to work with a car
In order to use the film to bring the desired results, it is recommended to properly prepare for the toning procedure.
Calculation of the required material
First of all, it is worth stocking up on sufficient coverage. When buying material, it is important to consider that when trimming it, the loss will be 20%.
Water spray
This tool is required to apply the soap solution to the surface of the vehicle.
Liquid soap or detergent
Such a tool is necessary for glass processing.
Stationery knife
With the help of a sharp clerical knife, it will be possible to cut the film with the highest quality and evenly.
Lint-free napkins
It is important to pay attention that the napkins are fluff-free. Otherwise, small particles will remain on the surface of the vehicle.
Distillation
This device helps to remove the solution from under the film.
Special scraper
With this tool, the surface of the car is cleaned.
Electric hair dryer
This device may be required to repair small defects on the surface of the material.
How to properly tint side windows at home
To stick the film on the side windows, it is worth performing a number of sequential steps. First of all, it is recommended to cut the material correctly. This is done depending on the size of the glasses. It is recommended to first determine the location of the adhesive side. Then, from the outside, it is worth moistening the surface with soapy water. This is done using a spray bottle.
It is recommended to fix the material on a damp surface. At the same time, it is carefully smoothed with a rubber spatula and the edges are cut with a knife. It is important to leave 1 centimeter of material. These fragments are placed under the seals. It is recommended to cut the material carefully so as not to damage it and not damage the integrity of the rubber seals. It is recommended to carry out this procedure after completely smoothing the film.
It is also permissible to use liquid tinting. This method is characterized by applying a special composition to the surface of the machine. As a result of distribution over the glass surface, it leads to the appearance of a darkening layer.
Do-it-yourself rear window pasting process
In order to cover the rear windows with tinted film yourself, it is recommended to wash them thoroughly. This should be done not only from the outside, but also from the inside. Then tinting is done in the following sequence:
- Attach a 1.5 meter wide film to the rear window, cut it along the contour, leaving a small margin.
- Heat with a hair dryer, smooth the film with a spatula and spread it from the center to the edges. The material should be heated carefully. When overheated, it deforms, which provokes damage.
- Using the interior lighting, cut the film along the contour. The size of the workpiece should be 2 millimeters larger than the white glass. This means that it should go slightly beyond the black border.
- Thoroughly wash the glass before sticking the material. Even small particles of dust lead to the appearance of air bubbles.
- Rinse off foam with water. A pressure jet should be directed at the glass.
- Remove the protective layer from the film. Moisten it with soapy water at the same time. The material has 2 sides - lavsan and toning. The second is adhesive. It is important to install the tinting material correctly.
- Open the door and apply the film. This procedure is recommended to be done together. The workpiece should be brought in smoothly, without making any sudden movements. Do not touch the adhesive side or raise dust. It should be borne in mind that it is more difficult to glue the film in a sedan than in a hatchback.
- Attach the material to the glass surface and gently straighten and smooth it with a spatula. It is worth removing air and water with smooth movements. This is done from the central part to the edges.
- Remove excess water with a rubber spatula.
- To smooth the film in a sedan, use a long-handled distillation. This makes it easier to access the edges.
- For faster drying of the adhesive layer, a hair dryer is used.
Although the job seems straightforward, it can be tricky to fit the material onto the rear window properly. It may not work the first time. It is not recommended to rush to achieve good results. All actions must be clearly performed in accordance with the instructions.
Possible problems and solutions
When tinting a car, various problems may appear. To avoid this, you need to strictly follow the technology of the procedure.
Air bubbles
It is worth dealing with this problem at the initial stage. This is done before the film dries. After finishing work, it is recommended to carefully examine the windows. If bubbles are present, they are removed by distillation.
If the film is already dry, it will have to be softened. It is recommended to do this with a hairdryer or garment steamer. It is permissible to use an iron with a steam generator.
Creases
It is important to avoid the appearance of this problem at any stage. After the creases, noticeable stripes appear. Typically, such disadvantages are typical for Chinese films. Inexperienced craftsmen can easily spoil such material.
Stripes
Stripes appear due to creases. With a crooked gluing within a few hours, the material can be saved. To do this, it is recommended to cut off the excess, and compensate for the deficiency by moving the film. This can be done if there is stock left on the back side. To do this, you need to warm up and remove the tint. Then spray the solution and glue it properly.
Points
Sometimes, after tinting, all kinds of dots appear on the glass. It is recommended to remove them immediately after gluing the glass. If the film has already set, it is recommended to warm it up.
In order for the tinting to be successful, during the procedure it is worth adhering to a number of recommendations:
- It is always recommended to install the film from the inside of the passenger compartment. When placing the material outside, there is a risk of quick damage.
- When buying material, you should not give preference to the cheapest one. Poor-quality film does not adhere well to the surface. Even specialists fail to achieve good results. It is better to buy a removable film that can be re-glued if desired.
- It is recommended to smooth the material carefully. It can be easily scratched.
- It is worth pouring clean water into the sprayer without impurities. It is not recommended to use tap water.
- Side windows are easy to tint. The rear window can be a problem. Therefore, it is recommended to entrust this work to professionals.
Car tinting is a rather complicated procedure that requires certain skills. To do this work yourself, you should familiarize yourself with its stages and strictly follow the sequence of actions.
To darken the glass of your car using film, it makes sense to master in detail the features of tinting with your own hands.
Dear Readers! The article talks about typical ways of solving legal issues, but each case is individual. If you want to know how solve exactly your problem- contact a consultant:
It's fast and IS FREE!
However, this procedure does not conceal any special pitfalls, but if you pull your hand at an unnecessary moment or do not clean the glass surface really thoroughly, the tinting will not work the same as in the cabin.
Important information
Tinting - covering the car windows with a film (other options - tinting spraying and the purchase of finished windows with such a finish are much less common).
Toning gives a number of advantages, with it the car owner feels less cold in winter and especially hot in summer, the world around him is not visible in the cabin, and he does not hear the world around him.
At the same time, it is more difficult to maneuver in the dark with such windows, and the traffic police are not happy with it. American and Chinese films are available on the market these days.
The first one is certainly more durable and does not cause any comments on quality. The second is a budget option and is able to keep the look for a couple of seasons.
Car tinting is possible both with an appeal to a car workshop, and with your own hands. In the second case, the car enthusiast does not need to do anything complicated, but a number of operations require diligence and care, at no stage can the film be torn, and it must also sit on the surface without unevenness.
Before applying the film, you need to acquire a set of tools. In general, they are elementary, most of them are found in almost all houses. Make sure the knife is really sharp.
Removing the film is also a painstaking process, during which it is necessary to avoid damage to the glass. In this case, it is recommended to carry it out together.
Basic concepts
Car tinting is done in several ways, the most common of which is with the use of film.
In addition, the windows are tinted using spraying, and the car owner can also purchase a ready-made tinted window. However, the option with covering the inner surface of the window with a film is the most common.
Products that have a darkening rate of at least 60% and not more than 90% are considered as tint films; if it is less, then the film is decorative, not tint. The thickness of the coating should be 60–380 microns. The film should be 7-9 layers.
High-quality tint films, after being applied to the car, do not deteriorate from prolonged exposure to both heat and cold, they do not suffer from temperature changes. Also the corresponding surfaces can be washed.
At the same time, tinting for windows, as well as for headlights, is not welcomed by the traffic police. The inspectors of this department consider it a violation and seek to fine for it.
At the same time, tinting the rear window, with your own hands or with an appeal to professionals, is quite acceptable, since the law does not limit the tinting of this window. The same applies to the rear side windows.
Its purpose
The purpose of tinting is to protect the driver and passengers in the cabin from various dangers from the outside.
Among other things with this glass coating:
| The flow of solar illumination inside the car is significantly reduced | This is especially true in summer, when the darker interior elements can warm up to a temperature of 800, while, for example, it becomes difficult to sit in dark seats, in addition, cracks form on them. |
| Blocked the path of ultraviolet radiation | Which is malicious |
| At the same time, the passage through the windows of thermal infrared rays is closed | This means that in summer less heat enters the interior of the passenger compartment, and in winter less energy leaves it. |
| Visual access is closed | To what is happening in the car for everyone around, as a result, the likelihood of theft from the car will decrease |
The legislative framework
The regulatory legal acts that determine the procedure for using the film include:
- "The main provisions for the admission of the vehicle to operation and the duties of officials to ensure road safety", included in, approved by a government decree;
- technical regulations of the Customs Union - TR CU 018/2011, bearing the name,;
- , which describes what glass can be installed on land transport, in particular, it regulates their light transmission;
- (abbreviated to the Code of Administrative Offenses), which describes the penalties for installing inappropriate glass.
How to tint a car with your own hands
It is not too difficult to tint a car with your own hands, since all operations are elementary. At the same time, they are very troublesome and sometimes require precise movement.
It must be remembered that it is certainly possible to spoil the work. A single imprecise action is enough, and the film on the surface will have a visible defect.
It is advisable to tint the glass together, and for its removal this is an absolute requirement.
Which film to choose for glass (removable)
If we are talking about standard tinting, then the car owner has a choice between Chinese products (on average 2.5-3.5 thousand rubles per roll) and American (between 10 and 20 thousand).
Products from the Middle Kingdom are suitable if he seeks to save money. With luck, they can work off their money in the sense that for one or two seasons the tinting will pass without losing its appearance, then it will need to be changed.
It is also worth considering the work - the fact that the service life is shorter also means that the driver will have to remove the old one and glue the new one more often.
American film lasts a long time and does not cause any complaints, but it costs significantly more.
In this case, the film can be multi-colored, so the car owner has the opportunity to find an option with a color for the car body. In particular, you can find yellow, blue and other colors.
An alternative is a removable tinting, which is made of silicone. After fixing it on the glass, it remains on it due to static attraction.
It is relatively easy to remove it, it does not cause any particular difficulties. Then it can be glued again, for this you just need to moisten the glass with a solution of soap or shampoo.
Another option is electrical toning. It is no longer possible to carry out it with your own hands, since the film itself is not available to buyers. It is required to contact the auto repair shop.
This option itself has a number of advantages, but its price is very high. This coating instantly changes its parameters due to a change in voltage applied to the window.
In addition, automatic tinting of two glasses (in the original - Duo Glass) is available to motorists.
This option means that another is added to the opening, along with the main glass, which is controlled independently of the first. The tinted glass is inside.
This option also has its advantages, however, it should be borne in mind that with a weak door opening, it will withstand a double load for only some time. Therefore, this option is better suited for vehicles with stronger doors.
Those who want to do without film at all can choose curtains instead of tinting. Such ordinary curtains are quite standard installed on the machine, like on a window in an apartment, only their size is smaller. At the same time, the appearance of such a design is rather peculiar.
Tools you need
To tint glass, a car enthusiast will need:
- tools for removing glass from the opening;
- a knife, preferably as sharp as possible, it must be borne in mind that the knife supplied with the film can quickly become dull if it is made poorly, it is safer to have your own;
- plastic or rubber scraper (distillation);
- putty knife;
- marker with a point of the smallest possible diameter;
- baby shampoo or soap solution or detergent solution;
- a hair dryer, both industrial and used for drying hair, equipped with a temperature detection function;
- Scotch;
- rags or rags;
- sprayer.
Car preparation
The preparation of glass can be carried out both directly on the car itself, and with the extraction of glass from the opening. It is believed that a more convenient option for gluing the film is with the glass removed.
This is due to the fact that during work, when the glass is in the opening, there is a risk of damage to either itself or other elements of the car.
After removing the glass, it is advised to work in a place where there is no draft, little dust, and also not too cold and not too hot. A good solution would be a bathroom.
If the previous film remains on the glass, it must be removed. How to do this is written in the corresponding section below.
In any case, the glass needs to be cleaned. It should be borne in mind that it is the cleaning that determines the quality of the future tinting, since even if there are large particles on the surface, the canvas can form visible irregularities.
For this reason, after the surface has been thoroughly washed, it is thoroughly cleaned with a scraper. A regular straight razor can be a substitute for it.
Then the canvas is placed on the glass, turning it upside down and fixing it so that it remains in a fixed position.
This is either done using a detergent solution that is applied to the glass surface, or by fixing it with special magnets.
The fixed canvas is marked using a marker with a small diameter pen. At the same time, they do not circle exactly the glass, but the space around it, roughly repeating the shape of the glass, but making an overlap about a centimeter in size. Next, the canvas and glass are separated.
Further, along the mark, a workpiece of the required shape is cut out with a sharp knife. You should pay attention to the fact that no damage is formed on the film that would go inside for a centimeter of the gap.
Next, proceed directly to the sticker.
What is the order of work
The sticker begins with dividing the workpiece, the tint film itself is detached from the substrate. To do this, use scotch tape. With a simple movement, it is attached to the corner of the substrate, and then a slight jerk is made.
The tape separates the backing from the tinting. After that, the two canvases are gradually diluted, while a detergent solution is applied to the film itself, designed to prevent it from reconnecting with tinting.
A similar solution was previously applied to the surface of the window. Next, the film is placed on the glass. Of course, it should be positioned correctly, the room for maneuver here gives a centimeter gap.
As a result, in all places the film should extend at least a little beyond the edge of the window. The next step is to remove liquid and air from under the canvas using a spatula.
This stage requires accuracy, since the canvas itself must be left completely intact. It is necessary that all bubbles are eliminated and their contents removed.
If the glass is not flat, but curved, it is necessary to work with a hairdryer. With its help, blowing the canvas, it is forced to take a shape that coincides with the shape of the bending of the glass.
Then the first drying of the tinting is carried out. It is left for two hours, while not in a draft or under the sun. In addition, a hairdryer is not used for drying, the toning dries on its own.
After that, remove the centimeter surplus of the canvas. This procedure is also done with a very sharp knife. A knife that is not too sharp will not cope with the task, as a result, the film will be damaged.
If, due to certain circumstances, the car owner cannot wait, he can skip this stage, there is no strict need for it. However, this carries a certain risk, and for reliability it is worth waiting a day.
After that, precautions should be taken for a week. Windows that have been worked on should be opened and closed as infrequently as possible.
In addition, do not accelerate too much if the windows in the car are lowered. Finally, they are not washed. At the end of the weekly period, these restrictions are removed.
Video: dimming instructions yourself
How to remove film at home
Removing the film at home is done in two ways. The first is carried out when heated, the second - without heating.
In both cases, it is necessary to act with the utmost care, only in this case it will be possible to avoid damage to the glass.
When working with heating, they act with a hair dryer, either industrial or ordinary for home use. This requires two pairs of hands.
One person heats up the window leaf, while the calculation is to raise the temperature to 40 °, in this case the glue will melt, but not the film. Melting of the latter can be avoided by not heating the glass more than this indicator.
After warming up for a certain period, the edge of the tinting is pryed off with a knife and separated from the window itself, pulling it off not too quickly.
With sudden movements, you can tear off part of the canvas, and the rest will stick to the glass again. With precise actions, the web is completely disconnected.
The second option (without heating) means the next sequence of operations. First of all, the edge of the tinting is separated from the glass with a knife.
In both cases, any remaining glue from the surface is removed with a scraper (or also with a straight razor). Finally, using acetone or a cleaner, remove those fragments that were not successful using a scraper.
Advantages and disadvantages
The popularity of tinting is due to the fact that it has a lot of advantages. At the same time, this method of glass decoration also has disadvantages.
Among the properties that make tinting popular:
| Strength | Making it possible, among other things, to protect the face and other parts of the human body, glass due to tinting during an accident will not fly into the driver and passengers, it will delay the fragments even if a heavy object is struck directly into it |
| Solar radiation protection | As a result, the summer can be avoided heating the interior of the car, in particular, dark-colored surfaces with ordinary glasses can heat up to 800 |
| Heat protection | In winter, tinting, on the contrary, will not release heat from the passenger compartment. |
| Noise protection | In a tinted car, a powerful street rumble is noticeably less audible. |
| Visual inaccessibility of the salon for everyone outside it | In particular, they will not see valuable things if they are left in the cabin (few are ready to take risks by hacking a tinted car at random), and the environment inside the car will be more psychologically comfortable for those who do not like to be in sight |
| Improved appearance | The tinting gives the car a certain elegant aggression in overall feel. |
The disadvantages of toning include:
| Difficulty in driving at night | Including in winter, when the dark time of the day is longer, it is difficult for the driver to get into the parking space in reverse, and in the stream he can only see his own reflection in the tint |
| Reduced visibility for drivers | Following the owner of a tinted car, they see worse those in front of him; as you know, when driving, the driver needs to focus not on one, but on several cars driving in front, as a result, if a tinted car is braked in front of the driver, then the driver behind him will only see his braking, and there may not be enough time to react, which will lead to an accident |
| The relative complexity of car tinting | You don't need to be a professional here, but if you make a mistake or just act inaccurately, then the coating will turn out to be of poor quality, it will look bad |
Separately, it should be noted that traffic police inspectors have a negative attitude towards tinting. They tend to pick on this coverage and, if possible, charge car owners a fine.
Thus, it is certainly possible to tint car windows with your own hands, but a car enthusiast will need a set of tools and care.
Subject to all the rules, he will receive a coating that is quite comparable to that made in the workshop.
It is also relatively easy to remove your old film, but in this case the car owner is required to act in accordance with the procedure.
APPLICATIONS AND CALLS ARE ACCEPTED 24/7 and WITHOUT DAYS.
How interesting and modern to give the windows of your favorite car a new look? Of course, make a high-quality tinting. To do this, it is not at all necessary to visit bus stations, where window tinting services can cost you a pretty penny, just be patient, high-quality material and time. The sticker on the car of special films on the shoulder is almost any car owner. And soon you will be able to enjoy the result of your labor.
Window tinting at home is quite a serious and responsible process. For tinting the windows of your car, it is advisable to use special tint films. How to properly apply them to glass, further in the article.
Must be performed in accordance with established standards and GOSTs. Therefore, before starting work, familiarize yourself with all the necessary toning standards.
Further, the main working material will be a tint film, so its choice must also be taken seriously. It is on the quality of the selected material that will depend on how high-quality and durable tinting you get as a result.
Currently, global manufacturers offer a wide range of tint films for every taste. It is advisable to choose a tint film in specialized salons with a warranty from the seller.
Required materials for tinting:
Tint film (roll);
Spatula or construction eraser (rubber);
Detergent;
Spray
Car window tinting process:
1. Tinted glass must be carried out in a dry ventilated area.
2. It is possible to carry out tinting at home only for side windows (for the rear window it is necessary to involve a specialist, since this window is tinted using a special technology.
3. Car glass must be prepared for tinting. To do this, use a detergent and a spray bottle to thoroughly wash the glass so that no dirt, dust and streaks remain on them.
4. Take the tint film, cut it into separate pieces, after making measurements of the glasses. Along the perimeter on each canvas, leave allowances of 5 mm. In order to correctly take measurements, it is necessary to moisten the glass with soapy water and attach the film with a protective layer outward. After that, carefully using a knife, cut the required size of the film.
5. Then you can apply the film to the glass. You need to tint the glass from the inside of the glass. To do this, first apply a soapy solution, remove the protective layer from the film and stick the film on the glass. At the same time, try to remove the protective layer not immediately, but gradually.
6. Using a spatula or eraser, gently level the surface of the film to avoid air bubbles. The alignment of the film surface must be carried out from the center to the edges.
7. After applying the film to the glass, use a knife to remove excess parts of the film, thus precisely adjusting the film to the size of the glass. Dry the glass with a building hair dryer.
After the glass tinting process is over, leave the car for a few days for the film to sit on the glass, while leaving the glass stationary. Only after this time can you install window seals and safely use the car.
May be of interest to:
Scanner for self-diagnosis of the car
